Issues with my MAC forced me to have to format and start fresh. I uploaded my project to GITHUB and downloaded it after installing NPM 6.9.0 & Node 12.6.0. Nothing works and i keep getting this gyp error:
gyp: Call to 'node findJavaHome.js' returned exit status 1 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:345:16)
gyp ERR! stack at ChildProcess.emit (events.js:203:13)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:272:12)
gyp ERR! System Darwin 18.6.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /Users/anonymous/Development/Mundo1.6/node_modules/java
gyp ERR! node -v v12.6.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! java#0.11.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the java#0.11.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
I'm not sure what to do at this point...I've tried all of the suggestions I've seen online:
sudo npm install --unsafe-perm
sudo node-gyp rebuild -g --unsafe-perm
sudo chmod 777
sudo node-gyp rebuild -g --unsafe-perm
sudo npm config set unsafe-perm=true
npm rebuild node-sass
Any help would be greatly appreciate at this point. Again, I had to format in order to upgrade my MAC os Mojave 10.14.5
I've never had to constantly use sudo with NPM in the past so I'm not sure what went wrong.
For me it was updating the node-sass version (I was getting this error while installing node package manager packages for Angular) from 4.9.3 to 4.13.1
Related
I'm trying to reprogram a dash button to send an SMS to a phone. The task I am trying to attempt is located here: https://github.com/sanzgiri/dash-sms. Below is a copy of the error message I've been getting. Any insight is much appreciated. I'm using Ubuntu version 16 in a virtual machine.
rebecca#rebecca-VirtualBox:~$ sudo npm install node-dash-button
> socketwatcher#0.3.0 install /home/rebecca/node_modules/socketwatcher
> node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node- gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Linux 4.4.0-21-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/rebecca/node_modules/socketwatcher
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Linux 4.4.0-21-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "node-dash-button"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! socketwatcher#0.3.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the socketwatcher#0.3.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the socketwatcher package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs socketwatcher
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls socketwatcher
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/rebecca/npm-debug.log
I believe the code is confugure to work with "node" instead of "nodejs".
You can setup a simlink or just run this command. It solved the issue for me.
sudo apt install nodejs-legacy
Had the same issue and nothing would work. Finally had to go to node 0.10.26 on the pi.
Used NVM instead of direct node install.
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.1/install.sh | bash
nvm install 0.10.26
I'm getting this error:
/bin/sh: pkg-config: command not found
gyp: Call to 'pkg-config libzmq --libs' returned exit status 127. while trying to load binding.gyp
I've tried upgrading nodejs to 5.1.0.
I've tried downgrading nodejs to 4.2.2.
I've tried completely removing nodejs manually then re-installing 4.2.2 and trying again.
I've tried the removal script here:
https://gist.github.com/brock/5b1b70590e1171c4ab54
Then re-installing each version and trying again.
I've tried downgrading to zeromq 4.0.7.
No luck.
Here's the complete error:
localhost:~ user$ npm install zmq
/
> zmq#2.14.0 install /Users/user/node_modules/zmq
> node-gyp rebuild
/bin/sh: pkg-config: command not found
gyp: Call to 'pkg-config libzmq --libs' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:355:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Darwin 13.4.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /Users/user/node_modules/zmq
gyp ERR! node -v v4.2.2
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Darwin 13.4.0
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "zmq"
npm ERR! node v4.2.2
npm ERR! npm v2.14.7
npm ERR! code ELIFECYCLE
npm ERR! zmq#2.14.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the zmq#2.14.0 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the zmq package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls zmq
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /Users/user/npm-debug.log
Here's what worked...
install zmq using brew : brew install zmq
export PKG_CONFIG_PATH=/usr/local/Cellar/zeromq/4.0.4/lib/pkgconfig/
sudo visudo
add the line Defaults env_keep += "PKG_CONFIG_PATH"
sudo npm install zmq
Here is how I fixed it:
Step 1:
brew install zmq
Step 2:
export PKG_CONFIG_PATH=/usr/local/Cellar/zeromq/4.2.5/lib/pkgconfig/
(Note: zeromq Version 4.2.5 in path above will need to be changed to whatever version you installed)
Step 3:
sudo visudo
and add
Defaults env_keep += "PKG_CONFIG_PATH"
Step 4:
In package.json > dependencies, add:
"zmq": "^2.15.3"
Step 5:
Run yarn or npm install
I am trying to install node_xslt module in node 0.12 but it is failing. I have python version 2.7 and node-gyp version 2.0.2.
Here is the error stack-
> node_xslt#0.1.9 preinstall /home/ritesh/Ritesh/projects/applane1/node_modules/node_xslt
> node-gyp rebuild
/bin/sh: 1: xml2-config: not found
gyp: Call to 'xml2-config --cflags' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:343:16)
gyp ERR! stack at ChildProcess.emit (events.js:110:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1074:12)
gyp ERR! System Linux 3.13.0-32-generic
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/ritesh/Ritesh/projects/applane1/node_modules/node_xslt
gyp ERR! node -v v0.12.4
gyp ERR! node-gyp -v v1.0.3
gyp ERR! not ok
npm ERR! Linux 3.13.0-32-generic
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "node_xslt"
npm ERR! node v0.12.4
npm ERR! npm v2.10.1
npm ERR! code ELIFECYCLE
npm ERR! node_xslt#0.1.9 preinstall: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the node_xslt#0.1.9 preinstall script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the node_xslt package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls node_xslt
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /node_modules/npm-debug.log
This error comes while installing other modules as well i.e. xslt4node.
Just had the same problem, though the question is 5+ years old, might be useful for somebody else. I solved my problem switching to a different version of node with nvm: nvm use 12 in my case.
Try installing compile tools
sudo apt-get install python3 g++ make python3-pip
Works for me
Try installing sudo apt-get install libxml2-dev
I am trying to install a printer module for node on a lubuntu system, but making the npm installation, I get this:
gyp: Call to 'cups-config --libs' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node-gyp/lib/configure.js:344:16)
gyp ERR! stack at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:797:12)
gyp ERR! System Linux 3.16.0-23-generic
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/puesto1/app/node_modules/printer
gyp ERR! node -v v0.10.25
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian
npm ERR! printer#0.1.1 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the printer#0.1.1 install script.
npm ERR! This is most likely a problem with the printer package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls printer
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 3.16.0-23-generic
npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! cwd /home/puesto1/app
npm ERR! node -v v0.10.25
npm ERR! npm -v 1.4.21
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/puesto1/app/npm-debug.log
npm ERR! not ok code 0
It is a recently installed lubuntu, and I don´t know what to do. Any suggestion to solve the problem?? Any other module to print??
Thank you.
I think node-gyp is not up to date in your system and also cups-config is not installed, try to re-install node-gyp using apt-get with this command : sudo apt-get install node-gyp and install cups-config using command : sudo apt-get install libcups2-dev
Running 'sudo npm install' on MAC, I got the error about node-gyp rebuild on the base64#2.1.0 install. Any way to resolve this problem? Please help.
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 69
gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:810:12)
gyp ERR! System Darwin 13.4.0
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /Users/jepeng/Documents/huron/wx2-admin-web-client/node_modules/base64
gyp ERR! node -v v0.10.32
gyp ERR! node-gyp -v v1.0.1
gyp ERR! not ok
npm ERR! base64#2.1.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the base64#2.1.0 install script.
npm ERR! This is most likely a problem with the base64 package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls base64
npm ERR! There is likely additional logging output above.
npm ERR! System Darwin 13.4.0
npm ERR! command "node" "/usr/local/bin/npm" "install"
npm ERR! cwd /Users/jepeng/Documents/huron/wx2-admin-web-client
npm ERR! node -v v0.10.32
npm ERR! npm -v 1.4.28
npm ERR! code ELIFECYCLE
npm ERR! not ok code 0
I have resolved this issue by using older version of node v0.10.40
I was facing similar issue.
Followed the following steps to fix it on MacOS highSierra 10.13:
Downloaded command line tools (MacOS 10.13) for xcode and installed it. Download it from "https://developer.apple.com/download/more/"
Installed xcode 10.0 from the app store. Opened xcode and went through the regular configuration xcode does in the initial start up.
After this it started giving "xcode-select" path issue as stated in the description above. On running command "xcode-select --print-path" it was showing path as '/ Library/Developer/CommandLineTools', so i went ahead and tried "xcode-select --reset" after which the path changed to "/Applications/Xcode.app/Contents/Developer". Immediately after it the build started working without any issues.