I am developing a little app that works with excel books, when I run it, it opens a excel book, I ran this code in windows 7 and the excel app was shown in task manager but I ran it again in windows 10 and a it was not shown in task manager.
I want it to be shown in task manager because sometimes the code crashes so I need to close the app from the task manager. I think it is a problem related to SO.
Do you know how to solve it?
enter image description here
enter image description here
enter image description here
Open Powershell as admin and type get-process. Verify that the Excel process is running, and type stop-process -Name Excel and press enter.
Good to go.
I bet you're looking at the Applications tab, not going to the Processes tab.
Press Ctrl+Alt+Del . (an alternative is Ctrl+Shift+Esc on many systems.)
Click Start Task Manager
Click the Processes tab. (#1 in the image below)
Click the Row Heading Image Name (to sort the processes alphabetically) (#2 in image)
Scroll down (#3) the list of images until you get to the 'E' section.
If Excel is running, you will see at least one process named EXCEL.EXE (etc)
If you still can't find it, please take a screen shot of the Processes tab, and add it to your question, along with more of an explanation of why you think it should be showing.
Remember that the best way to remove all running processes and "refresh everything" is to reboot. Every computer should be rebooted at least once a day -- or much more often than that when troubleshooting buggy programs. Or in your case, Reboot every time Excel crashes.
More Info:
Task Manager (Windows)
Finally, I solved it, I just had to update the task manager by pressing the key F5 each time I run a new program, I think it is a bug.
Anyway, Thanks for your help.
Related
When I open Logisim on my Windows 10 device, the task bar options are all clumped together and difficult to read(Screenshot tagged in the post). But looks fine on mac.
Screenshot of Left side Task Bar
Any help would be great.
Try pressing Windows Key + Up key.
Another possible solution is to hit the Windows button. This tends to bring up the task bar in most programs, for me, at least.
This may seem off topic, but I'd create a manifest file for this particular program if it occurs only there. That may solve the problem if done correctly.
I have tried all the possible solutions to solve it given in the internet. But my problem does not solved.
So I want to reset my pc. If so is my pc get back to normal state. Previously I have resetted my pc for another problem. Is my resetting option works again. My friends said that reset options works only once...
Can anybody suggest me what to do??
The issue here seems to be that Windows thinks you have a new monitor that does not exist.
The most common solution that seems to have worked for many people (did not actually work for me, but worth a try): Wait long enough so the mouse cursor to appear when you move the mouse. (blank screen with a white mouse cursor) Then press the Ctrl and enter your login password. Wait until login competed then press Win+P keys, down arrow keys twice, and enter to extend display. (this spans your monitors onto one display)
The solution that worked for me was to unplug all monitors, reboot (hard reset, holding down power button), then plug in just one monitor. (may need to reboot again)
I solved the issue by pressing
Press Ctrl+alt+Esc.
Task Manager Window Appears,Then Click File
Option above,then Select Run New Task from the options that are
listed.
3.Create New Task Window appears and type "explorer" and press Ok. Screen Appears and Restart your laptop again .
You can try the following solution. It works perfectly. 1. Press Ctrl+alt+del 2. Select Task manager 3. Select File option above 4. Click Run new task 5. Type "explorer.exe" and press Enter You'll screen appears again!!
I am developing a Excel plugin. It works all right for Excel versions before 2013. But a lot of features is broken when it runs against Excel 2013. I found the root cause is all windows are running in only one process in Excel 2013. Even if user explicitly launch a new window by double-clicking the shortcut on the desktop or by clicking the item in the start menu, no new process is created.
This results in the status conflict between processes. Status bar and ribbon is shared. For instance, when I update the status bar information in one window, the other windows' are also updated. When I check/uncheck a ribbon button in one window, the other windows' buttons are also checked/unchecked.
I think a possible solution is to change some configurations to make it work as before. But I found nothing relevant by searching on google.
Does anyone know how to make it or is there any other solution?
With Excel 2013, the default you have is to create a new window within the existing Excel process. In order to force the creation of a separate instance of the Excel process, you have these options:
Option 1
From the command prompt, run EXCEL /X and you will open Excel window as a new instance. The /X command switch forces the creation of a new instance.
Option 2
Right click on the Excel icon in Windows taskbar
Go down to where it lists the application
Hold down the ALT key on the keyboard and click "Excel 2013/2016"
It should give you this prompt, "Do you want to start a new instance of Excel?"
Click "Yes!"
Option 3
Use this technique to open an existing document directly:
Hold down Alt.
Right click Excel file.
Click Open.
Continue holding down Alt until the "Do you want to start a new instance of Excel" dialogue pops up.
Click Yes.
For more detail,please visit:
http://sqlblog.com/blogs/marco_russo/archive/2012/07/24/running-excel-2013-in-a-separate-instance-excel-powerpivot.aspx
re. "Right click on the Excel Tab in Windows taskbar keeping the ALT key pressed"
-This option is not available in Windows 10 with Excel 2016.
However, the Excel /X option works and a second change-undo buffer is created, as noted above, in the new process.
From what I can see on the web, this is a fairly common complaint, but answers seem to be rarer. The problem is this:
We have a number of Excel VBA apps which work perfectly on a number of users' machines. However on one machine they stop on certain lines of code. It is always the same lines, but those lines seem to have nothing in common with one another.
If you press F5 (run) after the halt, the app continues, so it's almost like a break point has been added. We've tried selecting 'remove all breaks' from the menu and even adding a break and removing it again.
We've had this issue with single apps before and we've 'bodged' it by cutting code out of modules, compiling and then pasting it back in etc.
The problem now seems to relate to Excel itself rather than a single .xls, so we're a little unsure how to manage this.
Any help would be gratefully received :)
Thanks,
Philip Whittington
I have found a 2nd solution.
Press "Debug" button in the popup.
Press Ctrl+Pause|Break twice.
Hit the play button to continue.
Save the file after completion.
One solution is here:
The solution for this problem is to add the line of code
“Application.EnableCancelKey = xlDisabled” in the first line of your
macro.. This will fix the problem and you will be able to execute the macro
successfully without getting the error message “Code execution has been interrupted”.
But, after I inserted this line of code, I was not able to use Ctrl+Break any more. So it works but not greatly.
This problem comes from a strange quirk within Office/Windows.
After developing the same piece of VBA code and running it hundreds of times (literally) over the last couple days I ran into this problem just now. The only thing that has been different is that just prior to experiencing this perplexing problem I accidentally ended the execution of the VBA code with an unorthodox method.
I cleaned out all temp files, rebooted, etc... When I ran the code again after all of this I still got the issue - before I entered the first loop. It makes sense that "press "Debug" button in the popup, then press twice [Ctrl+Break] and after this can continue without stops" because something in the combination of Office/Windows has not released the execution. It is stuck.
The redundant Ctrl+Break action probably resolves the lingering execution.
I found hitting ctrl+break while the macro wasn't running fixed the problem.
I would try the usual remedial things:
- Run Rob Bovey's VBA Code Cleaner on your VBA Code
- remove all addins on the users PC, particularly COM and .NET addins
- Delete all the users .EXD files (MSoft Update incompatibilities)
- Run Excel Detect & Repair on the users system
- check the size of the user's .xlb file (should be 20-30K)
- Reboot then delete all the users Temp files
I have came across this issue few times during the development of one complex Excel VBA app. Sometimes Excel started to break VBA object quite randomly. And the only remedy was to reboot machine. After reboot, Excel usually started to act normally.
Soon I have found out that possible solution to this issue is to hit CTRL+Break once when macro is NOT running. Maybe this can help to you too.
Thanks to everyone for their input. This problem got solved by choosing REPAIR in Control Panel. I guess this explicitly re-registers some of Office's native COM components and does stuff that REINSTALL doesn't. I expect the latter just goes through a checklist and sometimes accepts what's there if it's already installed, maybe. I then had a separate issue with registering my own .NET dll for COM interop on the user's machine (despite this also working on other machines) though I think this was my error rather than Microsoft. Thanks again, I really appreciate it.
I have had this problem also using excel 2007 with a foobar.xlsm (macro enabled ) workbook which would get the "Code execution has been interrupted" by simply trying to close the workbook on the red X in the right corner with no macros running at all, or any "initialize" form, workbook, or workheet macros either. The options I got were "End" or "Continue", Debug was always greyed out. I did as a previous poster suggested Control Panel->Programs and Features-> right click "Microsoft Office Proffesional 2007" (in my case) ->change->repair.
This resolved the problem for me.
I might add this happened soon after a MS update and I also found an addin in Excel called "Team Foundation" from Microsoft which I certainly didnt install voluntarily
I would like to add more details to Stan's answer #2 for below reasons:
I faced this issue myself more than dozen times and depending on project conditions, I chose between stan's voodoo magic answer #1 or #2. When I kept on facing it again, I become more inquistive that why it happens in first place.
I'd like to add answer for Mac users too.
There are limitations with both these possible answers:
if the code is protected (and you don't know password) then answer #1 won't help.
if the code is unprotected then answer #2 won't let you debug the code.
It may happen due to any of the below reasons:
Operating system not allocating system resources to the Excel process. (Solution: One needs to just start the operating system - success rate is very low but has known to work many times)
P-code is the intermediate code that was used in Visual Basic (before .NET) and hence it is still used in the VBA. It enabled a more compact executable at the expense of slower execution. Why I am talking about p-code? Because it gets corrupted sometimes between multiple executions and large files or just due to installation of the software (Excel) went corrupt somewhere. When p-code corrupts. the code execution keeps getting interrupted. Solution: In these cases, it is assumed that your code has started to corrupt and chances in future are that your Excel workbook also get corrupt giving you messages like "excel file corrupted and cannot be opened". Hence, as a quick solution, you can rely on answer #1 or answer #2 as per your requirements. However, never ignore the signs of corruption. It's better to copy your code modules in notepad, delete the modules, save & close the workbook, close the excel. Now, re-open the workbook and start creating new modules with the code copied earlier to notepad.
Mac users, try any of the below option and of them will definitely work depending on your system architecture i.e. OS and Office version
Ctrl + Pause
Ctrl + ScrLk
Esc + Esc (Press twice consecutively)
You will be put into break mode using the above key combinations as the macro suspends execution immediately finishing the current task. This is replacement of Step 2.
Solution: To overcome the limitation of using answer #1 and answer #2, I use xlErrorHandler along with Resume statement in the Error Handler if the error code is 18. Then, the interrupt is sent to the running procedure as an error, trappable by an error handler set up with an On Error GoTo statement. The trappable error code is 18. The current procedure is interrupted, and the user can debug or end the procedure. Microsoft gives caution that do not use this if your error handler has resume statement else your error handler always returns to the same statement. That's exactly we want in unwanted meaningless interruptions of code execution.
My current reputation does not yet allow to post this as a comment.
Stans solution to enter the debug mode, press twice Ctrl+Break, play on, save did solve my problem, but I have two unexpected twists:
My project struture is password protected, so in order to get into the Debug Mode I had to first enter Developer mode, click on the project structure and enter the password.
My project is a template file (.xmtl). I opened the file via double click which opens it as .xml with a "1" at the end of the previous file name. I fixed the bug as by Stans instruction and saved it as that ...1.xml file. When I then opened the template again, this time as template, and wanted to apply the same bug fix to that file, the bug was gone! I did not change this file and still no bug at executing the Macro. This means to me that the bug is not actually in the file, but in a (hidden) setting in Excel.
If it's a phantom breakpoint:
1 Delete the offending line of code
2 Run the code again
3 Repaste the line
I found this laughably simple solution after spending a couple days wading through all the answers here and elsewhere. I figured, if I link it to my original question it might help some other poor chap, since the question it's on is VBA break execution when there's no break key on keyboard and this is more applicable.
Link to original answer
I faced the same issue today. Resolved it with these steps.
Create a new module
Move the procedure that is causing the issue to this new module.
Save project
Run macro again.
This time, the code execution will run till completion without any intermediate stops.
Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 10 years ago.
Improve this question
Right now, I'm getting it in Excel 2007, but I've gotten the same error in pretty much every version of Excel I've used since 97. The only discernable similarity is that happens on my office PC. It's never bothered me on my home PC.
In Excel 2003, I was able to mess around in the clipboard options until it went away. In 2007, though, the options seem to be seriously limited and generally useless. Google wasn't much help, either.
check this tip. worked for here
http://mobeer.blogspot.com/2009/01/excel-2007-cannot-empty-clipboard.html:
This might save somebody some time and headaches if google picks it
up. I was getting a 'Cannot empty the Clipboard' error every time I
moved cells around in Excel - eventually I mucked around with the
settings and made it go away. Here's how; In the excel main menu
(glass globe w/logo), click Excel options, then Advanced, then turn
off 'Show paste options buttons'
How exciting was this as my first post of the year?
Update: I still haven't found a permanent solution but I found another
thing that seems to help. In Excel 2007, from the "home" tab, the
first thing on the left is the clipboard tool panel. Expand the panel
to view the clipboard and in the clipboard you might find "cannot
empty clipboard" as an entry. Empty the clipboard, keep the panel open
for a second or two while you do a few cut and pastes/drags etc. and
then the bogey seems to go away.
I call this the cable dance because back in the day I had a printer
that only worked if you unplugged the cable, shook it out and plugged
it back in.
Good answers by Paul Simon and Steve Homer, I shut down team viewer and that did the trick.
Skype or other programs may trigger the same glitch, but in this instance, I recalled the problem occurred when I tried to cut n paste a 2MB file from remote system through windows right click rather than using "File Transfer function in TV. An error message appeared, then the problem with Excel "'Cannot empty clipboard' message.
This problem occurs when you are working on a remote system. After copying and pasting a huge amount of data it shows the error. I have found the solution to this problem.
Go to remote systems task manager and perform the following task
Go to Task Manager > Processes
Look for "rdpclip.exe"
End that process
Your problem will be solved.
I found this advice:
There are a few steps to solve your
problem:
First thing to do is Clear items from
the Office Clipboard. If the Microsoft
Office Clipboard is not displayed in
the task pane, click Office Clipboard
on the Edit menu. On the Office
Clipboard task pane, do one of the
following: To clear all items, click
Clear All .
Next thing is to switch off the
clipboard show option. To do this,
what you can do is to again display
the Clipboard menu (select Office
Clipboard from Edit Menu). And in the
selection button "Options" at the
bottom of the screen, select this
particular option: "Collect Without
Showing Office Clipboard"
and now, you are relieved of the bug.
Hope this helps.
here. I have the problem, but it's sporadic. I just tried the technique, and I don't see the problem, but since it's sporadic I won't know for a while if it's gone for good.
I got rid of the problem by unchecking the option for "Alert before overwriting cells" in Excel options. I'm using Excel 2007
If you can't find the clipboard, then close that excel sheet and reopen it again. This will solve your problem.
Try http://support.microsoft.com/kb/207438
which will work for 2007 if you follow v12.0 in the registry.
Are you running Skype? This has been the best solution I have found to get rid of the "cannot empty the clipboard error" in Excel 2007 & 2010. Delete the Skype add-on in IE and/or Firefox and good-bye annoying error!
In reply to rjacobs7 post on February 28, 2011
Cannot clear clipboard error - Windows 7, Excel 2010 -
This error occurs nearly every time a drag and drop of cell contents is attempted. I've had this same error over the past 10 years on older computers and older versions of Windows and Office. It has now reoccurred with a new laptop running Windows 7 64 bit and Office 2010. The issue can be replicated only if a browser - IE or Firefox - is open at the same time that Excel is open. Having Word and/or Outlook open at the same time will not cause the problem to occur unless a browser is also open. This error is extremely irritating and no solutions from Microsoft or other posts on this issue resolve it.
I have a solution - at least for me! Delete the Skype add-in in IE and Firefox and the "cannot clear clipboard" error after a drag and drop goes away when IE and/or Firefox are running. Apparently some sort of memory-management issue with Skype, Office and the browsers.
I've read lots of blogs on this subject going back to 2005!!
I'm sure that Paul Simon is right (see his submission to this thread) and it's a question of finding which program on your machine is locking the clipboard. I do not run the programs listed in various solutons suggested (eg on Microsoft website) nor am I in a networked or virtual environment so for me those aren't the locking programs (but might be for you). Similarly I don't have the RDP task going in my processes. For me the locking program is the Skype Add-in.
I am not a sophisticated user and am scared of altering my registry so didn't want to go there.
I have now been able to reproduce accurately the "cannot clear the clipboard" message by turning on and off the skype addins in internet explorer. This is easy for amateurs to do and might be one of the more common clipboard locking programs:
I first confirmed that I can turn on/off the problem in Excel by opening/closing internet explorer.
Then I disabled the skype addins:
Internet Explorer: Tools menu --> Internet Options ; Programs Tab ; Manage Add-ons button; Toolbars and Extensions selected in panel on left - scroll down to find skype add ons. Press Disable button.
NB have to restart Internet explorer before this works.
.... 4 days later.... it's still working
I copied a picture (instead of text) that I had in my excel 2007 file and that solved the problem for me. The picture copied to the (then empty) clipboard. I could then copy cells normally even after clearing the clipboard of the picture. I think a graph object should also do the trick.
I have seen various answers which say when I uninstalled this or that it worked. I think that the uninstall is probably just sorting out an issue in the registry, rather it being an issue with the particular application that is being uninstalled.
I have also seen cases of people saying kill the RDP task but I don't have that and I still have the error.
I have seen cases of people saying clear the clipboard in Excel, but that doesn't work for me - nor does changing the settings in the Clipboard.
I believe that the issue is that an application has a lock on the clipboard and that application is not releasing it. The clipboard is a shared resource, so that implies that each application has to get a lock on it before changing it and then release the lock once it has completed the change, however, it looks like sometimes the lock is not released.
I found that the following cured it. Close down all MS applications including IE and Outlook. Check Task Manager processes to make sure that they are all gone.
Then restart the application where you had the Copy and Paste issue and it will probably then work.
Regards
Paul Simon