How to set the Focus to a License Agreement Checkbox control using NSIS - nsis

I wanted to set the by default Focus to the "License Agreement" checkbox in the License Agreement Page using NSIS. And then the taborder should work.
Please help me how to set the focus?
Below is my code snippet:
!include LogicLib.nsh
!define MUI_TEXT_WELCOME_INFO_TITLE $(welcometitle)
!define MUI_TEXT_WELCOME_INFO_TEXT $(welcometext)
!insertmacro MUI_PAGE_WELCOME
!define MUI_LICENSEPAGE_CHECKBOX ""
!define MUI_INNERTEXT_LICENSE_BOTTOM ""
!define MUI_INNERTEXT_LICENSE_TOP ""
!define MUI_INNERTEXT_LICENSE_BOTTOM_CHECKBOX ""
!define MUI_TEXT_LICENSE_TITLE $(licensetitle)
!define MUI_TEXT_LICENSE_SUBTITLE $(licensesubtitle)
!define MUI_LICENSEPAGE_CHECKBOX_TEXT $(licensecheckboxtext)
!insertmacro MUI_PAGE_LICENSE "C:\Program Files (x86)\NSIS\Docs\Modern UI 2\license.txt"
!define MUI_DIRECTORYPAGE_TEXT_TOP $(mydirtoptext)
!define MUI_TEXT_DIRECTORY_TITLE $(mydirtitle)
!define MUI_TEXT_DIRECTORY_SUBTITLE $(mydirsubtitle)
!insertmacro MUI_PAGE_DIRECTORY
!insertmacro MUI_PAGE_INSTFILES
!define MUI_TEXT_FINISH_INFO_TITLE $(Finishpagetitle)
!define MUI_TEXT_FINISH_INFO_TEXT $(Finishpagesubtitle)
!define MUI_FINISHPAGE_RUN ""
!define MUI_FINISHPAGE_RUN_TEXT $(FinishonlineReg)
!insertmacro MUI_PAGE_FINISH
!insertmacro MUI_UNPAGE_INSTFILES
;--------------------------------
!insertmacro MUI_LANGUAGE "English"
; The stuff to install
Section "My TestApp (required)"
SectionEnd

The Windows UI guidelines says:
For keyboard navigation, tab order should flow in a logical order, generally from left to right, top to bottom.
but if you think you must force then you can do this:
!include WinMessages.nsh
!include MUI2.nsh
!insertmacro MUI_PAGE_WELCOME
!define MUI_LICENSEPAGE_CHECKBOX ""
!define MUI_PAGE_CUSTOMFUNCTION_SHOW myForceLicenseFocus
!insertmacro MUI_PAGE_LICENSE "${__FILE__}"
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_LANGUAGE English
Function myForceLicenseFocus
!if ${MUI_SYSVERSION} >= 2.0
FindWindow $0 "BUTTON" "" $mui.LicensePage
!else
FindWindow $0 "#32770" "" $hWndParent
FindWindow $0 "BUTTON" "" $0
!endif
System::Call 'USER32::SetFocus(pr0)'
!define /ifndef WM_CHANGEUISTATE 0x127
System::Call 'USER32::PostMessage(pr0,i${WM_CHANGEUISTATE},p0x30002,p0)' ; This forces the checkbox to display the focus rectangle
System::Call 'USER32::SetWindowPos(pr0,p0,i,i,i,i,i0x13)' ; Change tab order
FunctionEnd

Related

NSIS Custom Page with Custom Header Text

I am creating a custom page and trying to change the the different page areas, but cant figure out how I have tried several thing and in different spots.
here are the areas I am looking to chance (And I can on like the license page but cant figure out the code for custom pages)
!define MUI_LICENSEPAGE_TEXT_TOP "Change Log of ${PRODUCT_NAME} v${PRODUCT_VERSION}"
!define MUI_LICENSEPAGE_TEXT_BOTTOM " "
!define MUI_LICENSEPAGE_BUTTON "Next" # or "Next" if you have other pages between the changelog and the InstFiles page
!define MUI_PAGE_HEADER_TEXT "Change Log"
!define MUI_PAGE_HEADER_SUBTEXT "Overview of changes in Drive Content"
here is the code I am working with
!define FolderDocs "Included\Docs"
!define FolderImages "Included\Images"
!define FolderAudio "Included\Audio"
!define FolderData "Included\Data"
!define DocLicense "License.txt"
!define DocChangeLog "ChangeLog.txt"
!define DocMustRead "MustRead.txt"
!define ImageIcon "Icon.ico"
!define ImageHDR "HDR.bmp"
!define ImageWF "WF.bmp"
!define ImageSplash "Splash.bmp"
!define PRODUCT_NAME "Test"
!define PRODUCT_VERSION "1.0"
!define MUI_ICON ".\${FolderImages}\${ImageIcon}"
Icon ".\${FolderImages}\${ImageIcon}"
!include WinVer.nsh
!include LogicLib.nsh
!include x64.nsh
!include FileFunc.nsh
!include MUI.nsh
!include WinMessages.nsh
!include InstallOptions.nsh
!include Sections.nsh
!include nsDialogs.nsh
!define MUI_HEADERIMAGE
!define MUI_HEADERIMAGE_BITMAP ".\${FolderImages}\${ImageHDR}"
!define MUI_WELCOMEFINISHPAGE_BITMAP ".\${FolderImages}\${ImageWF}"
!define MUI_ABORTWARNING
!define MUI_PAGE_HEADER_TEXT "Change Log" #DOES NOT WORK
!define MUI_PAGE_HEADER_SUBTEXT "Overview of changes in Drive Content" #DOES NOT WORK
Page custom SetCustom ValidateCustom
!insertmacro MUI_LANGUAGE "English"
See the "Custom pages" section of the readme?
!include MUI2.nsh
...
Page Custom MyPageCreate
!insertmacro MUI_LANGUAGE "English"
Function MyPageCreate
!insertmacro MUI_HEADER_TEXT "Blah" "blah blah blah"
nsDialogs::...
FunctionEnd

How to change MUI_INSTFILESPAGE_FINISHHEADER_SUBTEXT if exists two MUI_PAGE_INSTFILES

I have managed to customize the message shown in the title / subtitle after installation:
!define APP_NAME 'Test15'
name ${APP_NAME}
outfile '${APP_NAME}.exe'
showinstdetails show
InstallDir '$PROGRAMFILES\${APP_NAME}'
!include 'mui.nsh'
Var CompletedText
CompletedText $CompletedText
Var MUI_HeaderText
Var MUI_HeaderSubText
!define MUI_INSTFILESPAGE_FINISHHEADER_TEXT "$MUI_HeaderText"
!define MUI_INSTFILESPAGE_FINISHHEADER_SUBTEXT "$MUI_HeaderSubText"
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_LANGUAGE "English"
Section "One"
MessageBox MB_OK "Section One"
SectionEnd
Section -"Post"
;MessageBox MB_OK "Section Post"
StrCpy $CompletedText "My custom text"
StrCpy $MUI_HeaderText "My custom header text"
StrCpy $MUI_HeaderSubText "My custom header subText"
;MessageBox MB_OK "OUTING Section Post"
SectionEnd
My problem is that when I need to add a second part installation (it is a new mandatory requirement), and then not get modify / customize messages title / subtitle shown at the end:
!define APP_NAME 'Test15'
name ${APP_NAME}
outfile '${APP_NAME}.exe'
showinstdetails show
InstallDir '$PROGRAMFILES\${APP_NAME}'
!include 'mui.nsh'
Var CompletedText
CompletedText $CompletedText
Var MUI_HeaderText
Var MUI_HeaderSubText
!define MUI_INSTFILESPAGE_FINISHHEADER_TEXT "$MUI_HeaderText"
!define MUI_INSTFILESPAGE_FINISHHEADER_SUBTEXT "$MUI_HeaderSubText"
!insertmacro MUI_PAGE_INSTFILES
;This my second part instalation!!
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_LANGUAGE "English"
Section "One"
MessageBox MB_OK "Section One"
SectionEnd
Section -"Post"
;MessageBox MB_OK "Section Post"
StrCpy $CompletedText "My custom text"
StrCpy $MUI_HeaderText "My custom header text"
StrCpy $MUI_HeaderSubText "My custom header subText"
;MessageBox MB_OK "OUTING Section Post"
SectionEnd
Now, the same message is always displayed at the end for Title/Subtitle: "Installation Complete" // "Setup was completed successfully.". Nevertheless, the 'completed' text value is modified successfully ("My custom text").
Please, can anyone help me?
Thanks in advance!
If you read the MUI documentation carefully you will find this in the "Page settings" section:
Page settings apply to a single page and should be set before inserting a page macro. The same settings can be used for installer and uninstaller pages. You have to repeat the setting if you want it to apply to multiple pages.
Only the defines listed under "Interface settings" are global.
!include MUI.nsh
!define MUI_PAGE_HEADER_TEXT "Install page #1"
!define MUI_PAGE_HEADER_SUBTEXT "Foo foo foo"
!define MUI_INSTFILESPAGE_FINISHHEADER_TEXT "Did part 1"
!define MUI_INSTFILESPAGE_FINISHHEADER_SUBTEXT "..."
!insertmacro MUI_PAGE_INSTFILES
!define MUI_PAGE_HEADER_TEXT "Install page #2"
!define MUI_PAGE_HEADER_SUBTEXT "Bar bar bar!"
!define MUI_INSTFILESPAGE_FINISHHEADER_TEXT "All done"
!define MUI_INSTFILESPAGE_FINISHHEADER_SUBTEXT "ZZZzzz.."
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_LANGUAGE "English"

Nsis: Change Title bar for Two installations in one installer

I have two installations in one installer from:
http://nsis.sourceforge.net/Two_installations_in_one_installer
How can I customize the title bar (setup name) for the two installations?
NSIS is not really designed to do this so you have to set it manually every time a page changes:
!include MUI.nsh
!include WinMessages.nsh
Caption " "
!define MUI_PAGE_CUSTOMFUNCTION_SHOW lic1
!insertmacro MUI_PAGE_LICENSE "${__FILE__}"
!define MUI_PAGE_CUSTOMFUNCTION_SHOW inst1
!insertmacro MUI_PAGE_INSTFILES
!define MUI_PAGE_CUSTOMFUNCTION_SHOW lic2
!insertmacro MUI_PAGE_LICENSE "${__FILE__}"
!define MUI_PAGE_CUSTOMFUNCTION_SHOW inst2
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_LANGUAGE English
Function lic1
SendMessage $HWNDPARENT ${WM_SETTEXT} 0 "STR:Foo$(^LicenseSubCaption)"
FunctionEnd
Function inst1
SendMessage $HWNDPARENT ${WM_SETTEXT} 0 "STR:Foo$(^InstallingSubCaption)"
FunctionEnd
Function lic2
SendMessage $HWNDPARENT ${WM_SETTEXT} 0 "STR:Bar$(^LicenseSubCaption)"
FunctionEnd
Function inst2
SendMessage $HWNDPARENT ${WM_SETTEXT} 0 "STR:Bar$(^InstallingSubCaption)"
FunctionEnd

NSIS - add CreateText to MUI FINISH PAGE

I have an NSIS installer which at completion of the install sends an e-mail with a couple different logs attached. I'd like to allow the user to add their e-mail address to receive the e-mail and I'd like for them to enter it on the finish page because it seem most appropriate. How can I add a text box on the finish page for the user to enter their e-mail address into?
Here is my current finish page:
;Finish page
!Define MUI_FINISHPAGE_RUN
!Define MUI_FINISHPAGE_RUN_TEXT 'Open Install Log'
!Define MUI_FINISHPAGE_RUN_NOTCHECKED
!define MUI_FINISHPAGE_RUN_FUNCTION 'LaunchLog'
!define MUI_FINISHPAGE_LINK 'Click here to visit us at co.com.'
!define MUI_FINISHPAGE_LINK_LOCATION http://www.co.com/
!define MUI_FINISHPAGE_TEXT_LARGE
!define MUI_FINISHPAGE_TEXT "text text text"
!insertmacro MUI_PAGE_FINISH
!include MUI2.nsh ;If you are using MUI v1 you need to replace NSD_* with .ini file commands
!include Logiclib.nsh
...
!ifndef EM_SETCUEBANNER
!define EM_SETCUEBANNER 0x1501 ; NT5 w/Themes & Vista+
!endif
Var EMailEdit
Function CustomizeFinishPage
${NSD_CreateText} 120u 144u 180u 12u ""
Pop $EMailEdit
System::Call 'USER32::SendMessage(i$EMailEdit,i${EM_SETCUEBANNER},i0,w"E-mail address goes here...")'
FunctionEnd
Function SendFinishMail
${NSD_GetText} $EMailEdit $0
${If} $0 == "" ; TODO: Verify address by at least checking for *#*.*
MessageBox mb_iconstop "You must enter a valid address!"
Abort
${EndIf}
MessageBox mb_ok "TODO: Send mail to: $0"
FunctionEnd
...
!insertmacro MUI_PAGE_*
;Finish page
!define MUI_FINISHPAGE_RUN
!define MUI_FINISHPAGE_RUN_TEXT 'Open Install Log'
!define MUI_FINISHPAGE_RUN_NOTCHECKED
!define MUI_FINISHPAGE_RUN_FUNCTION 'LaunchLog'
!define MUI_FINISHPAGE_SHOWREADME "" #Used as our email checkbox
!define MUI_FINISHPAGE_SHOWREADME_TEXT "E-mail me some crap:"
!define MUI_FINISHPAGE_SHOWREADME_NOTCHECKED
!define MUI_FINISHPAGE_SHOWREADME_FUNCTION SendFinishMail
!define MUI_FINISHPAGE_LINK 'Click here to visit us at co.com.'
!define MUI_FINISHPAGE_LINK_LOCATION http://www.co.com/
!define MUI_FINISHPAGE_TEXT_LARGE
!define MUI_FINISHPAGE_TEXT "text text text"
!define MUI_PAGE_CUSTOMFUNCTION_SHOW CustomizeFinishPage
!insertmacro MUI_PAGE_FINISH
!insertmacro MUI_LANGUAGE English

NSIS Change Header Image Based on Language Selection

I am using NSIS to create an installer. How can I change the header image (MUI_HEADERIMAGE_BITMAP) based on the users language selection at install?
!define MUI_HEADERIMAGE
!define MUI_CUSTOMFUNCTION_GUIINIT myGuiInit
!include MUI2.nsh
!insertmacro MUI_PAGE_WELCOME
!insertmacro MUI_PAGE_COMPONENTS
...
!insertmacro MUI_LANGUAGE English
!insertmacro MUI_LANGUAGE Swedish
Function .onInit
!insertmacro MUI_LANGDLL_DISPLAY
FunctionEnd
Function myGUIInit
InitPluginsDir
${If} ${LANG_ENGLISH} = $Language
File "/oname=$PluginsDir\langspecifichdr.bmp" "${NSISDIR}\Contrib\Graphics\Header\orange.bmp"
${Else}
File "/oname=$PluginsDir\langspecifichdr.bmp" "${NSISDIR}\Contrib\Graphics\Header\win.bmp"
${EndIf}
SetBrandingImage /IMGID=1046 "$PluginsDir\langspecifichdr.bmp"
FunctionEnd

Resources