I have a pre-trained model, by changing final fc layers I have created model for downstream task. Now, I want to load weights from pertained weights. I tried self.model.load_from_checkpoint (self.pretrained_model_path). But, when I print weight values from model layers, they are exactly same which indicates weights were not loaded/updated. Note that is not giving me any warning/error.
Edit:
self.model.backbone = self.model.load_from_checkpoint (self.pretrained_model_path).backbone
updates the parameters with pre_trained weights. There might be optimal way but I found this fix.
How can I use the weights of a pre-trained network in my tensorflow project?
I know some theory information about this but no information about coding in tensorflow.
As been pointed out by #Matias Valdenegro in the comments, your first question does not make sense. For your second question however, there are multiple ways to do so. The term that you're searching for is Transfer Learning (TL). TL means transferring the "knowledge" (basically it's just the weights) from a pre-trained model into your model. Now there are several types of TL.
1) You transfer the entire weights from a pre-trained model into your model and use that as a starting point to train your network.
This is done in a situation where you now have extra data to train your model but you don't want to start over the training again. Therefore you just load the weights from your previous model and resume the training.
2) You transfer only some of the weights from a pre-trained model into your new model.
This is done in a situation where you have a model trained to classify between, say, 5 classes of objects. Now, you want to add/remove a class. You don't have to re-train the whole network from the start if the new class that you're adding has somewhat similar features with (an) existing class(es). Therefore, you build another model with the same exact architecture as your previous model except the fully-connected layers where now you have different output size. In this case, you'll want to load the weights of the convolutional layers from the previous model and freeze them while only re-train the fully-connected layers.
To perform these in Tensorflow,
1) The first type of TL can be performed by creating a model with the same exact architecture as the previous model and simply loading the model using tf.train.Saver().restore() module and continue the training.
2) The second type of TL can be performed by creating a model with the same exact architecture for the parts where you want to retain the weights and then specify the name of the weights in which you want to load from the previous pre-trained weights. You can use the parameter "trainable=False" to prevent Tensorflow from updating them.
I hope this helps.
Yesterday night I let a neural network model training and that took time, so I thought to add a statement to save weights model.save_weights('first_try.h5')
Now as I had the file, I want to benefit saved file.
Prediction is like
pred=model.predict_generator(test_generator, steps=4124, verbose=1)
If you saved your model's weights you can load using load_weights method. But first you have to define your model structure.
e.g.
model = method_to_create_the_model()
model.load_weights("path_to_weight_file")
I have 10 class dataset with this I got 85% accuracy, got the same accuracy on a saved model.
now I want to add a new class, how to add a new class To the saved model.
I tried by deleting the last layer and train but model get overfit and in prediction every Images show same result (newly added class).
This is what I did
model.pop()
base_model_layers = model.output
pred = Dense(11, activation='softmax')(base_model_layers)
model = Model(inputs=model.input, outputs=pred)
# compile and fit step
I have trained model with 10 class I want to load the model train with class 11 data and give predictions.
Using the model.pop() method and then the Keras Model() API will lead you to an error. The Model() API does not have the .pop() method, so if you want to re-train your model more than once you will have this error.
But the error only occurs if you, after the re-training, save the model and use the new saved model in the next re-training.
Another very wrong and used approach is to use the model.layers.pop(). This time the problem is that function only removes the last layer in the copy it returns. So, the model still has the layer, and just the method's return does not have the layer.
I recommend the following solution:
Admitting you have your already trained model saved in the model variable, something like:
model = load_my_trained_model_function()
# creating a new model
model_2 = Sequential()
# getting all the layers except the output one
for layer in model.layers[:-1]: # just exclude last layer from copying
model_2.add(layer)
# prevent the already trained layers from being trained again
# (you can use layers[:-n] to only freeze the model layers until the nth layer)
for layer in model_2.layers:
layer.trainable = False
# adding the new output layer, the name parameter is important
# otherwise, you will add a Dense_1 named layer, that normally already exists, leading to an error
model_2.add(Dense(num_neurons_you_want, name='new_Dense', activation='softmax'))
Now you should specify the compile and fit methods to train your model and it's done:
model_2.compile(loss='categorical_crossentropy',
optimizer='adam',
metrics=['accuracy'])
# model.fit trains the model
model_history = model_2.fit(x_train, y_train,
batch_size=batch_size,
epochs=epochs,
verbose=1,
validation_split=0.1)
EDIT:
Note that by adding a new output layer we do not have the weights and biases adjusted in the last training.
Thereby we lost pretty much everything from the previous training.
We need to save the weights and biases of the output layer of the previous training, and then we must add them to the new output layer.
We also must think if we should let all the layers train or not, or even if we should allow the training of only some intercalated layers.
To get the weights and biases from the output layer using Keras we can use the following method:
# weights_training[0] = layer weights
# weights_training[1] = layer biases
weights_training = model.layers[-1].get_weights()
Now you should specify the weights for the new output layer. You can use, for example, the mean of the weights for the weights of the new classes. It's up to you.
To set the weights and biases of the new output layer using Keras we can use the following method:
model_2.layers[-1].set_weights(weights_re_training)
model.pop()
base_model_layers = model.output
pred = Dense(11, activation='softmax')(base_model_layers)
model = Model(inputs=model.input, outputs=pred)
Freeze the first layers, before train it
for layer in model.layers[:-2]:
layer.trainable = False
I am assuming that the problem is singlelabel-multiclass classification i.e. a sample will belong to only 1 of the 11 classes.
This answer will be completely based on implementing the way humans learn into machines. Hence, this will not provide you with a proper code of how to do that but it will tell you what to do and you will be able to easily implement it in keras.
How does a human child learn when you teach him new things? At first, we ask him to forget the old and learn the new. This does not actually mean that the old learning is useless but it means that for the time while he is learning the new, the old knowledge should not interfere as it will confuse the brain. So, the child will only learn the new for sometime.
But the problem here is, things are related. Suppose, the child learned C programming language and then learned compilers. There is a relation between compilers and programming language. The child cannot master computer science if he learns these subjects separately, right? At this point we introduce the term 'intelligence'.
The kid who understands that there is a relation between the things he learned before and the things he learned now is 'intelligent'. And the kid who finds the actual relation between the two things is 'smart'. (Going deep into this is off-topic)
What I am trying to say is:
Make the model learn the new class separately.
And then, make the model find a relation between the previously learned classes and the new class.
To do this, you need to train two different models:
The model which learns to classify on the new class: this model will be a binary classifier. It predicts a 1 if the sample belongs to class 11 and 0 if it doesn't. Now, you already have the training data for samples belonging to class 11 but you might not have data for the samples which doesn't belong to class 11. For this, you can randomly select samples which belong to classes 1 to 10. But note that the ratio of samples belonging to class 11 to that not belonging to class 11 must be 1:1 in order to train the model properly. That means, 50% of the samples must belong to class 11.
Now, you have two separate models: the one which predicts class 1-10 and one which predicts class 11. Now, concatenate the outputs of (the 2nd last layers) these two models with a newly created Dense layer with 11 nodes and let the whole model retrain itself adjusting the weights of pretrained two models and learning new weights of the dense layer. Keep the learning rate low.
The final model is the third model which is a combination of two models (without last Dense layer) + a new Dense layer.
Thank you..
When we build and train a model in keras, do we need to initialize the weight of the layers? It seems people don't do it when they build the Sequential() models.
Also, if I do model.fit two times, what's the initial value of weight for the second time? is it the training result from the first run?
Layers are initialized when they are built, you don't need to do anything for that to happen.
If you fit two times in a row, you start from the weights trained in the first call to fit. Weights are not reinitialized in between.