p2p_find
OK
<3>CTRL-EVENT-SCAN-STARTED
-That's it, its not scanning recursively
wpa_supplicant v2.7
.conf(etc/wpa_supplicant/.conf)file contains the following...
ctrl_interface=DIR=/var/run/wpa_supplicant
config_methods=pbc
update_config=1
ap_scan=1
device_name=MY_p2p
device_type=1-0050F204-1
p2p_listen_reg_class=81
p2p_listen_channel=1
Just want that to scan recursively and work normally as it does.
TIA
i know it is a bad practice to answer you own post:/
the issue was with the driver which was installed on the PC, it was not the correct driver for the PC. So i just installed the correct driver in my case and now the p2p_find and all commands in wpa is working fine..
Related
I am not sure if this is a right place to ask this type of questions. I am a python beginner or programmer overall at this point. I am using Spyder to use python 3.6 (via Anaconda). I wrote a code that works fine when I run it in the current Ipython console. But I really need to run it in an external system terminal. In order to do so, I chose the following path: Run-> configuration per file -> execute in an external system terminal. That has been working fine. But now it refuses to work!
I validated that there is nothing wrong with my code by running something simple and saw that running via external system terminal does not work.
So far I deleted Anaconda and re-installed it. Could someone suggest what I should be looking for to diagnose the problem and fix it?
Thanks!
I had the same problem and noticed that unless the Working directory settings is set to "The directory of the file being executed", it won't work.
You can change it in "Run" > "Run configuration per file".
I am a linux noob trying to setup openbox on an arch linux base. I am trying to get it as lightweight as possible in terms of resources used.
My final plan is to use openbox, with tint1 and conky.
however I am having an issue getting openbox to start. I have followed numerous guides and am struggling to figure out the problem.
I have so far installed the following (and done this config)
openbox (installed default option with the extras asked for)
create ~/.conifg/openbox
copied, rc.xml, menu.xml, autostart, environment to the above location
pyxdg
xorg-xinit
xorg-server
this didn't work so I the installed the full
xorg
still nothing, although when I try to run startx the screen goes black for a second as though it is trying, but then goes back to text mode saying it has failed.
I have had a look at the attached log file, but I don't know enough to be able to interpret it properly.
log file: https://www.dropbox.com/s/r76fowkooi822y9/Xorg.log?dl=0
I would appreciate any assistance.
Thanks
Steve
still nothing, although when I try to run startx the screen goes black for a second as though it is trying, but then goes back to text mode saying it has failed.
what is it saying?
There is only one error: (EE) open /dev/fb0: Permission denied, try starting your environment with the same configuration as root - just to see if it works. Maybe its a problem related to rootless X.
Have you configured/checked your installation (xserver, graphics driver, xinit config) using the following guides?
https://wiki.archlinux.org/index.php/xorg
https://wiki.archlinux.org/index.php/xinitrc
Try to start a minimal X (As described in the xinitrc article) to see if your xserver and graphics driver is working correctly.
For the better part of a day now I've been trying to get node.js to work on my computer.
Even though I get no errors during installation, whenever i try to run node or npm from the command line I only get the error "Evented I/O for V8 JavaScript has stopped working" and then nothing happens.
I really have no clue why it isn't working and what I have to do to get it to work! Has anyone else ever had the same problem and were you able to fix it somehow?
It seems the problem was with ansicon which I installed together with cucumber.
I was able to fix the problem by running "ansicon -u" in my x64 folder
I am from Mac background trying my hand at installing perforce client visual(P4V) on my linux box.For this I download the correct version here and untar the files.
Then I cd to the directory
~/Desktop/p4v-2012-blah-blah/bin
I also say
chmod +x p4*
After this i try running p4v (by double clicking) but I dont see anything .The file type is shown as a "text executable" but i dont know why it is not running.
On mac i had done the same thing -just clicked on p4v and the client would show up(where I filled the server address and everything )But not sure what is going wrong here.Can someone give me directions?
FWIW i did check out this link
and I do see the desktop (so GNOME is probably installed ?) .Hence p4v should be able to run.
I know we don't like link-based answers, but there is a rather complete walk-through here: http://www.perforce.com/documentation/tenminute-test-drive-linuxunix
Probably should be on Super User though.
You may have a 64bit Linux and tried to install a x86 P4V or vice versa, which is why the command doesn't run. Check that the OS and app types match.
All of the sudden svn stopped working in cygwin installation on windows xp. when I execute svn binary, nothing happens, svn process does not even show up in the Task Manager. I've reinstalled svn but it did not help (the last resort would be to uninstall cygwin itself). Everything else in cygwin works fine: awk,python,sed,more,less,tail and etc.
here is what is happening ...
mt#s022 ~
$ which svn
/usr/bin/svn
mt#s022 ~
$ svn --version
mt#s022 ~
$ svn status
mt#s022 ~
$ svn info
mt#s022 ~
$
Same problem as well.
No solution, but here's an interesting thing: For me, "curl" and "wget" are also broken in exactly the same way. This makes me wonder if it is one of the underlying networking libraries (libcurl, or similar) that is at the root of the problem (total guess).
EDIT: I have solved this problem. The problem turned out to be what seems to have been a "bad" version of openssl. I used the Cygwin setup program to "Reinstall" OpenSSL. The version number in setup is now "0.9.8n" which seems to have replaced "0.9.8", which I suspect was a bad version that was temporarily distributed, so if you were unlucky enough to update at the wrong time then this is what you got. The new version doesn't seem to be installed automatically just by updating normally. I'm guessing 0.9.8 is seen as the same version as 0.9.8n.
In case this doesn't solve it for others: the key insight was gained by launching svn.exe from Windows Explorer. While it exits silently when run from the bash command line, when run from Windows Explorer it pops up a window complaining: "the procedure entry point pqueue_size could not be located in the dynamic link library cygcrypto-0.9.8.dll". This allowed me to identify OpenSSL as the culprit. The same might be possible for other problems that manifest as commands silently exiting when run from the bash terminal.
This is what I did:
net stop sshd (this is optional)
remove /usr/bin/cygwin1.dll
remove /usr/bin/cygcrypto-0.9.8.dll
run cygwin-setup
reinstall cygwin-base
Hope this helps.
Ran into this problem. It seemed to have started when I added one small package and left everything else as keep. Solution that worked: remove cygwin1.dll, run cygwin's setup.exe, keep everything except base->cygwin. Updating that updated cygwin1.dll, and all was fine again.
I had same issue.
I followed the suggestion above and tried to launch svn from the windows explorer and it turned out that I had a problem with cygwin1.dll itself.
Doing a reinstall of the cygwin package solved my problem
I had the same problem and upgrading/reinstalling the cygwin base classes didn't help me neither...
Until I disabled the "CYGWIN sshd" service.
Therefore, if you run the Cygwin sshd process, stop it first, before upgrading Cygwin.
Good luck!