i'm trying to download zip file from my application hosted on IIS, but unfortunately the download is not being completed, it's stuck on 99%
i tried to change the MYME-Type to octet-stream, without luck. also i tired to manage the MYME-Type from the web.config with same situation.
NOTES: 1- I'm able to download RAR files without any issue.
2- I'm using IIS 7.5 under windows server 2012
According to your captured image, I guess you used chrome to download the file. There are two reason which will cause this issue.
One is your computer has installed the anti-virus checking for the downloaded files. I suggest you could try to disable the related setting and try again.
Besides, the chrome has contained the build-in scanning/checking the files which is used to checking the download files. I suggest you could try to start chrome with this switch:
--safebrowsing-disable-download-protection
Related
I'm trying to use the Joomla ARS. I've set it up and it seems to work for everything except the download of zip files.
I've set it up so that you can see the file in the front end but when you click on it a:
The requested document was not found on this server
error is thrown.
I've tried directly linking the file and it downloads fine. I've also set up an article to check that it'll download and again it works fine. So I don't think there are any permission issues since the zip file can be downloaded just not by using ARS.
Finally I've also tried different file types in ARS and if I swap the zip file for an xml file or a pdf file they both download fine.
Any ideas about how to debug?
I figured it out :)
The site had add a suffix to url switched on which was stopping it getting the correct route. Changed that and it worked as expected.
maybe I am blind or I don't understand something right. I have created some HelloWorld-App and now I would like to test in on my device directly. (not via Visual Studios' Remote Tools)
So created my app package in VS but selected "No" for "Uploading to Windows Store" since I want to try it out localy.
The build an verification is successful and all but at the end I got a folder ("HelloWorld_1.0.1.0_Test") in the "AppPackages"-Folder. There are a couple of files. .appxbundle, .appxsym (for each architectiure one)
But if I want to install an app via the device manager it requires an .appx file. Where do I get this one?
I googled a lot, but I only found the descriptions for using the Windows Store.
Isn't it possible without it or am I missing something?
Kind Regards
Pavel
I don't know which device manager you install it through, but an appxbundle should be the fine. It's a ZIP file which includes several appx files (for several display scales, languages, ...).
But generally, inside the AppPackages folder there should be a folder like "AppName_1.0.0.0_Test". VS creates not only the appxbundle there, but also a Powershell script Add-AppDevPackage.ps1. Run it as admin and it installs the app if sideloading is enabled. This should be the easiest option to test apps on other machines without Store submissions.
I am trying to install a package (oForms) with a new Orchard 1.8 installation, but receiving the following error:
"Package installation failed: There was an error installing the requested package. This can happen if the server does not have write access to the '~/Modules' or '~/Themes' folder of the web site. If the site is running in shared hosted environement, adding write access to these folders sometimes needs to be done manually through the Hoster control panel. Once Themes and Modules have been installed, it is recommended to remove write access to these folders."
This seemed rather straightforward, however my host has confirmed permissions are fine (and even added Everyone/Full Control to the folder), so I'm lost and appears to be happening with all modules from the Gallery, not just oForms. I changed the Config/log4net.config file to log everything, and I don't see anything specific in there except where it logs the same message above. Nothing outside of that stands out at all.
Is there a way to see why this is failing? Or, if not, is there a way to get the module and install it manually? I tried to download from the gallery, but it's just a NuGet package so I'm not sure how to take that and grab the raw module files.
You can use a program like 7zip to unzip the nuget package, then copy in the module manually yourself.
As for the permissions, when adding a new permission to the folder use:
IIS AppPool\name of your application pool
I also had this exact error message when installing modules from the gallery, and it took me a while to figure out what was happening. I made new installations, copying over files one-by-one, and eventually found the culprit. For my case anyways...
For me, it was all due to a bad formatting in my custom Theme. Specifically the Theme.txt file. The line where is says Version:, I had it formatted without any "."
Good:
Version: 1.0
BAD:
Version: 1
Yes, doing this simple mistake prevented me from installing Modules.
I am tearing my hair out with a file weird file upload issue that I have never run into before. For some reason I’m unable to upload images via the file manager (both in the file manager itself and if I upload with a custom field using the “file” fieldtype). Strangely, if I add files directly to any of the file upload directories, and sync the files, everything works fine.
After selecting the file and hitting “upload file” (see 01_choose_file.jpg) the modal window displays the CP homepage in an iframe (see 02_upload_progress.jpg).
Has anyone else seen this? Does anyone know how I can start troubleshooting this?
Background Info:
I’m running EECMS v2.5.2 - Build Date: 20120606 in MAMP (only 2 out of 15 sites I have set up locally are not working)
I have tried uploading images/files using the latest versions of Chrome, Chrome Canary, Safari, and Firefox (OS X 10.7.5)
This issue is showing up on the two latest sites I’ve started dev’ing locally on, no other site (locally or otherwise)
Things I’ve done:
Checked Apache/PHP error logs; they don’t show anything
Confirmed file upload paths and file upload directory settings are correct – I can sync files that i manually move into the various file upload directories
Permissions are fine; image manipulations and thumbnail creation work fine if I manually add files to the upload directories
Tested various other 2.5.2 installs I dev on locally and they work fine (settings on these two new sites are identical to sites that work)
Only a handful of native add-ons are enabled
“Apply XSS Filtering to uploaded files?” setting Yes or No does not make a difference
Huge thanks for any help!
I can't post images so here are links to the images:
01_choose_file.jpg: http://expressionengine.com/?ACT=51&fid=105&aid=16264_Jiof3p0V1gfEEFrpC55G&board_id=5
02_upload_progress.jpg: http://expressionengine.com/?ACT=51&fid=105&aid=16265_mjGH02xK2fIFZJI6kruP&board_id=5
I have sorted this out. I went back through to make sure I disabled all third party add-ons and I had forgotten to uninstall the "Quickee" extension http://devot-ee.com/add-ons/quickee. For now that seems to be the culprit.
I've submitted the bug to Matt (the developer) and it should be patched up soon.
The ExpressionEngine filemanager sends out a AJAX POST request to the following URL:
http://YOUR_ADMIN_CP_URL?S=0&D=cp&C=content_files_modal&M=upload_file
Have you tried loading that URL yourself? You should get a page like this
But maybe EE is trying to POST to a different URL. You can find it by uploading a large file and while it's uploading using Firebug and in the Network tab at the bottom of the list you will find the URL EE is posting to
I'm using multiple computers for development and I want to be able to store my files in my dropbox folder. I went to change the physical path in IIS from c:\inetpup\wwwroot to the dropbox folder but I get this error:
The requested page cannot be accessed
because the related configuration data
for the page is invalid.
I couldn't find the config file so I was wondering if anyone had done this before or whether there a better way to sync everything nicely across several PCs?
I tried it (IIS 7.5, Win 7) and it should work just fine to let your physical path of your web look at your dropfox folder. I would guess your web.config file generally contains malformed XML (see KB942055).
I'd suggest, try to map it to an empty folder just with an index.html file and see if this error still occurs.
As a workaround, I guess you can put Dropbox in your wwwroot folder and set up a virtual directory that points to Dropbox. However, there are some security issues that may hinder you from doing so. I come across a nice tutorial on how to set up Dropbox to IIS as FTP Publishing. Hope it helps.
Hodgin's guide on using Dropbox as FTP publishing.