I have a table array that looks like this:
A B
1 2
1 3
1 9
2 3
2 4
2 11
2 23
2 56
3 7
4 13
My VLOOKUP formula is to check for 1 in column A and then return the corresponding B value. Is there anyway I can get all the values for 1? Currently it just returns back the last corresponding number for 1 i.e. 9 in column B.
You can Pivot that data, or you can try INDEX and MATCH together, perhaps even an IF command with it.
Related
I have a table with many values as such (this is an oversimplified example):
IDx
Namex
Pricex
1
a
5
2
b
2
1
a2
5
3
c
3
2
b2
9
and another table with only the ID, in which I'd like to add a column that shows the addition of all the values that match that ID, in this example:
IDy
Totaly
1
10
2
11
3
3
I'm guessing this is a combination of vlookup with sum or sumif, I've tried so far:
=SUM(VLOOKUP(IDy1,$IDx$1:$IDx$5,$Pricex$1:$Pricex$5),// don't know how to proceed here
Try this:
B5:B9 = IDx
B16,D5 = Price
=SUMIF(B$5:B$9,B16,D$5:D$9)
May be this is the duplicate of other question but I am not able to solve the problem.
I have transaction data having 100 features and 2.3 million rows. I want to find percentage of values present in one column and Null in other column for every combination of columns.
Example:
A B C D
1 NA 2 3
2 4 5 6
NA 5 6 7
8 2 NA NA
9 8 7 6
So output should be:
When A has values B has Null 1/4=0.25 times
When A has values C has Null 1/4=0.25 times
Similarly for every other combination of columns and create a dataframe for it.
I tried combination of columns function in Python but it's not giving the desired result.
itertools.combinations(daf.columns, n)
You can write 2 for loops to iterate for individual columns and then compare.
I'm trying to use Excle's SUMIF to calculate totals of Col1 to Col5 for dates that are similar.
My formula is as follows =SUMIF($A2:$A7,A10,$B2:$F7), but this only gives me the total of a single column.
How can I get the Totals of all the columns based on the date like I've shown in my results.
Date Col 1 Col 2 Col 3 Col 4 Col 5
1/5/2017 1 2 2
1/5/2017 5 3 1
1/5/2017 9 5 5
2/5/2017 10 5 3
2/5/2017 20 10 3
2/5/2017 6 8 1 5
Desired Results
1/5/2017 15 7 7 3 1
2/5/2017 30 11 11 11 8
use below formula in cell B11
=SUMIF($A$2:$A$7,$A11,B$2:B$7)
Per the example you provided, One solution is to use SUMPRODUCT
Multiplies corresponding components in the given arrays, and returns the sum of those products
Microsoft Docs give a thorough example, but per SO etiquette, here is an example in case of link-rot: [FYI, I used absolute reference for easier filling across, arbitrary how you get it done though]
Forumlas shown:
Formula is kind of hard to see without clicking on image:
=SUMPRODUCT(($B$3:$B$8=$B$11)*C3:C8)
This basically breaks down like this, it searches the B:B column for a match, and it will naturally return a true or false for the match, or 0/1 counterparts, and multiplys that by the number found in the column to the right (C3:C8), so it will either be 1 * # = # or 0 * # = 0
I'm looking for a way to compare multiple rows with data to each other, trying to find the best possible match. Each number in every column must be an approximately match the other numbers in the same column.
Example:
Customer #1: 1 5 10 9 7 7 8 2 3
Customer #2: 10 5 9 3 5 7 4 3 2
Customer #3: 1 4 10 9 8 7 6 2 2
Customer #4: 9 5 6 7 2 1 10 5 6
In this example customer #1 and #3 is quite similar, and I need to find a way to highlight or sort the rows so I can easily find the best match.
I've tried using conditional formatting to highlight the numbers that are the similar, but that is quite confusing, because the amount of data is quite big.
Any ideas of how I could solve this?
Thanks!
The following formula entered in (say) L1 and pulled down gives the best match with the current row based on the sum of the absolute differences between corresponding cells:-
=MIN(IF(ROW($C$1:$K$4)<>ROW(),(MMULT(ABS($C1:$K1-$C$1:$K$4),TRANSPOSE(COLUMN($C$1:$K$4))^0))))
It is an array formula and must be entered with CtrlShiftEnter.
You can then sort on column L to bring the customers with lowest similarity scores to the top or use conditional formatting to highlight rows with a certain similarity value.
EDIT
If you wanted to penalise large differences in individual columns more heavily than small differences to try and avoid pairs of customers which are fairly similar except for having some columns very different, you could try something like the square of the differences:-
=MIN(IF(ROW($C$1:$K$4)<>ROW(),(MMULT(($C1:$K1-$C$1:$K$4)^2,TRANSPOSE(COLUMN($C$1:$K$4))^0))))
then the scores for your test data would come out as 7,127,7,127.
I'm assuming you want to compare customers 2-4 with customer 1 and that you are comparing only within each column. In this case, you could implement a 'scoring system' using multiple IFs. For example,:
A B C D E
1 Customer 1 1 1 2
2 Customer 2 1 2 2
3 Customer 3 0 1 0
you could use in E2
=if(B2=$B$1,1,0)+if(C2=$C$1,1,0)+if(D2=$D$1,1,0)
This will return a 'score' of 1 when you have a match and a 'score' of 0 when you don't. It then adds up the scores and your highest value will be your best match. Copying down would then give
A B C D E
1 Customer 1 1 1 2
2 Customer 2 1 2 2 2
3 Customer 3 0 1 0 1
so customer 2 is the best match.
In EXCEL sheet I have 1728 rows and 2 columns (L and O). I am doing addition of these 2 columns in column P. Further I want to count the occurrence in this column if addition is EQUAL to 2 or 4 or 6 or 8 BUT condition here is that The COUNT should be such that BOTH the columns L and O are EQUAL and Their addition is either 2 or 4 or 6 or 8.
This means that only the columns in L and O with values "1+1" , "2+2", "3+3", "4+4" should be counted. The addition of "1+3", "4+2" should not be counted.
=COUNTIF(P:P,4)
does not work.
L O P M
===========================
1 1 2 1 (NO OF 2'S)
2 2 4 1 (NO OF 4'S)
3 3 6 1 (NO OF 6'S)
1 3 4* NO TO BE COUNTED
4 4 8 1 (NO OF 8'S)
2 4 6* NOT TO BE COUNTED
4 2 6*
AS SEEN ABOVE RESULT OF COUNTING IS STORED IN M. Let me know the formula
=IF(L29=M29,SUMPRODUCT(--($L$29:$L$35=$M$29:$M$35)*(L29=$L$29:$L$35)),"Not Counted")
My data started in row 29 so you will need to adjust the references. It counts the entire table in 1 shot. So if you added a row to the bottom that had 1 and 1 and 2, the results in column M in your first row would become 2 and the same for the row you just added.
Will this formula help...?
=IF(AND(A1=B1,OR(SUM(A1,B1)=2,SUM(A1,B1)=4,SUM(A1,B1)=6,SUM(A1,B1)=8)),SUM(A1,B1),"NOT TO BE COUNTED")
Just drag the formula till you have data. You will need to adjust the references.
Here is the reference data.