How to set a global environment variable in a bash script?
If I do stuff like
#!/bin/bash
FOO=bar
...or
#!/bin/bash
export FOO=bar
...the vars seem to stay in the local context, whereas I'd like to keep using them after the script has finished executing.
Run your script with .
. myscript.sh
This will run the script in the current shell environment.
export governs which variables will be available to new processes, so if you say
FOO=1
export BAR=2
./runScript.sh
then $BAR will be available in the environment of runScript.sh, but $FOO will not.
When you run a shell script, it's done in a sub-shell so it cannot affect the parent shell's environment. You want to source the script by doing:
. ./setfoo.sh
This executes it in the context of the current shell, not as a sub shell.
From the bash man page:
. filename [arguments]
source filename [arguments]
Read and execute commands from filename in the current shell
environment and return the exit status of the last command executed
from filename.
If filename does not contain a slash, file names in PATH are used to
find the directory containing filename.
The file searched for in PATH need not be executable. When bash is not
in POSIX mode, the current directory is searched if no file is found
in PATH.
If the sourcepath option to the shopt builtin command is turned off,
the PATH is not searched.
If any arguments are supplied, they become the positional parameters
when filename is executed.
Otherwise the positional parameters are unchanged. The return status
is the status of the last command exited within the script (0 if no
commands are executed), and false if filename is not found or cannot
be read.
source myscript.sh is also feasible.
Description for linux command source:
source is a Unix command that evaluates the file following the command,
as a list of commands, executed in the current context
#!/bin/bash
export FOO=bar
or
#!/bin/bash
FOO=bar
export FOO
man export:
The shell shall give the export attribute to the variables corresponding to the specified names, which shall cause them to be in the environment of subsequently executed commands. If the name of a variable is followed by = word, then the value of that variable shall be set to word.
A common design is to have your script output a result, and require the cooperation of the caller. Then you can say, for example,
eval "$(yourscript)"
or perhaps less dangerously
cd "$(yourscript)"
This extends to tools in other languages besides shell script.
In your shell script, write the variables to another file like below and source these files in your ~/.bashrc or ~/.zshrc
echo "export FOO=bar" >> environment.sh
In your ~/.bashrc or ~/.zshrc, source it like below:
source Path-to-file/environment.sh
You can then access it globally.
FOO=bar
export FOO
env and start.env that should run in any shell.
It actually does except for KORN where env variable setting is not behaves the way I would expect. So look at example.
file set.env :
#!/bin/bash
export MY_VAR="home" || setenv MY_VAR "home"
file start.sh :
#!/bin/bash
command . ./set.env || source set.env
echo "$MY_VAR"
i can see the print of variable.
but if try to echo it in terminal under ksh, it turned to be not defined.
ksh$ start.sh
home
ksh$ echo $MY_VAR
ksh$
I would expect to see $MY_VAR in my session... any ideas ?
//run under red hat
When you run start.sh, you're executing it as a subcommand, not sourcing it. Consequently, changes it makes to environment variables are scoped to that process and its children; once the process exits, the environment variables it sets die with it.
To portably source the script, executing it in your current shell and thus setting environment variables within that shell, run:
# this works on any POSIX shell, including ksh (and bastardizations such as mksh)
. start.sh
...or, less portably:
# this is a bashism
source start.sh
BTW, as a practice, command . ./set.env is... odd. command prevents execution of shell functions, but any environment where a function named . is defined is arguably a buggy environment. Consider . start.sh alone.
This question already has answers here:
Can I export a variable to the environment from a Bash script without sourcing it?
(13 answers)
Closed 3 years ago.
The community reviewed whether to reopen this question last year and left it closed:
Original close reason(s) were not resolved
I'm trying to write a shell script that, when run, will set some environment variables that will stay set in the caller's shell.
setenv FOO foo
in csh/tcsh, or
export FOO=foo
in sh/bash only set it during the script's execution.
I already know that
source myscript
will run the commands of the script rather than launching a new shell, and that can result in setting the "caller's" environment.
But here's the rub:
I want this script to be callable from either bash or csh. In other words, I want users of either shell to be able to run my script and have their shell's environment changed. So 'source' won't work for me, since a user running csh can't source a bash script, and a user running bash can't source a csh script.
Is there any reasonable solution that doesn't involve having to write and maintain TWO versions on the script?
Use the "dot space script" calling syntax. For example, here's how to do it using the full path to a script:
. /path/to/set_env_vars.sh
And here's how to do it if you're in the same directory as the script:
. set_env_vars.sh
These execute the script under the current shell instead of loading another one (which is what would happen if you did ./set_env_vars.sh). Because it runs in the same shell, the environmental variables you set will be available when it exits.
This is the same thing as calling source set_env_vars.sh, but it's shorter to type and might work in some places where source doesn't.
Your shell process has a copy of the parent's environment and no access to the parent process's environment whatsoever. When your shell process terminates any changes you've made to its environment are lost. Sourcing a script file is the most commonly used method for configuring a shell environment, you may just want to bite the bullet and maintain one for each of the two flavors of shell.
You're not going to be able to modify the caller's shell because it's in a different process context. When child processes inherit your shell's variables, they're
inheriting copies themselves.
One thing you can do is to write a script that emits the correct commands for tcsh
or sh based how it's invoked. If you're script is "setit" then do:
ln -s setit setit-sh
and
ln -s setit setit-csh
Now either directly or in an alias, you do this from sh
eval `setit-sh`
or this from csh
eval `setit-csh`
setit uses $0 to determine its output style.
This is reminescent of how people use to get the TERM environment variable set.
The advantage here is that setit is just written in whichever shell you like as in:
#!/bin/bash
arg0=$0
arg0=${arg0##*/}
for nv in \
NAME1=VALUE1 \
NAME2=VALUE2
do
if [ x$arg0 = xsetit-sh ]; then
echo 'export '$nv' ;'
elif [ x$arg0 = xsetit-csh ]; then
echo 'setenv '${nv%%=*}' '${nv##*=}' ;'
fi
done
with the symbolic links given above, and the eval of the backquoted expression, this has the desired result.
To simplify invocation for csh, tcsh, or similar shells:
alias dosetit 'eval `setit-csh`'
or for sh, bash, and the like:
alias dosetit='eval `setit-sh`'
One nice thing about this is that you only have to maintain the list in one place.
In theory you could even stick the list in a file and put cat nvpairfilename between "in" and "do".
This is pretty much how login shell terminal settings used to be done: a script would output statments to be executed in the login shell. An alias would generally be used to make invocation simple, as in "tset vt100". As mentioned in another answer, there is also similar functionality in the INN UseNet news server.
In my .bash_profile I have :
# No Proxy
function noproxy
{
/usr/local/sbin/noproxy #turn off proxy server
unset http_proxy HTTP_PROXY https_proxy HTTPs_PROXY
}
# Proxy
function setproxy
{
sh /usr/local/sbin/proxyon #turn on proxy server
http_proxy=http://127.0.0.1:8118/
HTTP_PROXY=$http_proxy
https_proxy=$http_proxy
HTTPS_PROXY=$https_proxy
export http_proxy https_proxy HTTP_PROXY HTTPS_PROXY
}
So when I want to disable the proxy,
the function(s) run in the login shell and sets the variables
as expected and wanted.
It's "kind of" possible through using gdb and setenv(3), although I have a hard time recommending actually doing this. (Additionally, i.e. the most recent ubuntu won't actually let you do this without telling the kernel to be more permissive about ptrace, and the same may go for other distros as well).
$ cat setfoo
#! /bin/bash
gdb /proc/${PPID}/exe ${PPID} <<END >/dev/null
call setenv("foo", "bar", 0)
END
$ echo $foo
$ ./setfoo
$ echo $foo
bar
This works — it isn't what I'd use, but it 'works'. Let's create a script teredo to set the environment variable TEREDO_WORMS:
#!/bin/ksh
export TEREDO_WORMS=ukelele
exec $SHELL -i
It will be interpreted by the Korn shell, exports the environment variable, and then replaces itself with a new interactive shell.
Before running this script, we have SHELL set in the environment to the C shell, and the environment variable TEREDO_WORMS is not set:
% env | grep SHELL
SHELL=/bin/csh
% env | grep TEREDO
%
When the script is run, you are in a new shell, another interactive C shell, but the environment variable is set:
% teredo
% env | grep TEREDO
TEREDO_WORMS=ukelele
%
When you exit from this shell, the original shell takes over:
% exit
% env | grep TEREDO
%
The environment variable is not set in the original shell's environment. If you use exec teredo to run the command, then the original interactive shell is replaced by the Korn shell that sets the environment, and then that in turn is replaced by a new interactive C shell:
% exec teredo
% env | grep TEREDO
TEREDO_WORMS=ukelele
%
If you type exit (or Control-D), then your shell exits, probably logging you out of that window, or taking you back to the previous level of shell from where the experiments started.
The same mechanism works for Bash or Korn shell. You may find that the prompt after the exit commands appears in funny places.
Note the discussion in the comments. This is not a solution I would recommend, but it does achieve the stated purpose of a single script to set the environment that works with all shells (that accept the -i option to make an interactive shell). You could also add "$#" after the option to relay any other arguments, which might then make the shell usable as a general 'set environment and execute command' tool. You might want to omit the -i if there are other arguments, leading to:
#!/bin/ksh
export TEREDO_WORMS=ukelele
exec $SHELL "${#-'-i'}"
The "${#-'-i'}" bit means 'if the argument list contains at least one argument, use the original argument list; otherwise, substitute -i for the non-existent arguments'.
You should use modules, see http://modules.sourceforge.net/
EDIT: The modules package has not been updated since 2012 but still works ok for the basics. All the new features, bells and whistles happen in lmod this day (which I like it more): https://www.tacc.utexas.edu/research-development/tacc-projects/lmod
Another workaround that I don't see mentioned is to write the variable value to a file.
I ran into a very similar issue where I wanted to be able to run the last set test (instead of all my tests). My first plan was to write one command for setting the env variable TESTCASE, and then have another command that would use this to run the test. Needless to say that I had the same exact issue as you did.
But then I came up with this simple hack:
First command ( testset ):
#!/bin/bash
if [ $# -eq 1 ]
then
echo $1 > ~/.TESTCASE
echo "TESTCASE has been set to: $1"
else
echo "Come again?"
fi
Second command (testrun ):
#!/bin/bash
TESTCASE=$(cat ~/.TESTCASE)
drush test-run $TESTCASE
You can instruct the child process to print its environment variables (by calling "env"), then loop over the printed environment variables in the parent process and call "export" on those variables.
The following code is based on Capturing output of find . -print0 into a bash array
If the parent shell is the bash, you can use
while IFS= read -r -d $'\0' line; do
export "$line"
done < <(bash -s <<< 'export VARNAME=something; env -0')
echo $VARNAME
If the parent shell is the dash, then read does not provide the -d flag and the code gets more complicated
TMPDIR=$(mktemp -d)
mkfifo $TMPDIR/fifo
(bash -s << "EOF"
export VARNAME=something
while IFS= read -r -d $'\0' line; do
echo $(printf '%q' "$line")
done < <(env -0)
EOF
) > $TMPDIR/fifo &
while read -r line; do export "$(eval echo $line)"; done < $TMPDIR/fifo
rm -r $TMPDIR
echo $VARNAME
Under OS X bash you can do the following:
Create the bash script file to unset the variable
#!/bin/bash
unset http_proxy
Make the file executable
sudo chmod 744 unsetvar
Create alias
alias unsetvar='source /your/path/to/the/script/unsetvar'
It should be ready to use so long you have the folder containing your script file appended to the path.
It's not what I would call outstanding, but this also works if you need to call the script from the shell anyway. It's not a good solution, but for a single static environment variable, it works well enough.
1.) Create a script with a condition that exits either 0 (Successful) or 1 (Not successful)
if [[ $foo == "True" ]]; then
exit 0
else
exit 1
2.) Create an alias that is dependent on the exit code.
alias='myscript.sh && export MyVariable'
You call the alias, which calls the script, which evaluates the condition, which is required to exit zero via the '&&' in order to set the environment variable in the parent shell.
This is flotsam, but it can be useful in a pinch.
You can invoke another one Bash with the different bash_profile.
Also, you can create special bash_profile for using in multi-bashprofile environment.
Remember that you can use functions inside of bashprofile, and that functions will be avialable globally.
for example, "function user { export USER_NAME $1 }" can set variable in runtime, for example: user olegchir && env | grep olegchir
Another option is to use "Environment Modules" (http://modules.sourceforge.net/). This unfortunately introduces a third language into the mix. You define the environment with the language of Tcl, but there are a few handy commands for typical modifications (prepend vs. append vs set). You will also need to have environment modules installed. You can then use module load *XXX* to name the environment you want. The module command is basically a fancy alias for the eval mechanism described above by Thomas Kammeyer. The main advantage here is that you can maintain the environment in one language and rely on "Environment Modules" to translate it to sh, ksh, bash, csh, tcsh, zsh, python (?!?!!), etc.
I created a solution using pipes, eval and signal.
parent() {
if [ -z "$G_EVAL_FD" ]; then
die 1 "Rode primeiro parent_setup no processo pai"
fi
if [ $(ppid) = "$$" ]; then
"$#"
else
kill -SIGUSR1 $$
echo "$#">&$G_EVAL_FD
fi
}
parent_setup() {
G_EVAL_FD=99
tempfile=$(mktemp -u)
mkfifo "$tempfile"
eval "exec $G_EVAL_FD<>'$tempfile'"
rm -f "$tempfile"
trap "read CMD <&$G_EVAL_FD; eval \"\$CMD\"" USR1
}
parent_setup #on parent shell context
( A=1 ); echo $A # prints nothing
( parent A=1 ); echo $A # prints 1
It might work with any command.
I don't see any answer documenting how to work around this problem with cooperating processes. A common pattern with things like ssh-agent is to have the child process print an expression which the parent can eval.
bash$ eval $(shh-agent)
For example, ssh-agent has options to select Csh or Bourne-compatible output syntax.
bash$ ssh-agent
SSH2_AUTH_SOCK=/tmp/ssh-era/ssh2-10690-agent; export SSH2_AUTH_SOCK;
SSH2_AGENT_PID=10691; export SSH2_AGENT_PID;
echo Agent pid 10691;
(This causes the agent to start running, but doesn't allow you to actually use it, unless you now copy-paste this output to your shell prompt.) Compare:
bash$ ssh-agent -c
setenv SSH2_AUTH_SOCK /tmp/ssh-era/ssh2-10751-agent;
setenv SSH2_AGENT_PID 10752;
echo Agent pid 10752;
(As you can see, csh and tcsh uses setenv to set varibles.)
Your own program can do this, too.
bash$ foo=$(makefoo)
Your makefoo script would simply calculate and print the value, and let the caller do whatever they want with it -- assigning it to a variable is a common use case, but probably not something you want to hard-code into the tool which produces the value.
Technically, that is correct -- only 'eval' doesn't fork another shell. However, from the point of view of the application you're trying to run in the modified environment, the difference is nil: the child inherits the environment of its parent, so the (modified) environment is conveyed to all descending processes.
Ipso facto, the changed environment variable 'sticks' -- as long as you are running under the parent program/shell.
If it is absolutely necessary for the environment variable to remain after the parent (Perl or shell) has exited, it is necessary for the parent shell to do the heavy lifting. One method I've seen in the documentation is for the current script to spawn an executable file with the necessary 'export' language, and then trick the parent shell into executing it -- always being cognizant of the fact that you need to preface the command with 'source' if you're trying to leave a non-volatile version of the modified environment behind. A Kluge at best.
The second method is to modify the script that initiates the shell environment (.bashrc or whatever) to contain the modified parameter. This can be dangerous -- if you hose up the initialization script it may make your shell unavailable the next time it tries to launch. There are plenty of tools for modifying the current shell; by affixing the necessary tweaks to the 'launcher' you effectively push those changes forward as well.
Generally not a good idea; if you only need the environment changes for a particular application suite, you'll have to go back and return the shell launch script to its pristine state (using vi or whatever) afterwards.
In short, there are no good (and easy) methods. Presumably this was made difficult to ensure the security of the system was not irrevocably compromised.
The short answer is no, you cannot alter the environment of the parent process, but it seems like what you want is an environment with custom environment variables and the shell that the user has chosen.
So why not simply something like
#!/usr/bin/env bash
FOO=foo $SHELL
Then when you are done with the environment, just exit.
You could always use aliases
alias your_env='source ~/scripts/your_env.sh'
I did this many years ago. If I rememeber correctly, I included an alias in each of .bashrc and .cshrc, with parameters, aliasing the respective forms of setting the environment to a common form.
Then the script that you will source in any of the two shells has a command with that last form, that is suitable aliased in each shell.
If I find the concrete aliases, I will post them.
Other than writings conditionals depending on what $SHELL/$TERM is set to, no. What's wrong with using Perl? It's pretty ubiquitous (I can't think of a single UNIX variant that doesn't have it), and it'll spare you the trouble.
I knew that there is a variable PWD which is changed when I type the command cd. But when I try to change it manually the current directory isn't changed. How to manipulate PWD directly?
POSIX describes PWD:
Assignments to this variable may be ignored.
Assignments are not special in bash, dash, ash, zsh or ksh, and the value will simply be overwritten next time the shell changes directory.
While other shells might support such a variable as well, the $PWD variable is generally specific to the bash shell.
The bash manual says:
PWD
The current working directory as set by the cd builtin.
Meaning it will be set when you use the cd builtin to change a directory but bash will not change the current directory when you set $PWD.
At least on my Mac and Linux machines running bash you can just overwrite the variable, so running PWD=/ will change your current directory (in the prompt) to /.
The variable PWD in bash is in control of the shell's working directory (again only the prompt) and you will see that the directory after the PWD= command has been changed but the pwd command isn't impacted by the change.
<0>xxxx#dhcp89-089-034:~$ PWD=/
<0>xxxx#dhcp89-089-034:/$ pwd
/Users/xxxx
Now the environment variable PWD is a bash prompt thing and is not the real working directory, nor is modifying it a useful thing to do unless you actually use the 'cd' command.