I am trying to create Sendgrid resource. Couple of days before it was working fine. From Yesterday I am getting the following error. Any Solution please.
vso[task.logissue type=error]- Resource Sendgrid.Email/accounts 'XXXXXXXXXXX' failed with message '{%0D%0A "error": {%0D%0A
"code": "ResourcePurchaseValidationFailed",%0D%0A "message": "User
failed validation to purchase resources. Error message: 'Something
went wrong. If you think this is an error please contact our support
team.'"%0D%0A }%0D%0A}'
Please be advised that the sendgrid purchase needs to be done by the Account Administrator and/or any other user with Owner RBAC role assigned to it.
Also if you have the right permission set, i would suggest you to check the account creation limit, it could be because of that also.
If this doesn't work , please go through the network trace file and check what is causing the issue and try to perform the step.
For network trace , you can do the following step and post it in your question:
Open Internet Explorer
Press F12 (This action will opens a window at the bottom of the main IE window)
Select the “Network” Tab (selected by default)
Ensure the Clear entries on navigate button is selected(button with a blue arrow pointing to the right,
and a red X in the upper-left corner)
Note: By default this option is selected. When this option is de-selected it will allow sensitive information such as any usernames and
passwords to be saved in clear text in the capture file. Microsoft will NEVER ask you to provide your password as part of troubleshooting so it
is imperative that you leave the
Clear entries on navigate option selected or you will need to manually delete the password from the trace file
before sending the trace to us for our investigation.
Perform the action which is causing the unexpected behavior or error message
Once the problem is reproduced, click the Stop Capturing button (the red square icon)
Click the Export as HAR button (floppy disk icon) to save the file
Hope it helps.
Related
I can't publish my chrome extension because it says "You must provide a contact email before you can publish any item."
I entered my E-Mail Address but it still does not work. Does anyone know how to configure that?
I published extensions successfully in the past, but apparently there was a policy change.
Here is the error message:
And here the config i did:
They overhauled their dashboard and this was hella confusing for me.
You need to click the header, and then account, and then you can find the email address here:
I faced same issue but it works after re-login.
As aforementioned by Haru you'll need to re-login to fix it. To itemize, here is how you can fix it:
Head to your Google Chrome Developer Dashboard
On the top left, click on the collapsible menu (three bars icon)
Choose the second option: "account"
Under the heading "Profile" add your email.
On the top right, click on your profile picture.
A small screen will popup. Choose the option at the bottom: "logout"
Now when you login it will be working as expected.
I customized the Cases screen by adding a new button on the Activities tab's grid toolbar. I'm using PXRedirectRequiredException to try to open a new custom screen I created. This throws the insufficient rights message to my new screen's graph. In the Access Rights by Role and by Screen, I made sure that my new screen was granted permission to both Administrator and EMPLOYEE, but I still get this message and can't open the new screen. What am I missing?
This error could be caused by a missing site map definition.
Have you added your custom screen to the site map? Try to access it directly by entering the page ID in the URL.
Example: http://localhost/[InstanceName]/Main?ScreenId=AA101000
If you are redirected to the home (page 00000000), there is an error with the site map for this page.
Thanks to Fernando in the answer above, I opened the new screen by URL, which uncovered the real error. My screen's TypeName was wrong because I had renamed the class, and An ASP.NET error displayed this fact. Once I fixed the TypeName, the screen opened. The insufficient rights message was an incorrect error and a red herring.
Where:
In build -> Actions -> Upload content via Google Sheets
Problem: I have the trivia template selected. I've already created a sheet and uploaded and deployed my action. Now I figured out that one of my questions had a wrong answer. So I updated the sheet and then went back to the actions tab to upload content via google sheets
Then I clicked on UPDATE TEST and tested my app in the simulator. The changes were reflected.
Then I clicked on UPDATE PROD and I get the following message
On doing further investigation I found out that the GET request is returning a 403 error
and in the Network tab, this is the response I'm getting:
I'm not sure what is going on.
I have encountered the same situation.
However, there is a workaround or it must be the right action when upgrading your Q&A Sheet. It is to use "submit for production" in Deploy>Release sidebar. See [attached image].1
I also had the same problem. I think you have changed the Google Sheet's name and questions per page, so it gives an error. If you give the same name and questions per page it is taking i.e. updating.
I'm wanting to sign into Mural automatically, but their web design requires a keystroke, but I can't get my design to work. I have tried, both global send keys and send events. Furthermore, the click center input doesn't seems to register. :/ Any suggestions? The delay is implemented as a recommendation by another user:
If I understand correctly you are trying to sign into this page. I have succesfully written in its email textbox just recognizing the field with the application modeler (browser mode) and a Write stage.
As esqew suggested in the comments then when I tried to sign in there was an error saying "an email is required". The solution for me was to use Navigates, first with "Global Send Keys" action and then "Click Center" for the button.
If it is not that website and it's another one it might be helpful if you add a link to the website in your question.
There could be several reasons why your send keys or the click events are not working, in order to help you it would be necessary to see the configuration inside the stages in your object.
As clarified by jnch, the problem is resolved by using global send keys and then using another navigation stage with click center. I believe this fixes the problem since the website demands borderline human interaction.
I am using Stripe to carry out some test transactions on supposed customers from a CodeIgniter application.
For some reason, to re-create a Stripe > Plan with the same old id and name online or to re-enter the Stripe customer into the Stripe > Customers
through the API I have to clear the test data. When I clear the test data it clears the test data except the Logs.
Now what happens when I re-create a Stripe > Plan, it automatically gets the deleted customer from the Logs. As I don't need the old customer in the plan as I might have changed its credentials.
So how to delete/clear the Logs on Stripe in a test environment?
This is an older question, but a Google search brought me here, requiring an answer after my own trial and error (correct solution may have changed over time).
Login to the Stripe dashboard
Choose "Business Settings" on the bottom-left of the page.
Choose "Data" on the left menu.
Select the gray "Delete all test data..." button.
Select the red "Delete Now" button on the confirmation modal.
It may ask to confirm your password before proceeding.
As of May 2, 2020, this has moved again.
Log into the Stripe Dashboard
Go to the Developers tab in the left sidebar
Scroll to the bottom
Click "Delete all test data..."
As of Nov 21, 2019, the process is similar to Christopher Stevens answer, however things have moved around a little.
Login to the Stripe Dashboard
Click Settings in bottom left corner
Scroll to the Compliance and reporting section (at bottom of page)
Click the Data link
At bottom of page you should see after "Test data:" a button that says "Delete all test data..."
Stripe changes the UI often enough, that this answer will likely require ongoing maintenance.
Im not sure why but for me I had to go into "Developers" on the left hand menu. On the next screen at the very bottom there is a section to remove Test Data.
As of August 8, 2020:
Go to your account, toggle "viewing test data" to ensure it's enabled.
Click on "Developers" on the sidebar.
At the bottom there is a section for "Test data". Hit the "Delete all test data..." button.
Check your Account Setting (upper right corner) > data.
The last option says: "Test Data: Delete all test data..."
Got it from Robin Thebe on wpguru.com: "How to delete Stripe test data"
After trial and error I came to know that in the Stripe interface there is no way to get rid of the logs, maybe it is due to give security in the pro environment. However I found out that there is an option to just make another account under the same stripe-user-email. On the creation of the new account we actually get rid of the logs. And we can just simply delete the old account.
Note: Deletion of an account does not delete you from Stripe. Its just creation of an account with a different name. We can have many accounts with many names.
You can delete all the test data within the 'Developer' tab below: https://dashboard.stripe.com/developers