I'm trying to search into the files the word: "http://{$_SERVER["HTTP_HOST"]}"
and if I find some line with that item I want to add /suitecrm/ next to the closing curly brace "}"
or replace it with: 'http://{$_SERVER["HTTP_HOST"]}/suitecrm' , but I need to escape the brackets without losing them,
How can I do that? please!!!
this is my code:
sudo grep -lir "HTTP_HOST" /var/www/html/suitecrm/ | xargs sudo sed -i 's,http://{$_SERVER["HTTP_HOST"]},http://{$_SERVER["HTTP_HOST"]}/suitecrm,g’ ;
Try:
sed -i 's,http://{\$_SERVER\["HTTP_HOST"\]},http://{\$_SERVER\["HTTP_HOST"\]}/suitecrm,g’
Eg:
$ echo 'http://{$_SERVER["HTTP_HOST"]}' | sed 's,http://{\$_SERVER\["HTTP_HOST"\]},http://{\$_SERVER\["HTTP_HOST"\]}/suitecrm,'
http://{$_SERVER["HTTP_HOST"]}/suitecrm
Actually I just batch replaced $ to \$, [ to \[, and ] to \].
It's called Escaping, certain characters have special meanings in RE, when you refer to them literally, you have to Escape them.
Check this:
Escapes
Related
How to escape a single quote in a sed expression that is already surrounded by quotes?
For example:
sed 's/ones/one's/' <<< 'ones thing'
Quote sed codes with double quotes:
$ sed "s/ones/one's/"<<<"ones thing"
one's thing
I don't like escaping codes with hundreds of backslashes – hurts my eyes. Usually I do in this way:
$ sed 's/ones/one\x27s/'<<<"ones thing"
one's thing
One trick is to use shell string concatenation of adjacent strings and escape the embedded quote using shell escaping:
sed 's/ones/two'\''s/' <<< 'ones thing'
two's thing
There are 3 strings in the sed expression, which the shell then stitches together:
sed 's/ones/two'
\'
's/'
Escaping single quote in sed: 3 different ways:
From fragile to solid...
Note: This answer is based on GNU sed!!
1. Using double-quotes to enclose sed script:
Simpliest way:
sed "s/ones/one's/" <<< 'ones thing'
But using double-quote lead to shell variables expansion and backslashes to be considered as shell escape before running sed.
1.1. Specific case without space and special chars
In this specific case, you could avoid enclosing at shell level (command line):
sed s/ones/one\'s/ <<<'ones thing'
will work until whole sedscript don't contain spaces, semicolons, special characters and so on... (fragile!)
2. Using octal or hexadecimal representation:
This way is simple and efficient, if not as readable as next one.
sed 's/ones/one\o047s/' <<< 'ones thing'
sed 's/ones/one\x27s/' <<< 'ones thing'
And as following character (s) is not a digit, you coul write octal with only 2 digits:
sed 's/ones/one\o47s/' <<< 'ones thing'
3. Creating a dedicated sed script
cat <<eosedscript >sampleSedWithQuotes.sed
#!$(which sed) -f
s/ones/one's/;
eosedscript
chmod +x sampleSedWithQuotes.sed
From there, you could run:
./sampleSedWithQuotes.sed <<<'ones thing'
one's thing
This is the strongest and simpliest solution as your script is the most readable:$ cat sampleSedWithQuotes.sed
#!/bin/sed -f
s/ones/one's/;
3.1 You coud use -i sed flag:
As this script use sed in shebang, you could use sed flags on command line. For editing file.txt in place, with the -i flag:
echo >file.txt 'ones thing'
./sampleSedWithQuotes.sed -i file.txt
cat file.txt
one's thing
3.2 Mixing quotes AND double quotes
Using dedicated script may simplify mixing quotes and double quotes in same script.
Adding a new operation in our script to enclose the word thing in double quotes:
echo >>sampleSedWithQuotes.sed 's/\bthing\b/"&"/;'
( now our script look like:
#!/bin/sed -f
s/ones/one's/;
s/\bthing\b/"&"/;
)
then
./sampleSedWithQuotes.sed <<<'ones thing'
one's "thing"
The best way is to use $'some string with \' quotes \''
eg:
sed $'s/ones/two\'s/' <<< 'ones thing'
Just use double quotes on the outside of the sed command.
$ sed "s/ones/one's/" <<< 'ones thing'
one's thing
It works with files too.
$ echo 'ones thing' > testfile
$ sed -i "s/ones/one's/" testfile
$ cat testfile
one's thing
If you have single and double quotes inside the string, that's ok too. Just escape the double quotes.
For example, this file contains a string with both single and double quotes. I'll use sed to add a single quote and remove some double quotes.
$ cat testfile
"it's more than ones thing"
$ sed -i "s/\"it's more than ones thing\"/it's more than one's thing/" testfile
$ cat testfile
it's more than one's thing
This is kind of absurd but I couldn't get \' in sed 's/ones/one\'s/' to work. I was looking this up to make a shell script that will automatically add import 'hammerjs'; to my src/main.ts file with Angular.
What I did get to work is this:
apost=\'
sed -i '' '/environments/a\
import '$apost'hammerjs'$apost';' src/main.ts
So for the example above, it would be:
apost=\'
sed 's/ones/one'$apost's/'
I have no idea why \' wouldn't work by itself, but there it is.
Some escapes on AppleMacOSX terminals fail so:
sed 's|ones|one'$(echo -e "\x27")'s|1' <<<'ones thing'
I know this is going to sound like a cop out but I could never get sed working when there were both single and double quotes in the string. To help any newbies like me that are having trouble, one option is to split up the string. I had to replace code in over 100 index.hmtl files. The strings had both single and double quotes so I just split up the string and replaced the first block with
<!-- and the second block with -->. It made a mess of my index.html files but it worked.
use an alternative string seperator like ":" to avoid confusion with different slashes
sed "s:ones:one's:" <<< 'ones thing'
or if you wish to highligh the single quote
sed "s:ones:one\'s:" <<< 'ones thing'
both return
one's thing
The following is my sed script:
#!/bin/bash
sed -r 's/^\s+?\/\/.*$/d/;
s/LOG.debug/System.out.println/g' "$1"
What the first command should do is delete all lines beginning with // preceded by any number of spaces or tabs. The only problem is instead of deleting those lines, it replaces them with a literal 'd'.
If you need to remove the matching lines, you should not use the s command.
Use
sed '/^[[:blank:]]*\/\//d; s/LOG\.debug/System.out.println/g' "$1"
# ^^^^^^^^^^^^^^^^^^^^
Also, note that to match a literal dot, you need to escape it, hence, LOG\.debug.
See an online sed demo.
I know I can use grep -v '^#' to remove lines starting with #
now I run into issues when I try to do this to remove the [
ie. grep -v '^[' or even sed '/^[/ d'
Why is this happening and how can accomplish this?
Consider this test file:
$ cat brackets
keep
[remove]
Using grep:
$ grep -v '^\[' brackets
keep
Or:
$ grep -v '^[[]' brackets
keep
Using sed:
$ sed '/^\[/d' brackets
keep
Or:
$ sed '/^[[]/d' brackets
keep
Why
When a computer command fails to work as expected, it is important to look at the error message. Consider:
$ grep -vE '^[' brackets
grep: Invalid regular expression
The error message is reporting that an invalid regular expression was found. This is because [ is a regex-active character: [...] is used to define a character list. Thus, if a regex contains an unescaped [, it must also contain a matching ]. There are two ways to avoid this:
Escape it. If [ is a regex-active character, then \[ will generally be treated as a regular (inactive) character.
Put it in a character list. [[] is a character list that matches only one character: [.
I trying to find and replace items using bash. I was able to use sed to grab out some of the characters, but I think I might be using it in the wrong matter.
I am basically trying to remove the characters after ";" and before "," including removing ","
sed -e 's/\(;\).*\(,\)/\1\2/'
That is what I used to replace it with nothing. However, it ends up replacing everything in the middle so my output came out like this:
cmd2="BMC,./socflash_x64 if=B600G3_BMC_V0207.ima;,reboot -f"
This is the original text of what I need to replace
cmd2="BMC,./socflash_x64 if=B600G3_BMC_V0207.ima;X,sleep 120;after_BMC,./run-after-bmc-update.sh;hba_fw,./hba_fw.sh;X,sleep 5;DB,2;X,reboot -f"
Is there any way to make it look like this output?
./socflash_x64 if=B600G3_BMC_V0207.ima;sleep 120;./run-after-bmc-update.sh;./hba_fw.sh;sleep 5;reboot -f
Ff there is any way to make this happen other than bash I am fine with any type of language.
Non-greedy search can (mostly) be simulated in programs that don't support it by replacing match-any (dot .) with a negated character class.
Your original command is
sed -e 's/\(;\).*\(,\)/\1\2/'
You want to match everything in between the semi-colon and the comma, but not another comma (non-greedy). Replace .* with [^,]*
sed -e 's/\(;\)[^,]*\(,\)/\1\2/'
You may also want to exclude semi-colons themselves, making the expression
sed -e 's/\(;\)[^,;]*\(,\)/\1\2/'
Note this would treat a string like "asdf;zxcv;1234,qwer" differently, since one would match ;zxcv;1234, and the other would match only ;1234,
In perl:
perl -pe 's/;.*?,/;/g;' -pe 's/^[^,]*,//' foo.txt
will output:
./socflash_x64 if=B600G3_BMC_V0207.ima;sleep 120;./run-after-bmc-update.sh;./hba_fw.sh;sleep 5;2;reboot -f
The .*? is non greedy matching before the comma. The second command is to remove from the beginning to the comma.
Something like:
echo $cmd2 | tr ';' '\n' | cut -d',' -f2- | tr '\n' ';' ; echo
result is:
./socflash_x64 if=B600G3_BMC_V0207.ima;sleep 120;./run-after-bmc-update.sh;./hba_fw.sh;sleep 5;2;reboot -f;
however, I thing your requirements are a few more complex, because 'DB,2' seems a particular case. After "tr" command, insert a "grep" or "grep -v" to include/exclude these cases.
HI
I am not very good with linux shell scripting.I am trying following shell script to replace
revision number token $rev -<rev number> in all html files under specified directory
cd /home/myapp/test
set repUpRev = "`svnversion`"
echo $repUpRev
grep -lr -e '\$rev -'.$repUpRev.'\$' *.html | xargs sed -i 's/'\$rev -'.$repUpRev.'\$'/'\$rev -.*$'/g'
This seems not working, what is wrong with the above code ?
rev=$(svnversion)
sed -i.bak "s/$rev/some other string/g" *.html
What is $rev in the regexp string? Is it another variable? Or you're looking for a string '$rev'. If latter - I would suggest adding '\' before $ otherwise it's treated as a special regexp character...
This is how you show the last line:
grep -lr -e '\$rev -'.$repUpRev.'\$' *.html | xargs sed -i 's/'\$rev -'.$repUpRev.'\$'/'\$rev -.*$'/g'
It would help if you showed some input data.
The -r option makes the grep recursive. That means it will operate on files in the directory and its subdirectories. Is that what you intend?
The dots in your grep and sed stand for any character. If you want literal dots, you'll need to escape them.
The final escaped dollar sign in the grep and sed commands will be seen as a literal dollar sign. If you want to anchor to the end of the line you should remove the escape.
The .* works only as a literal string on the right hand side of a sed s command. If you want to include what was matched on the left side, you need to use capture groups. The g modifier on the s command is only needed if the pattern appears more than once in a line.
Using quote, unquote, quote, unquote is hard to read. Use double quotes to permit variable expansion.
Try your grep command by itself without the xargs and sed to see if it's producing a list of files.
This may be closer to what you want:
grep -lr -e "\$rev -.$repUpRev.$" *.html | xargs sed -i "s/\$rev -.$repUpRev.$/\$rev -REPLACEMENT_TEXT/g"
but you'll still need to determine if the g modifier, the dots, the final dollar signs, etc., are what you intend.