I have a server running tomcat. I can view the website fine on the same lan network but when I try the external IP it doesn't work. I port forwarded 8080, 8009 and 8005 tcp and udp. (I know the ports are forwarded because I used the same rule as my website that uses port 80 which works). The external firewall says that the connection is timing out, meaning the server is not replying. My connector in tomcat is the following:
<Connector port="8080" protocol="HTTP/1.1"
connectionTimeout="20000"
redirectPort="8443"
useIPVHosts="true"
address="0.0.0.0" />
Do you know why I am not able to see the website on my external IP? It has to be an application issue since port 80 works on my website and i am using the same rule to forward 8080. Any help would be greatly appreciated.
Related
I have a NodeJs/Express project in Alibaba cloud based Ubuntu server.
When I run project and access with curl localhost:3000 and curl 127.0.0.1:3000 it works!
When I access with IP public, e.g. curl 192.x.x.x:3000 it doesn't work, even though I have edited config in Express project in some code to : server.listen(3000,"0.0.0.0") OR server.listen("3000","192.x.x.x").
FYI I have Apache on this server. When I access on Internet with IP public no problem.
What can I do to solve this problem? Thanks beforehand.
PS: the 192.x.x.x is my IP public and it works access with Apache project
Issue the following command to open port 3000 for TCP traffic.
sudo ufw allow 3000/tcp
You have to configure your security ground and create a inbound rule to allow port 3000. Follow this guideline.
https://www.alibabacloud.com/help/doc-detail/25471.htm
Make sure you allow TCP traffic or all traffic from all sources to the port 3000 as the inbound rule.
The fact that you can access your service locally - but not publicly could mean 2 possible configurations:
The server running your application has blocked the port 3000
You have not configured your server to map the port 80 of a specific route to the port 3000
It is highly possible that a most essential part of your server configuration has not been done.
I have installed mirthconnect on windows virtual machine in azure resource manager. I am able to access admin console with http://localhost:8080 .But same is not accessible from internet. I have added endpoints in network security.
Is there any other configuration I am missing here ?
I am able to RDP to the machine . I have tried with source as * and destination as * also . But still no luck.
I am not able to telnet also with the VM public IP and the given ports.
Connect to your Virtual Machine, Open the Firewall Advanced Settings and add an exception for the port 8080 as the EndPoint Configuration doesn't do that for you
Did you allow 8080/TCP from anywhere, for all profiles in Windows Firewall?
Is you daemon listening on 0.0.0.0 or just 127.0.0.1?
netstat -ban
should give you the answer there.
e.g.
[spoolsv.exe]
TCP 0.0.0.0:1540 0.0.0.0:0 LISTENING
[lsass.exe]
TCP 0.0.0.0:2179 0.0.0.0:0 LISTENING
[vmms.exe]
TCP 0.0.0.0:5357 0.0.0.0:0 LISTENING
If you're only listening on localhost (127.0.0.1) you need to address the configuration of your daemon and then restart it.
I have website working fine on my local machine as host name hml.frontend in the hosts file: 127.0.0.1 hml.frontend
In IIS I have bindings as hml.frontend 127.0.0.1 and hml.frontend 192.168.1.94. The latter I used ipconfig to get my local ip address issued to me by my BT Home Hub 5 router.
In windows 10 firewall I have allowed App/Feature NetLogon service and World Wide Web services (HTTP).
In advanced settings in Inbound Rules I have added a rule which allow the connection from all sources to ports 80 and 443. Scope is any IP addresses.
On my macbook I have added the 192.168.1.94 as hml.frontend to the hosts file.
I can ping hml.frontend OK from the macbook.
However from a web browser the http://hml.frontend site cannot be reached from the macbook.
telnet 192.168.1.94 80 from the macbook says unable to connect to remote host.
Back on the PC I have done netstat -na to see which ports IIS is listening on and 127.0.0.1:80 is there and so is 192.168.1.94:139 and many more ports against that IP address but not port 80.
Any ideas what I can check to get my PC to listen for that website hostname on port 80?
I got it to work, I was on the right track that the IP address was not being listened to.
In order to add the ip address I have to be listened to, I went into cmd as adminstrator, did
netsh
http
show iplisten
'show' result shows that just 127.0.0.1 was being listened on port 80
add iplisten ipaddress=192.168.1.94
show iplisten
quit
'show' result shows that now additionally 192.168.1.94 is being listened on port 80
Then I went back in with
netstat -na
And now I see the line I want:
TCP 192.168.1.94:80 0.0.0.0:0 LISTENING
Some information was gained from this article.
http://windowsitpro.com/windows-server/solve-iis-listener-problems
The site is now reachable from my macbook using the hostname http://hml.frontend
we have IIS 7.5 on server machine.
All websites can be access locally (80 and 8081 port as well)
However, only port 80 website can be accessed remotely. But the website on 8081 cannot be accessed remotely.
What is wrong?
That is because you have firewall turned on for non standard ports (even if HTTP protocol is used and HTTP is enabled in firewall app/feature settings because it defaults to port 80).
To enable remote port 8018 access: under firewall.cpl -> Advanced settings -> Inbound rules add new rule for port 8081, TCP
My server has jboss on port 8080,
Now I wants Tomcat too,
In tomcat 7.0.34 i had made the following changes
<Connector port="8010" protocol="HTTP/1.1"
redirectPort="8443" />
Now while I accessing the application from server local host it works fine..
But I was not able to access from Client side
Note:I had open the port 8010 from server amazon ec2
Make sure the Windows firewall service is started. If this is disabled, you will have issues.
Next, go to Control Panels and edit the firewall settings to allow port 8010 and 8443. Test this by using Telnet 127.0.0.1 8010 and port 8443.