I recently done some updates and added some packages based on recommendations from meteor
you know the usual If you notice problems related to these missing modules, consider running: meteor npm install ...
Problem now is that I get errors relating to the following
when I click to see which line is causing the issue, it's from var EJSON = Package.ejson.EJSON;
I don't know what this is therefore I am assuming I never messed with it during development.
any insight would be appreciated ...
EDIT: I went back through my commands, this issue started when I added meteor add ecmascript (solved one problem to open up another :))
Also as requested .meteor/packages
# Meteor packages used by this project, one per line.
# Check this file (and the other files in this directory) into your repository.
#
# 'meteor add' and 'meteor remove' will edit this file for you,
# but you can also edit it by hand.
autopublish#1.0.7
less#2.7.11
twbs:bootstrap#3.3.6
fortawesome:fontawesome
jquery#1.11.10
okgrow:router-autoscroll
meteor-base#1.3.0
mobile-experience#1.0.5
mongo#1.4.2
blaze-html-templates#1.0.4
session#1.1.7
tracker#1.1.3
logging#1.1.19
reload#1.2.0
random#1.1.0
ejson#1.1.0
spacebars#1.0.12
check#1.3.0
standard-minifier-css#1.4.0
standard-minifier-js#2.3.1
shell-server#0.3.1
kadira:flow-router
kadira:blaze-layout
zimme:active-route
accounts-ui#1.3.0
accounts-password#1.5.0
dynamic-import#0.3.0
http#1.4.0
percolate:synced-cron
matb33:collection-hooks
reactive-var
ecmascript
Related
I have a project in Angular 13. I want to use quillJS and I want to add tables so I tried to install quill-better-table in my project.
For some reason the package is not working. I used the web inspector and found this to be the issue:
ERROR TypeError: quill.keyboard.bindings.Backspace is undefined
The problem seems to be located at: quill_better_table_BetterTable quill-better-table.js:2979 and when I check the debugger I can see the line:
let thisBinding = quill.keyboard.bindings['Backspace'].pop();
quill.keyboard.bindings['Backspace'].splice(0, 1, thisBinding); // add Matchers to match and render quill-better-table for initialization
// or pasting
I found a github repo that had this issue fixed:
https://github.com/LosEcher/quill-better-table
The problem I'm running into is I dont know how to get that particular repo into my project. I have tried updating the current package and webpack continues to load the old one. I've tried clearing the npm cache and reinstalling the node packages.
I found this guide: https://whatapalaver.co.uk/npm-dependency which seems to indicate what I should do but I'm not quite npm literate enough to figure it out. Specifically, I dont know that I understand how to create the NPM link.
I'm looking for advice as to how to fix this package. I am going to be reading up on NPM link but I figured if there was another easier way to get this fixed then I would ask. I can load that repo into my node module folder, but I dont know how to make webpack reload the updated module.
Thanks in advance for the help, let me know what details I for got to add.
I am working on an application via the toolchain tool on IBM Cloud and editing the code via the Eclipse Orion IDE. As I am not accessing this through my local cli, my understanding is that in order to so call npm install {package}, I would just need to include the package in the package.json file under dependencies and require it in my app. However, when I load the application, I get the require is not defined indicating that the package has not been installed. Moreover, the require() is being used in the app.js file with the application being launched but not from files in my public directory.
After playing around further, it seems it might have to do with the way the directory tree is being traced as the error is only thrown in subdirectories. For example, require('express') works in app.js which is in the main directory ./ but fails when it is called in test.js in ./subdirectory/test.js. I feel like I'm missing something painfully simple like configuration of endpoint or something.
I've been searching around but I can't seem to find how to get the packages loaded, preferably without using the cli. Appreciate any pointers. Thanks!
Update: After playing around further, I am also getting module is not defined error when trying to require from another file in the same directory. For example module.exports = 'str' returns this error. While trying to require('./file') returns the require is not defined. It might have to do with how node is wrapping the functions?
Update 2: Tried "start": "npm install && node app.js" in package.json but no luck. Adding a build stage which calls npm install before deployment also does not work
Update 3: After adding npm install build stage, I am able to see that the dependencies have been successfully built via the logs. However, the require is not defined error still persists.
Update 4: Trying npm install from my CLI doesn't work as well even though all packages and dependencies are present
Update 5: Running cf restage or configuring cache via cacheDirectories does not work as well
Opened a related question regarding deployment here
Found out my confusion was caused due to me not realizing that require() cannot be used on the client side unless via tools such as Browserify.
I'm working on updating my project from using electron version 1.2.5
to the newest electron at this time which is 1.7.7 (atleast it was when I downloaded it). My node version 6.9.1.
I've encountered a problem when I start my project with this new electron version,
the error in general is about "could not locate the binding files. and it mostly regards the async module.
There is also some part of the exception regarding node-etcd module which I use in my project (version 5.0.3)
I found some information about this type of exception online but most of them says stuffs about rebuilding some node module using some npm commands which I didn't quiet understand. I tried to install async module again in a new folder and replace it (with its deps) in the node modules folder im currently using for my project, but I still got the same error.
I'm working in an offline enviorment where I can't take my project "out" to a computer with internet access, I can only bring things from the web to my project (like installing in some folder and then copying that into my project) so any npm or other commands that require web connection are not available to me directly on my work computer. (I can only use them in a different computer and copy the results to a flash drive and bring them to th
Here's 2 pictures of the error (sorry about the quality, its the best I could get):
First part of error
Second part of error
The solution that fixed the problem in my case was going into node_modules - > deasync - > index.js
Before line 31 I added a newline (next to the binding line)
and wrote:
modPath = __dirname;
This solution is hacky, it was accually ly found by an associate a while back, so I am not sure why it works, it might be an issue in deasync, but it fixed the problem.
I keep getting this issue:
[snip of my issue][1]
I'm teaching myself node and am trying to make a CRUD RESTful application in my spare time. I'm working off this book:
https://leanpub.com/mean-machine.
For the past 3 days I've been stuck with this issue. It is specifically concerning the bcrypt-node.js . It's job is to hash passwords. Some things I have tried.
Downloaded python 3.5 as I got errors saying the runtime was needed to execute.
Setting python environment variable in PATH
npm uninstall and install.
Tried creating a new project, same issues cropped up.
npm clear cache
Since it is an old version of the bcrypt-node.js module changed the version in package.json from "0.0.3" to "0.0.5". I thought it could be a bug. Unlikely as that is.
I'm very new to node.js so I feel like I'm doing something silly that I just cannot see. Also I don't understand a lot of the information the command line is providing me. Thank you in advance.
EDIT 1:
Picture of my code.
Edit. (For future visitors) I needed to pay more attention to the various dependencies and a further understanding of JS in general to utitlise the power of Node.js, which is something I didn't do. Also recommended is a good understanding of Express.
A deeper understand of the npm is needed.
I found a fix through trial and error and some googling.
In case any one looks up this again in the future I entered:
npm install node-gyp -g && npm cache clean && rm -rf node_modules && npm installinto the command line and it appeared to fix the issue when I ran nodemon server.js
Fingers crossed it does not crop up again.
If someone would like to explain to me what exactly was the problem I had I would really appreciate it. I have a feeling a module or dependency wasn't installed correctly?
EDIT 1. Furthermore configure the PATH in your environment variables.
ie I created a path for python in the command line
PATH python = C:\Python27\python.exe & another PATH for MongoDB
i.e C:\Program Files\MongoDB\Server\3.2\bin
Having issues getting swiper.js to work. Requires grunt/bower. I'm completely new to js generators and am only able to get through about half the walkthrough before running into issues.
When I type $grunt dist into terminal, I get the following response: -bash: dist: command not found
What step am I missing?
Followed the idangerous steps to the letter: http://www.idangero.us/sliders/swiper/plugins/scrollbar.php
I have most often see "X command not found" for one of the following reasons:
The project's Grunt dependencies aren't installed or aren't installed properly
Your Gruntfile is mis-configured or missing
To fix this, first make sure there is a package.json file in your project. This will tell the npm what dependencies the project has and install them accordingly (assuming the package.json file is also configured correctly).
Next, make sure you have installed grunt correctly.
If you're still having issues, open your Gruntfile and search for:
grunt.registerTask('dist
This will show where the "dist" task is being defined. If you for some reason don't find it, then there's your problem. If you do find it, then check the proceeding commands inside square brackets that look like this:
grunt.registerTask('dist', ['clean', 'dist-css', 'copy:fonts', 'dist-js', 'dist-docs']);
'clean', 'dist-css', etc. are all other tasks defined in the Gruntfile, and there could be an issue with those as well.
If there's an issue with your package.json or Gruntfile, then trying re-installing the project with bower and repeat the above steps to ensure that it's not an issue on your end.
If it's not, then something is probably wrong with the author's source code.