I'm trying to add a button to the current record with the Client Script button definition on a script record, but for some reason it's not finding my function. I'm returning my function tryThisand there is a button on the page which I created on the script record with the function tryThis defined in the appropriate field, but the code doesn't run. Here's my script:
define (['N/currentRecord','N/search','N/record'] ,
function(currentRecord,search,record) {
function tryThis(context){
log.debug({
title: 'try this',
details: 'try this'
});
}
function pageInit(context) {
}
return {
pageInit: pageInit,
tryThis: tryThis
};
});
Nothing happens :(
Yes, the script is deployed.
How can I use this button on a client script??
This doesn't exactly answer your question directly, but I hope it may help. I tested this, and there appears to be nothing wrong with the way you've set it up - the only thing that seems to be not working is the log module, which I've come across before in client scripts.
Try running your function using a console.log() or alert() instead (both work for me).
Hopefully someone with more detailed knowledge of the N/log module's design and behavior will chip in, as the documentation seems to indicate that this should work.
At the bottom of your Client Script record in Edit mode you will find where you can easily set the button and function to call.
Related
Is there a way in nightwatch to check whether a popup window appears after each click event?
I have a problem that randomly an error message appear and I don't want to write for each click event the same callback function.
I have already tried out the after and afterEach commands in the Global.js but then the commands will only run after the whole test suite.
I also have tried it local within a test file, although it also does not cover all single click events, even though the official website writes "... while beforeEach and afterEach are ran before and after each testcase (test step)"?
Solution I'm looking for:
.waitForElementVisible('selector')
.click('selector')
.click('selector')
Solution I have come up with so far:
.waitForElementVisible('selector')
.click('selector', isPresent)
.click('selector', isPresent)
isPresent as a callback function, which does the checking and close the popup window if it appears.
Is there another way to write a function (with or without after and/or forEach), so that it will be called after each click event or after each command. Thus, I don't have to write the isPresent repetitive code?
You can insert something like this in your page object file:
var popupCommand = {
popupCheck:function(){
return this.waitForElementVisible('selector', 5000)
.click('selector', isPresent)
.click('selector', isPresent)
},
module.exports = {
commands:[popupCommand],
elements:{
firstElement: {selector: 'xpath',locateStrategy: 'xpath'},
secondElement: {selector: 'css'},
}
}
Where 'popupCommand' will be the name of your page object file, for example 'Popup'. And also you will have to insert your isPresent callback function here so you can use it.
I did my best to explain you as much as possible what and how to do that :)
you should yse .switchWindow() method.
Why don't you write your own custom command specific for that case, so that way you will avoid repetitive code?
I have a SuiteScript which is getting triggered on AfterSubmit of any Case update. It is working fine for normal updates.
But when I try to edit a Case in-line(through case search), the event is not getting triggered.
Do I need to configure anything specific to handle the in-line edit during the script deployment?
Please find the script which I am using to identify the xedit operation.
function handleSupportCaseCreateUpdateReqeust(type, form, request) {
try {
if(type == 'xedit'){
nlapiLogExecution('AUDIT', 'TFSNSIntegrator Log', 'Type of the event is :'+ type);
}
} catch (e) {
nlapiLogExecution('ERROR', 'Exception', e.message);
}
This is a simple thought, but may as well check - have you confirmed that your Deployment's Log Level is set to Audit? If not, that could be why you aren't seeing that in the execution log.
Through NetSuite Support, I figured out the issue.
The issue was with the option I selected to deploy the SuiteScript. I selected 'Edit' event to trigger the script, since we dont have a option "xedit". Actually we should not select any particular event. I just deployed it with our selecting any specific event and it started to work.
Thanks all for your replies!
I don't know when this started, but I think it happened after I did some refactoring using the IDE with renaming.
Anyway, if I attach the script through the form, they fire. However, my user event, nor client scripts fire though there is a deployment record. That deployment record uses the same script that works IF it is attached via the form custom code area.
What happened?
EDIT:
For Instance:
Trying to add a button to opportunity:
function userEventBeforeLoad(type, form, request){
var list = form.getSubList("item");
list.addButton('custpage_customconfigurebutton', 'Configure', 'clientStartConfigurator()');
}
Upload Script
Add to "Script"
Deploy:
It never fires when I "Create Opportunity"?
NONE of my user event scripts are firing
EDIT 2 (NEW SCREENS as requested
Following lines of code working for me
function userEventBeforeLoad(type, form, request) {
//nlapiLogExecution('error', 'type', type);
var list = form.getSubList("item");
list.addButton('custpage_customconfigurebutton', 'Configure',"alert('Hello World')");
}
I suspect you might have an error in your clientStartConfigurator(). To verify, you can also use the browser console on click of your button to see whether you're successfully returning from your respective function or not.
Hope this will help you.
This is probably a stupid one but I have tried all the things I can think of. I am currently getting the below error on my client side script when I try and execute it.
Error: ReferenceError acvt_serialNumber_saveRecord is not defined
On the Script record in Netsuite I have set the saveRecord function as follows:
acvt_serialNumber_saveRecord
The code in the file is:
function acvt_serialNumber_saveRecord(){
/**do stuff */
}
I have reuploaded to code to make sure the right version was in NetSuite. I have added one character to both the script fn name and the fn name on the Script record (as a shot in the dark). I have seen in the Javascript console at runtime that the correct code is in there and I can see the exact function name (I did a ctrl+f for the "undefined" function in the code in the console to make sure spelling was all the same).
NOTHING has worked. I had this code working earlier, but the changes I made were not to this function at all.
Any help is appreciated
Another thing to check is the code that you recently changed. In particular, check for a hanging comma. IE:
var someObj = {
someProp:'somevalue',
};
The comma at the end of 'somevalue' will cause the script to fail, throwing 'undefined' errors.
Have you tried deleting the Script record in NetSuite and re-creating it?
Do you have any library included for that Client Script in netsuite ?
Provide a screen shot of your Netsuite script page
I encounter similar problem like this before, but it was because i called a function which is inside a library file
Thanks
I have a problem when I developed my website with Google+ sign-in:
I did step by step that the doc told me but I always failed at step4:
https://developers.google.com/+/web/signin/
the result was always ""immediate_failed" - Could not automatially log in the user", I just don't kown why, can anyone help me, thanks very much! :-(
Note that in the sample code you pointed to, the "immediate_failed" check is commented out. This is intentional, since the first time a user encounters the Sign-in button on the page, it will fail.
The reason it fails is that when the page first loads, before the user even presses the button, a request is sent to Google to determine if the user has already logged in (via Google or another site, for example). If they are - there is no need for them to log in again, so the button never needs to be shown. But if they have not been logged in already, you will get the "immediate_failed" response, and will need to either show (or not clear) the button.
tl;dr - Don't worry aout getting immediate_failed when the page first loads. This is normal.
As a workaround I use gapi.auth.authorize method in the gapi.auth.signIn callback. Here is my code:
gapi.auth.signIn({
'callback': gPlusLoginCallback
});
function gPlusLoginCallback(authResult) {
if (authResult['status']['signed_in']) {
doSmth(authRes['access_token']);
} else if (authResult['error'] == "immediate_failed") {
gapi.auth.authorize({
client_id: gplusClientId,
scope: 'https://www.googleapis.com/auth/plus.login email',
immediate: true
}, function (authRes) {
if (authRes['status']['signed_in']) {
doSmth(authRes['access_token']);
}
});
}
}
function doSmth(accessToken){
//Do smth
}
Change this setting "immediate: true", to be false " immediate: false".
But if you like to make more complex implementation look at the first sample here https://developers.google.com/api-client-library/javascript/start/start-js. You have to calls to Google's "gapi.auth.authorize({...", the first one with "immediate: true", and the second one with "immediate: false".
The question is old but I faced this issue recently.
In my case, it was because I specified the URI parameter prompt to none. I guess Google doesn't like that if the user has never been logged to your platform before.
Whenever I changed that to consent or totally removed it, it worked great.
In my case, the error was because of explicitly specifying the authorization parameter prompt to 'none',similar to a previous answer.
It worked for me by specifying prompt=None or as per the official docs,you may skip this parameter.