I'm trying to use Excle's SUMIF to calculate totals of Col1 to Col5 for dates that are similar.
My formula is as follows =SUMIF($A2:$A7,A10,$B2:$F7), but this only gives me the total of a single column.
How can I get the Totals of all the columns based on the date like I've shown in my results.
Date Col 1 Col 2 Col 3 Col 4 Col 5
1/5/2017 1 2 2
1/5/2017 5 3 1
1/5/2017 9 5 5
2/5/2017 10 5 3
2/5/2017 20 10 3
2/5/2017 6 8 1 5
Desired Results
1/5/2017 15 7 7 3 1
2/5/2017 30 11 11 11 8
use below formula in cell B11
=SUMIF($A$2:$A$7,$A11,B$2:B$7)
Per the example you provided, One solution is to use SUMPRODUCT
Multiplies corresponding components in the given arrays, and returns the sum of those products
Microsoft Docs give a thorough example, but per SO etiquette, here is an example in case of link-rot: [FYI, I used absolute reference for easier filling across, arbitrary how you get it done though]
Forumlas shown:
Formula is kind of hard to see without clicking on image:
=SUMPRODUCT(($B$3:$B$8=$B$11)*C3:C8)
This basically breaks down like this, it searches the B:B column for a match, and it will naturally return a true or false for the match, or 0/1 counterparts, and multiplys that by the number found in the column to the right (C3:C8), so it will either be 1 * # = # or 0 * # = 0
Related
End-goal: A column with the subtotals of groups (defined in the below table as all foods listed above Zucchini, incl Zucchini).
Current attempt: create a column to define groups using COUNTIF('count all 'zucchini' thus far'). Then use SUMIF to get the total cost for the current group.
Problem: I don't know how to do this without the COUNTIF column (since SUMIF needs range C:C to be resolved first). I'd like to have it in a single formula. I looked into array formulas but not sure if/how to apply that here.
FOOD COST COUNTIF(A2:A$2;"Zucchini") SUMIF(C:C;C2;B:B)
Apple 3 0 12
Pecan 7 0 12
Zucchini 2 0 12
Apple 4 1 23
Olive 8 1 23
Pecan 6 1 23
Zucchini 5 1 23
Apple 4 2 16
Olive 9 2 16
Zucchini 3 2 16
Any ideas on how to solve either the current problem or the end-goal problem? Thanks!
Put this in C2 and copy down:
=IF(A2="Zucchini",SUM($B$1:B2)-SUM($C$1:C1),"")
It basically sums everything to the row and subtracts what is already accounted for.
I have a table array that looks like this:
A B
1 2
1 3
1 9
2 3
2 4
2 11
2 23
2 56
3 7
4 13
My VLOOKUP formula is to check for 1 in column A and then return the corresponding B value. Is there anyway I can get all the values for 1? Currently it just returns back the last corresponding number for 1 i.e. 9 in column B.
You can Pivot that data, or you can try INDEX and MATCH together, perhaps even an IF command with it.
I am trying to work the (First Contact Resolution) FCR in excel however so success.
Does anyone know an automated formula used in excel?
We have been trying to use formulas to check how many times a customer with the same customer ID calls us in 7 days.
Assuming your requirement
ID Date Calls Count in last 7 days from today
1 13-Mar-17 2
2 14-Mar-17 0
5 15-Mar-17 1
1 16-Mar-17 2
3 17-Mar-17 1
5 18-Mar-17 1
7 19-Mar-17 1
9 20-Mar-17 1
1 21-Mar-17 2
13 22-Mar-17 1
2 23-Mar-17 0
17 24-Mar-17 0
5 25-Mar-17 1
21 26-Mar-17 0
Putting ID in Column A and Dates in Column B and records starts from row 2
put this formula in Cell "C2":
=COUNTIFS(A:A,A2,B:B,">="&TODAY()-6,B:B,"<="&TODAY())
and drag it all way down to see the number of calls
or put this formula if you want to calculate last 7 days from the date in sheet:
=COUNTIFS(A:A,A2,B:B,">="&B2-6,B:B,"<="&B2)
Please let me know if you meant something else as I tried my best to assume the senario.
I'm looking for a way to compare multiple rows with data to each other, trying to find the best possible match. Each number in every column must be an approximately match the other numbers in the same column.
Example:
Customer #1: 1 5 10 9 7 7 8 2 3
Customer #2: 10 5 9 3 5 7 4 3 2
Customer #3: 1 4 10 9 8 7 6 2 2
Customer #4: 9 5 6 7 2 1 10 5 6
In this example customer #1 and #3 is quite similar, and I need to find a way to highlight or sort the rows so I can easily find the best match.
I've tried using conditional formatting to highlight the numbers that are the similar, but that is quite confusing, because the amount of data is quite big.
Any ideas of how I could solve this?
Thanks!
The following formula entered in (say) L1 and pulled down gives the best match with the current row based on the sum of the absolute differences between corresponding cells:-
=MIN(IF(ROW($C$1:$K$4)<>ROW(),(MMULT(ABS($C1:$K1-$C$1:$K$4),TRANSPOSE(COLUMN($C$1:$K$4))^0))))
It is an array formula and must be entered with CtrlShiftEnter.
You can then sort on column L to bring the customers with lowest similarity scores to the top or use conditional formatting to highlight rows with a certain similarity value.
EDIT
If you wanted to penalise large differences in individual columns more heavily than small differences to try and avoid pairs of customers which are fairly similar except for having some columns very different, you could try something like the square of the differences:-
=MIN(IF(ROW($C$1:$K$4)<>ROW(),(MMULT(($C1:$K1-$C$1:$K$4)^2,TRANSPOSE(COLUMN($C$1:$K$4))^0))))
then the scores for your test data would come out as 7,127,7,127.
I'm assuming you want to compare customers 2-4 with customer 1 and that you are comparing only within each column. In this case, you could implement a 'scoring system' using multiple IFs. For example,:
A B C D E
1 Customer 1 1 1 2
2 Customer 2 1 2 2
3 Customer 3 0 1 0
you could use in E2
=if(B2=$B$1,1,0)+if(C2=$C$1,1,0)+if(D2=$D$1,1,0)
This will return a 'score' of 1 when you have a match and a 'score' of 0 when you don't. It then adds up the scores and your highest value will be your best match. Copying down would then give
A B C D E
1 Customer 1 1 1 2
2 Customer 2 1 2 2 2
3 Customer 3 0 1 0 1
so customer 2 is the best match.
I'm looking for a way to find the first specific value above a certain cell.
Using the example below, in the result column every time I hit a A in COL2, I need to substract the value in COL1 to the first A value above.
The trouble seems finding a way to keep the range dynamic...
I thought of =IF(B5="A";A5-INDIRECT("A"&MATCH("A";B:B;0));"")
But of course that only works for the first one as Match will always pick up the first one.
Any ideas? Thanks!
Example :
COL1 COL2 Result
1 A
2 0
3 0
4 A 4 - 1 = 3
5 0
6 A 6 - 4 = 2
7 0
8 0
9 0
10 A 10 - 6 = 4
Try this:
=IF(AND(ROW(B2)<>2,B2="A"),A2-INDEX($A$1:$A1,AGGREGATE(14,6,ROW($1:1)/($B$1:$B1="A"),1)),"")
The AGGREGATE() Function was introduced in 2010.
In D2 enter =IF(B2="A",A2-INDIRECT("A"&MATCH("A"&(E2-1),F:F,0)),"")
In E2 enter =IF(B2="a",COUNTIFS($B$2:B2,"a"),"")
In F2 enter =B2&E2
Copy formulas from D, E and F down all your rows
Column D is the result you're looking for