I'm scanning an Elixir project by reading the mix.lock file and parsing the output of mix deps.tree command. Later on I need to locate each dependency's .tar file. On my windows machine the location is inside the C:\Users\{user-name}\.hex\packages\hexpm folder.
However on my linux machine, the .hex folder contains only cache.ets file, but no packages folder. Searching for .tar files returns nothing relevant.
Any idea where are those files hiding?
cheers,
eRez
Should be under in your home: ~/.hex
But the archives seems to be located in ~/.mix/archives/
For example, if I try to upgrade my hex:
~ > mix local.hex
Found existing entry: /home/meox/.mix/archives/hex-0.18.1
You can find that on ~/.hex/packages/hexpm.
apparently the project on which a ran my tests was the first hex project on that machine, and running the mix deps.get didn't result any .tar files in the cache as expected, but when i switched to a different project all was back to normal and indeed everything as under ~/.hex/packages/hexpm
Related
I want to install Mingw-W64, but the download is in winrar form not in a .exe. When I extract, it the folder is filled with bunch of files. None of them contains the installer.
I searched, but nothing is working. All I want is the installer.exe but every time it's just an archive.
I found a video, but there is a problem when I tried the instructions. The download kept restarting and nothing happened. When I extracted the archive the files are not same as shown in the video.
There is a windows installer at the msys2 official website https://www.msys2.org/ . Follow the guides for a successful installation.
Alternatively you need to extract the downloaded files to a path like the root of your C: drive and add the contents to your system or user path as an environment variable.
I need to get the content of archives and then I want to uncompress the selected one - but I dont want to uncompress the archives to know what's in it. I'd like to list and uncompress at least zip and rar, but (if that's possible) I don't want to be limited to only these two.
Can you advise good npm modules or other projects to achieve this?
Here's what I came up with:
zip
I found node-zip can only unzip files, but not list archive content.
rar
The best solution seems node-rar, but I can't install it on Windows.
node-uncompress This does what it says: It's an "Command-line wrapper for uncompressing various file types." So there is again no possibility to list archive content.
Currently I try to get node-uncompress to list files and hopefully it must never run cross-platform.
Solution:
I am now using 7zip with the node module node-7z instead of trying to get every archive working on its own. The corresponding site is: https://www.npmjs.com/package/node-7z
This library uses the OS independent archive manager 7zip. On Windows 7za is used. "7za.exe (a = alone) is a standalone version of 7-Zip". I've tested it on Windows and Ubuntu and it works great.
Update:
At Windows: Somehow I just got it working by adding 7za to the Path variables - not by adding 7za.exe to the "the same directory of your package.json file." like the description says.
Update 2:
On Windows 7za, that's referred in the node-7z post, cannot handle .rar-archives. So I'm using the "casual" 7-zip instead of 7za.exe. I just renamed the commanline 7z.exe to 7za.exe and added the 7-zip folder to the Path Variables.
Working on a web site. A number of third party javascript libraries use mixed-case in their files and folders.
I am working on a windows system.
When ready to upload from my local windows XAMPP environment to my linux hosting, I use 7zip to create a zip file of my site. I use 7zip's -xr! feature to skip certain directories like my .git repository.
I FTP the resulting .zip file to my server and use the server's "unzip" function to explode it. All my files are there but they are all changed to lowercase!
This kills the website as the third party libraries that are mixed-case are no longer found.
I've tried unzip -C but that did not seem to do anything.
I also look in the archive prior to uploading and on windows, all the file name cases are preserved.
Tried using GNU32's windows tar but the --exclude function is not allowing me to skip the .git directories.
I need some help in the form of:
How to use unzip in linux such that is preserves case (googled until hairless, but no love found...)
How to use tar on windows such that it excludes particular directories
How to use something else to achieve my goal. I honestly don't care what it is... I'm downloading CYGWIN right now to see if it'll help at all. I may end up installing Linux in a virtual box just to try tar-gz from a virtual machine actually running linux but would REALLY rather avoid that hassle every time I want to pack up a pretty simple archive.
Zip works fine for packing, but unpacking is not kosher.
Use tar's --exclude-vcs option:
--exclude-vcs
exclude version control system directories
Example:
tar --exclude-vcs czf foo.tar.gz foo
or for a *.tar.bz2 archive
tar --exclude-vcs cjf foo.tar.bz2 foo
Try unzip -U file.zip; this might work if you have an old version of unzip. Otherwise, post the output of unzip -v and unzip -l file.zip.
I am trying to install mod_java on ubuntu.
I have installed the latest java(1.6).
I have configured freeswitch with mod_java module enabled in module.conf.xml
then when i run the make file, it says:
freeswitch_java.h:5:17: error: jni.h: No such file or directory
I have searched through the java installtion folders, but did not find any include folder or jni.h.
Can anyone help, what is being the problem here.
Thanks for reading this question.
I had the same problem. The solution was to run configure with the option --with-java:
./configure --with-java=/usr/lib/jvm/java-1.6.0-openjdk/include/
I don't know if it makes any difference but I added mod_java after building freeswitch without it. It was disabled in my initial build in module.conf.xml but afterwards I ran the above command plus:
make mod_java-install
It worked for me on ubuntu with openjdk. Are you using the Sun JDK? Maybe in the version you have dont have the include folder which has the source files. Try installing the other JDK. Or try and see of ther are some other related packages in apt that will get you the include folder.
Type this linux command to locate your jni.h file on your filesystem.
locate jni.h
you should be able to get it somewhere
in /usr/lib/java directory or some other directory
depending upon your java home.
copy paste the jni.h in src/include folder of your freeswitch src.
It will throw you some more errors for different .h files
just copy all of them to your src/include folder.
in latest freeswitch, installing through Makefile, its not possible to configure as the Makefile downloads and installs. Its possible by modifying the Makefile.in file to add the include path
mod_java_la_CPPFLAGS
-I/usr/lib/jvm/default-java/include \
InnoSetup appears to be corrupting my executable when compiling the setup project.
Executing the source file works fine, but executing the file after installation produces Win32 error 1006 "The volume for a file has been externally altered".
I've tried disabling compression and setting various flags, to no avail.
Has anyone experienced this?
UPDATE
Okay there's been some twists to the situation:
At the moment, I can even manually copy a working file to the location it is installed to and get "The volume for a file...". To be clear: I uninstall the application, create the same folder and paste the files there and run.
UPDATE 2
Some more details for those that want it:
The InnoSetup script is compiled by FinalBuilder using output from msbuild, also executed by FinalBuilder, running on my machine with XP SP3. The executable is a C# .Net assembly compiled in configuration Release|AnyCPU. The file works when executed in the folder the Install Script takes it from. It produces the same behaviour on an XP Virtual Machine. The MD5 hashes of the source file and the installed file are the same.
Ok, I just received this same error. I have a config which my executable uses. I looked in my folder a million times - but finally notice the config file was zero length. I corrected the config and the error stopped occurring.
Check the simplest things first... good lucK!
ERROR_FILE_INVALID
1006 (0x3EE): The volume for a file has been externally altered so that the opened file is no longer valid.
I suspect you're having this issue after moving the files to a network share. It seems to me that what's happening is you have an open file-handle - possibly to a temporary file you are creating - and then some other process (perhaps running on a different host) is coming along and renaming or deleting that file or its' parent directory tree.
So my advice is:
Try installing to a local directory
Run after an anti-virus scan, in
safe-mode or on a different machine
to see if there isn't some
background nasty changing
volume/directory properties while
your program is running.
Make sure the program itself isn't doing anything weird with the volume or directory tree you're working with.
Never seen that before. I've got a few questions and suggestions:
- Are you signing the EXE during the compile of the setup? If so, try leaving that part out.
- WHat OS are you installing on or does it happen on all machines you've tried?
- Run the install with the /LOG="c:\install.log" option and post the log. It might show something happening during install.
- Run a byte compare or MD5 check on the source EXE and the installed EXE. Are they the same? Do they have the same version resource?