Since last week, my SSIS packages running in Azure Data Factory (v2) are failing one by one. They haven't changed though. All the packages are failing with the same series of errors, as shown below.
The packages are running perfectly in Visual Studio, but when I deploy them to Data Factory, I got these messages.
Any thoughts on where to look?
I've tried to recompiled the script components, to redeploy the whole project. I've also tried to copy the C# code into a new component, unfortunately results in the same issue.
So I was driven kind of crazy by this, had the exact same problem, and was troubleshooting with the assistance of Innovative Architects, a group near Atlanta. And we discovered that LITERALLY TODAY Microsoft released an updated version that fixes this exact problem. So apparently it was a bug that they fixed.
See here for the fix.
Related
We are transitioning to DNN 9.01.01 build, but it seems that the import/export feature is not working properly. I submitted an import but it has been sitting on submitted status for the last 8 hours.
Is this a known issue or is there configuration on the server that preventing the import/export to work?
Our instance is installed on Azure
Thanks
This thread hasn't been touched in a long time but I dug around and found the problem. I fixed this problem by directly editing the DNN database. I'm on version 9.4 although, I'm sure this would work with any version as this issue is apparently caused some wonky code in the Azure AppService deployment packages.
To resolve, I just had to manually edit the dbo.Schedule table. I use Azure Data Studio because I'm on a Mac but SSMS or any other manager will work as well. I'm sure you can even use the DNN built-in editor although I'm not very familiar with it.
While digging through the dependencies I noticed that unlike the non-operational Export/Import job, all the working jobs had a NULL value in the "Server" field whereas the Export/Import job had the Azure server name written to it. I manually changed the value of this field to NULL and the Site Import job that had been perpetually spinning, started immediately.
Also, for posterity, you will want to make sure you don't have 15 different import jobs queued up before you do this because they will ALL begin processing once you commit the new value to the DB. If it took you a few times to figure out they were spinning you will probably want to go to the scheduler and delete anything you don't want to run prior to the DB edit.
Hope this helps save someone else some time. Cheers!
We contacted support as well and looks like it was an issue with installing DNN as Azure webapps.
We had to delete all the unused server and set the task to run on the current active server and start the import/export feature manually on the scheduler tab.
I had this issue, when checking the other task scheduled for execution I noticed the server field was empty while on the import/export there were comma separated inputs. When I cleared the import/export field the task ran correctly.
I believe they left out coded for this I'm DNN 9. I tried using it for a customer and it was useless.
I inquired and got a response that said it was an oversight.
To add to the possible issues that can cause this, We had renamed our server and the scheduled task still had the original name of the server. Once we changed the name to the new one under the task, it started running as scheduled.
HTH
Dave
I am publishing my node js site to azure using this tutorial - http://blogs.technet.com/b/sams_blog/archive/2014/11/14/azure-websites-deploy-node-js-website-using-visual-studio.aspx
I get the following error, as mentioned in one of the comments on the blog, any idea what this error is about and how do I fix this ? I am able to run my app locally no issues with that.
Error: InvalidParameter
Parameter name: index
P.s : the site is like a very basic "Hello world" kind of site, this is the first time I am using and deploying to azure too.
I created a new project as a "Blank Azure Node.js web application", and replaced the resulting package.json and .js files with what I had before, and it publishes fine now
All was working fine for and suddenly got the error! I pretty sure it something in the project as it's now happening on vs2013 and vs2015 on different computers.
Its something to do with Templates after a lot of searching. For me Azure TFS CI got things working again if possible for you?
I had this issue with some projects but not with others, all created in a similar way. So I went thought every change and every setting I could until eventually i worked it out. I didn't want to give up and just remake them.
Basically its file paths, the first thing you notice is that it errors very quickly compared to a usual publish, the first thing that is triggered is a build but unlike heavy framework languages there not really much to actually build.
Like all builds for VS it pops out a bin folder take not of where this appears. This is the key, you want this to appear in the root of your deployment usually at the same level as the publish profile.
Before I moved my projects to VS, TFS and Azure, I used to use git and used the azure push and deployment as part of git, so I instinctively structured my folders in the similar fashion with src folder and all the extra VS baggage in the a directory higher.
This is where I noticed bin folder, so re-structured my solution and made changes to .njsproj (notepad) and moved to be inline with source code and re-added it yo my solution.
Technically speaking this a bug within VS as it allows to create the project and specify different locations which is all fine unless you want to build and publish locally.
Once you get your head around what is going on you should be able to solve this problem easily and not make the same mistake in the future. If anyone is still confused comment and ill grab some screen shots.
I'm getting this list of errors*(C:\a\src\Allegro Web.nuget\nuget.targets (88): Unable to find version '2.0.1.0' of package...*) all of a sudden after doing a normal commit, please find below, however i didnt change any nuget specific configuration recently.
It was an intermittent issue with Nuget which is fixed now.
More details on that here: https://twitter.com/nuget
The following issue just crept up on me. The steps mentioned below had worked just fine until about 2 days ago.
When I deploy a update to a solution (of web parts) to a SharePoint 2010 server I don't see the update. The solution does get installed, but from what I can tell the installed web parts are over a month old (nothing new is installed).
I do the following steps through PowerShell:
retract the solution from the web app
remove the solution
add the solution
install the solution to the web app
I have tried restarting the Web App, restarting IIS and also restarting the server. Nothing seems to work.
I notice that after I remove the solution it does get removed from the GAC. After I add/install it the solution does reappears in the GAC.
Am I missing something? Am I overlooking a step that I should be doing? Something to try?
I never deactivated/reactivated the Feature.
After following the same steps I mentioned in my question I just deactivated, then reactivated, the Feature and everything started to working fine.
This is an easy thing to I can start to implement with my solution updates. However, why did I never have to do this step before?
In general, you should check your ULS log to see which version of your solution is running. If you see the old one, then you can be sure that your activated site feature is still bound to the old version. In this case you have to Inactivate the site feature indeed to loose that tie and then Activate to bind to the new one (it appears Activate always ties the site feature to the newest version of the solution).
Maybe you had not to do this earlier, because you did not change the version number of your solution, appearing as the same version in GAC on the server. In this case you had your site feature already pointing to the correct version of your solution, therefore didn't have to reset the feature.
You have probably checked, but just in case. Make sure that the powershell script is not adding a month old package.
Is the problem in the web part code or the configuration? The configuration usually unghosts itself sooner or later and refuses to update from the solution - you can update the file in the gallery manually if anything has changed there. For most updates there won't be any changes because existing web parts won't get updates applied anyway - they will use new code but old configuration.
If the problem is the code itself, does the assembly appear to the system to be unchanged? All the hardcoded full name references in SharePoint config files mean that usually you are deploying a new assembly but with the same version numbers. This can mean that the system doesn't bother making the update. I have found it very useful to update AssemblyFileVersion (which does not affect binding) on every build and have a page in _layouts that displays the file versions of all the loaded assemblies so I know exactly what is running.
I have written a sequential workflow in SharePoint on our development environment. After testing, we decided to deploy this workflow as a feature on the staging environment. We did the following:
copied the strongly named assembly to the GAC using gacutil
copied feature.xml and workflow.xml to WebServerExtensions/12/templates/features/someFolder
installed feature (stsadm command)
activated feature (stsadm command)
All worked exactly as planned and the workflow behaved correctly. The problem was, we decided to change something in the code (a message was not very self explanatory), so on the development machine we updated the message as requested and rebuilt the project.
The problem is, we cannot seem to find a way to correctly get rid of the previous version of this workflow/feature.
To deploy the upgrade, we:
deactivated and uninstalled the feature (stsadm commands), removed also from GAC.
increased the version of the assembly
performed steps 1 to 4 from above.
When using the workflow we are still getting the first message, we cannot find a way to get the new message to be displayed.
What are we missing?
All the workflow logic "lives" inside the code assembly you are running. This means you can delete the old version of DLL (don't change assembly version numbers, use AssemblyFileVersion instead) from the GAC and replace it with the new version.
Be aware, though, that if you have changed the workflow in the designer, running instances of the old workflow version will "freeze" and never finish. Ask your users to finish their running WF-s before you upgrade the code.
It seems that the problem was in the Workflow.xml file.
Because I incremented the AssemblyFileVersion, and only replacing the dll in GAC did not work, I checked the two xml files: Feature and Workflow to see which one did not recognize the new dll (if the case). The workflow.xml file had a reference to the old version in it. I updated that, installed and activated the feature again, and it is working perfectly now.
Thanks for your support!