I have installed my DB2 in VM - Linux. While i try to connect my SQL developer with DB2 from windows it gives the error. I have looked everywhere but but nothing on this. Please help. Attaching screenshot for reference.
following is the result of my db2level
DB21085I Instance "gomobile" uses "64" bits and DB2 code release "SQL10010" with level identifier "0201010E".
Informational tokens are "DB2 v10.1.0.0", "s120403", "LINUXAMD64101", and Fix Pack "0".
Product is installed at "/opt/ibm/db2/V10.1".
Related
From time to time when I run some queries I get this error message :
An operation that uses the database driver could not be completed. If the driver is a Microsoft driver, make sure the driver file isn't damaged
I didn't found yet how to fix it with internet help.
this last website give a "solution" but I can't do the same.
"Well in my case it worked by giving the user access to the DB it is accessing."
I just have a worksheet who use others files from my company network, I don't use any database ...
I can't reinstall the driver or anything else, my company have a very strict politic about IT security.
May I have some help ?
I had the same issue when I try to connect Analysis service in Azure. The error message is misguiding. In actual, you are missing few client drivers that are needed to connect to Azure Analysis services. Install all the missing drivers (OLEDB, AMO and ADOMD) from https://learn.microsoft.com/en-us/analysis-services/client-libraries?view=asallproducts-allversions#known-issues and you should be good to go.
I think OLEDB installation should suffice the need but I did all three to avoid future encounters related to other admin stuff. Check if OLEDB updated # C:\Program Files (x86)\Microsoft Analysis Services\AS OLEDB\140 by comparing msolap.dll version. Latest version as I write this is 15.1.108.23
Tip: 1) Try connecting to Analysis Service from Excel by following the steps - Data Menu --> Get Data --> From Database --> From Analysis Services. Follow the prompts by filling appropriate info. Bingo! You are in!
2) Wait for a while if still you can't connect after installing all drivers. I don't know the actual reason why but was able to connect next day.
Please mark this as an answer if it helps to solve your problem.
Good Luck!
Update - 1/5/2021
Today I face same ugly error again which made me to rethink what else could be gone wrong in the system. Later realized that I had restarted the machine and that removed the temp connection file referred by Excel file. Following the steps to reconnect under the Tip section in above instructions let me successfully in.
I'm getting an error trying to connect to an Oracle DB, and I'm pretty sure I have my variables out of whack.
The error I'm getting is
Microsoft ODBC Driver for Oracle gives ORA-01019 error, can't seem to find the oracle driver
My current Environment and System variables are as such:
System Variables:
ORACLE_HOME: C:\app\MyUser\product\instantclient-basic-nt-12.2.0.1.0\instantclient_12_2
I also have a Path variable reference: Same path C:\app\MyUser\product\instantclient-basic-nt-12.2.0.1.0\instantclient_12_2
I do not have a reference to the Oracle client in my User Variables, though.
I'm trying to get into Sage 50 (v20 2014) via ODBC in Excel 2016 64bit. I keep running into connection problems.
I've set up a 64bit DSN using the utility on the Sage disk and I get the following...
If I go through 'Data/From other sources/From Microsoft Query' I get the usual 'Choose data source' box and the Sage DSN is visible. If I click it and click ok MS Query launches and then crashes immediately and I get 'Microsoft Query has stopped working'.
Interestingly, if I go back to the 'Choose Data Source' box, I get the error 'One or more of the folders in the search path could not be accessed'.
The default path set in the DSN is to 'C:\ProgramData\Sage\Accounts\2014\Company.000\ACCDATA' - the actual Sage database that I'm trying to access is in a network folder - 'V:\SHARED\Sage\COMPANY.002\ACCDATA'. I've tried both paths in the DSN and get the same results.
If I go through 'Data/New Query/From Other Sources/From ODBC' and then choose the Sage DSN, I get a full list of the tables but when I click on one of them to generate a preview, I get the following error...
DataSource.Error:ODBC:ERROR[42S02] Table not found
Details:
DataSourceKind=Odbc
DataSourcePath=dsn=SageLine50v20
OdbcErrors=Table
Also, if I use 'From data Connection Wizard', Excel crashes as soon as I choose the Sage DSN.
I'm not using any kind of connection string so I don't think it's authenticating with a user - I'm wondering if that would make a difference and if so, what would the connection string be?
I've been through everything that comes up if I google the problem and I've set up logins correctly etc but it will not connect. I don't know if this might be a 32/64bit comparability issue, but I'm using the 64bit Sage driver from the disk so I assumed that it wouldn't be a problem.
I've also tried connecting with MS PowerBI but I get the same problems.
Sage 50 is temperamental in how it allow connections to their database, what I mean: When it don't change the port, it just reject connections in awkward ways or not connect at all.
I didn't find a solution. However I found this workaround: Open sage, login and close it then connect using the DSN sage created with the sysadmin account(It grants you full access).
When defining the data path, it is critical to include a final backslash e.g
C:\ProgramData\Sage\Accounts\2018\COMPANY.001\ACCDATA\
I am trying to use Node-Oracle package for an application but the select statement returns with "UnKnown Error".
I am able to create a table with the connection object without error but only fails with select statement. I have seen similar issue filed in node -oracle forum and there was no answer for the issue created. I am using oracle express server locally on windows 8 machine .
I have spent a lot of time trying to play around roles of the oracle account/schema I am using but has not helped. I also was able to connect using a sample dot net application without error and execute select statement .
Any suggestion on how to at least figure the actual error would be very helpful .
Thanks in advance.
Edit : I was able to confirm that the error is in the node oracle module , but I am not sure why I see this . All my effort to contain the error in a try catch block in the c++ connection.cpp file is
not working . I am stuck now . Not sure if if it has to do with windows 8 machine .
I am trying to create an instance using the Configuration Manager of WCS 7. I am working on a Win 7 x64 machine with DB2 9.5 64 bit version.
I am struck with this Massloading error when the instance creation happens :
In createInstanceANT.log file :
[Massload] Massloading
C:\IBM\WebSphere\CommerceServer\schema\xml\wcs.keys.xml Error in
MassLoading, please check logs for details.
The error log shows the following error :
[jcc][10165][10044][4.3.111] Invalid database URL syntax:
jdbc:db2://:0/WCSDEMO. ERRORCODE=-4461, SQLSTATE=42815
C:\IBM\WEBSPH~1\COMMER~2\config\DEPLOY~1\xml\createBaseSchema.xml:185:
Error in massloading
WCSDEMO is the database name. The Massloader is not able to get the URL and port to connect. It is supposedly getting them from createInstance.properties file but it is not working. The createInstance.properties file has all the details of the DB to connect.
What could be the reason for this error and how to resolve it ? Is there any configuration change that I am missing ?
Can you provide some more details.
look inside the messages.txt file located in WC_install_dir/instances/instance_name/logs
and confirm what the exact issue is. If it is related to jdbc driver being wrong I may be able to help you.
I've been running into massloading problems with external systems. Eg. databases not on the same machine as the WAS installation.
In these cases I look for the
As you can see setting the loaderDBName to just the name of the database would look on the local machine. But by changing this statement so you load with the syntax
loaderDBName=[DATABASE_SERVER_NAME]:[PORT]/[DATABASE_NAME]
You'll be able to massload using the commerce standard scripts. These changes needs to be done in many scripts. Both for updating fixpacks and enabling features. If you run database updates without the changes it will crash at first and have done all the schema changes to the database that you then need to comment out before trying again.
IBM Software Support is your friend. They'll help you fix it.