ChromeDriver will not run, saying that the current address is already in use. Whenever I have used lsof I have found nothing using port 1915, which is what ChromeDriver is wanting to use.
I've looked everywhere to find a solution for this but they all just say to kill whatever is using the port but I can't find any.
I also found a similar question on here at 'Chromedriver cannot be started due to address already in use',
but that question shows their error is saying an IPv4 port is not available whilst mine says IPv6.
Starting ChromeDriver 73.0.3683.68 (47787ec04b6e38e22703e856e101e840b65afe72) on port 9515
Only local connections are allowed.
Please protect ports used by ChromeDriver and related test frameworks to prevent access by malicious code.
[1553613641.983][SEVERE]: bind() failed: Address already in use (98)
IPv6 port not available. Exiting...
Any help on this would be greatly appreciated. This issue is critical for one of my projects which worked fine on windows, but I just recently moved to linux due to my windows getting corrupted and not wanting to have to deal with installing windows again, plus wanting a change-up in my day to day workings on the computer. Because of this, any tips given would be great if explained like I'm 5.
Thanks in advance.
Alternatively, if this issue is because you have another chromedriver process in the background, you can just run killall chromedriver.
fuser -k 9515/tcp
This one worked fine thanks for #Svilen
To identify the process id for ChromeDriver use ps -fA | grep chromedriver, Then kill the column two id number.
You need to kill chromedriver to get this working
vikaspiprade#AUMEL-P7750-VP:~/openfield-cloud/nightwatch$ npx nightwatch --test ./tests/widgets/banner.test.js --testcase "Hide Row Label in Banner Widget"
Error: ChromeDriver process exited with code: 1
[1663729485.869][SEVERE]: bind() failed: Address already in use (98)
at ChildProcess.emit (node:events:513:28)
at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
[1663729485.869][SEVERE]: bind() failed: Address already in use (98)
vikaspiprade#AUMEL-P7750-VP:~/openfield-cloud/nightwatch$ ps
PID TTY TIME CMD
14354 pts/7 00:00:00 chromedriver
14416 pts/7 00:00:01 chrome <defunct>
14854 pts/7 00:00:00 npm exec serve
14878 pts/7 00:00:00 sh
14879 pts/7 00:00:00 node
15134 pts/7 00:00:00 ps
23260 pts/7 00:00:00 bash
vikaspiprade#AUMEL-P7750-VP:~/openfield-cloud/nightwatch$ kill -9 14354
vikaspiprade#AUMEL-P7750-VP:~/openfield-cloud/nightwatch$
Related
I upgraded my Linux kernel and dovecot failed to start with the following error messages:
Error: service(managesieve-login): listen(*, 4190) failed: Address already in use
Error: service(pop3-login): listen(*, 110) failed: Address already in use
Error: service(pop3-login): listen(*, 995) failed: Address already in use
Error: service(imap-login): listen(*, 143) failed: Address already in use
Error: service(imap-login): listen(*, 993) failed: Address already in use
Fatal: Failed to start listeners
Strangely enough, I couldn't find any process bounded to those port numbers. All commands below return nothing.
# netstat -tulpn | grep 110
# ss -tulpn |grep 110
# fuser 110/tcp
# lsof -i :110
I also tried to change the listen setting to my specific IP address and it still failed the same way.
Any idea how I can solve this problem? Here's my version info:
# uname -a
Linux ip-172-31-26-222 4.14.177-107.254.amzn1.x86_64 #1 SMP Thu May 7 18:30:14 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# dovecot --version
2.2.36 (1f10bfa63)
Hi it looks like you are using AWS as I am. I recently updated via Yum as well. I noticed that a new package named 'portreserve' was also installed. I killed that process, left the /etc/dovecot/dovecot.conf as it was before and then started Dovecot successfully. I was also immediately able to reconnect my mail clients connection. I hope that helps you.
I also restarted the portreserve program since it seems useful to limit port access.
I'm trying to start httpd on my web server but when I try to start it, I was getting "httpd (pd 10989) already running", so I killed the process in hopes httpd might start up. No luck.
Now I am getting:
Starting HTTPD
(98)Address already in use: AH00072: make_sock: could not bind to
address [::]:9011
(98)Address already in use: AH00072: make_sock: could not bind to
address 0.0.0.0:9011
no listening sockets available, shutting down
AH00015: Unable to open logs
After I killed the process using:
kill -9 10989
Is there a way to restore this process?
Thanks for any help in advance!
The jetty on our linux server is not installed as a service as we have multiple jetty servers on different ports. And we use command./jetty.sh stop and ./jetty.sh start to stop and start jetty.
However, when I add sudo to the command, the server never stop/start successfully. When I run sudo ./jetty.sh stop, it shows
Stopping Jetty: start-stop-daemon: warning: failed to kill 18772: No such process
1 pids were not killed
No process in pidfile '/var/run/jetty.pid' found running; none killed.
and the server was not stopped.
When I run sudo ./jetty.sh start, it shows
Starting Jetty: FAILED Tue Apr 23 23:07:15 CST 2019
How could this happen? From my understanding. Using sudo gives you more power and privilege to run commands. If you can successfully execute without sudo, then the command should never fail with sudo, since it only grants superuser privilege.
As a user it uses $HOME.
As root it uses system paths.
The error you got ..
Stopping Jetty: start-stop-daemon: warning: failed to kill 18772: No such process
1 pids were not killed
No process in pidfile '/var/run/jetty.pid' found running; none killed.
... means that there was a bad pid file sitting around for a process that no longer exists.
Short answer, the processing is different if you are root (a service) vs a user (just an application).
I have two problems running freeswitch from systemd :
EDIT 2 - I have moved the slow start up question to here (Freeswitch pauses on check_ip at boot on centos 7.1) as although they may be related it's probably good as a standalone.
EDIT - I have noticed something else. Look at these next lines captured from the terminal output when running it from there. The gap is 4 minutes but it has been around 10 minutes before. I noticed it because I was trying to find out why port 8021 was taking several minutes to accept the fs_cli connection. Why does this happen? Never happened to me before and I've installed loads of FS boxes. This does the same thing on both 1.7 & todays 1.6.
2015-10-23 12:57:35.280984 [DEBUG] switch_scheduler.c:249 Added task 1 heartbeat (core) to run at 1445601455
2015-10-23 12:57:35.281046 [DEBUG] switch_scheduler.c:249 Added task 2 check_ip (core) to run at 1445601455
2015-10-23 13:01:31.100892 [NOTICE] switch_core.c:1386 Created ip list rfc6598.auto default (deny)
I sometimes get double processes started. Here is my status line after such an occurrence :
# systemctl status freeswitch -l
freeswitch.service - freeswitch
Loaded: loaded (/etc/systemd/system/multi-user.target.wants/freeswitch.service)
Active: activating (start) since Fri 2015-10-23 01:31:53 BST; 18s ago
Main PID: 2571 (code=exited, status=0/SUCCESS); : 2742 (freeswitch)
CGroup: /system.slice/freeswitch.service
├─usr/bin/freeswitch -ncwait -core -db /dev/shm -log /usr/local/freeswitch/log -conf /usr/local/freeswitch/conf -run /usr/local/freeswitch/run
└─usr/bin/freeswitch -ncwait -core -db /dev/shm -log /usr/local/freeswitch/log -conf /usr/local/freeswitch/conf -run /usr/local/freeswitch/run
Oct 23 01:31:53 fswitch-1 systemd[1]: Starting freeswitch...
Oct 23 01:31:53 fswitch-1 freeswitch[2742]: 2743 Backgrounding.
and there are two processes running.
The PID file is sometimes not written fast enough for the systemd process to pick it up, but by the time I see this (no matter how fast I run the command) it's always there by the time I do :
Oct 23 02:00:26 arribacom-sbc-1 systemd[1]: PID file
/usr/local/freeswitch/run/freeswitch.pid not readable (yet?) after
start.
Now, in (2) everything seems to work ok, and I can shut down the freeswitch process using
systemctl stop freeswitch
without any issues, but in (1) it just doesn't seem to do anything.
I'm wondering if the two are related, and that freeswitch is reporting back to systemd that the program is running before it actually is. Then systemd is either starting up another process or (sometimes) not.
Can anyone offer any pointers? I have tried to mail the freeswitch users list but despite being registered I simply cannot get any emails to appear on the list (but that's another problem).
* Update *
If I remove the -ncwait it seems to improve the double process starting but I still get the can't read PID warning, so I'm still sure there's an issue present, possibly around timing(?).
I'm on Centos 7.1, & my freeswitch version is
FreeSWITCH Version 1.7.0+git~20151021T165609Z~9fee9bc613~64bit (git
9fee9bc 2015-10-21 16:56:09Z 64bit)
and here's my freeswitch.service file (some things have been commented out until I understand what they are doing and any side effects they may have) :
[Unit]
Description=freeswitch
After=syslog.target network.target
#
[Service]
Type=forking
PIDFile=/usr/local/freeswitch/run/freeswitch.pid
PermissionsStartOnly=true
ExecStart=/usr/bin/freeswitch -nc -core -db /dev/shm -log /usr/local/freeswitch/log -conf /u
ExecReload=/usr/bin/kill -HUP $MAINPID
#ExecStop=/usr/bin/freeswitch -stop
TimeoutSec=120s
#
WorkingDirectory=/usr/bin
User=freeswitch
Group=freeswitch
LimitCORE=infinity
LimitNOFILE=999999
LimitNPROC=60000
LimitSTACK=245760
LimitRTPRIO=infinity
LimitRTTIME=7000000
#IOSchedulingClass=realtime
#IOSchedulingPriority=2
#CPUSchedulingPolicy=rr
#CPUSchedulingPriority=89
#UMask=0007
#
[Install]
WantedBy=multi-user.target
In the current master branch, take the two files from debian/ directory:
freeswitch-systemd.freeswitch.service -- should go as /lib/systemd/system/freeswitch.service
freeswitch-systemd.freeswitch.tmpfile -- should go as /usr/lib/tmpfiles.d/freeswitch.conf
You probably need to adapt the paths, or build FreeSWITCH to use standard Debian paths.
I lunched a simulator program which developed on C++ in my Ubuntu 11 when i want kill this process from process list of Linux and want to run it again, i faced to this error:
Error initializing sockets: port=6000. Address already in use
I used lsof command to find PID of process:
saman#jack:~$ lsof -i:6000
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
rcssserve 8764 saman 3u IPv4 81762 0t0 UDP *:x11
after that i tried to kill PID of 8764. but still it has error.
How can i fix it?
I think the problem you are having is that the socket if it is not shutdown correctly then it is still reserved and waiting for a timeout to be closed by the kernel.
Try doing a netstat -nutap and see if there's a line like this:
tcp 0 0 AAA.AAA.AAA.AAA:6000 XXX.XXX.XXX.XXX:YYYY TIME_WAIT -
if that's the case you just have to wait until the kernel drops it (30 secs approx) until you can open the socket at 6000 without conflict
It would seem that port 6000 is used by the X windowing system (the GUI part of linux) and is probably just restarted when you kill the process... either you'll need run the simulation without X-windows running, or you tweak the code to use a different port..