No matter which of the three tizen studio 2.0 installers I try they all don't work as they won't accept any path. The CLI installer gives the most detailed description:
** The directory you specify is not allowed to install the Tizen Studio. Some tools of the Tizen Studio will not properly work in the directory with administrator privilege or read-only access rights for your account.=> path
I have tried starting the installer with admin rights and owning the destination folders. Additionally, I switched from JDK 9 to 8.
Still, there seems no way to get the installer running. Any ideas what the reason could be? Thanks!
I managed to install tizen studio and the SDK using the %appdata% path.
If anyone else has the problem, try e.g.
C:\Users\YourName\AppData\Roaming\Samsung\tizen-studio
This is definitely a flaw Samsung should take care of!
I've successfully installed the IDE version with the following method:
Download Tizen Studio Web IDE installer
Open installer with 7-zip archive manager
You should find tizen-sdk.zip archive
Open it and extract it into the C:\tizen-studio folder
Create C:\tizen-studio-data folder
Create sdk.info file inside C:\tizen-studio folder
Put following lines into this file
TIZEN_SDK_INSTALLED_PATH=C:\tizen-studio
TIZEN_SDK_DATA_PATH=C:\tizen-studio-data
You can download packages with C:\tizen-studio\package-manager\package-manager.exe
You can start IDE from C:\tizen-studio\ide\TizenStudio.exe
This worked for me, hope this helps...
#Henry was almost correct and his scenario works on CLI/IDE installers.
And here are actual restrictions on Win10x64 tizen-studio 2.0 installation I've found:
pointed SDK location needs to be in your user directory. For example:
C:\Users\MrSmith\Tizen\tizen-studio
Data location could be anywhere, but in case of CLI installation, it will be near SDK folder.
CLI installation actually does unzip only and all further system configuration needs to be done manually. So, if you need only CLI, you could unzip "web-cli_Tizen_Studio_2.0_windows-64.exe" with 7zip or any other proper archiver where you want and do further manual configuration. (See here https://developer.tizen.org/development/tizen-studio/web-tools/cli)
Probably, if you login under Administrator you will be able to install SDK anywhere. Just "Run as administrator" doesn't work, at least for me.
My system params:
Win10 Pro x64
Oracle JDK 1.8.0_152
Have a fan ;)
I solved this problem that way:
create folder (eg Tizen_Studio)
inside created folder create new (tizen_studio and tizen_studio_data)
add all permissions for that folders for your windows account user
select folders in installation proccess
Enjoy!
The regular way which Samsung provides is working for me:
Make sure you have enough disk space (Tizen Studio needs about 700 MB
on Win10)
Create an empty folder with 2 empty subfolders (e.g. Tizen_IDE->studio (subfolder #1) -> data (subfolder #2)
The important part on Windows 10 is to navigate to YOUR users directory:
For example your user name is Bob. Go to C:\ -> Users -> Bob.
Then create there the empty folder "Tizen_Studio" with the 2 mentioned subfolders.
Check with right-clicking on the Tizen_Studio folder -> Properties -> Security if your Username (here Bob) is listed in groups and users. Click on your profile there in the security tab and look if the folder has full access rights inside the checkboxes (btw this should be automatically set if you choose the right described environment).
Now in the installer dialog you can choose the studio folder for the ide/sdk and the data folder for the installing data request path.
Thats it! Just important to install it inside your username folder!
I had this problem as well (on my Windows 8.1 machine), and ended up using the previous version of Tizen Studio Installer (version 1.3)
https://download.tizen.org/sdk/Installer/tizen-studio_1.3/
It even does not work for me in %APP_DATA% and also not running the installer with Administrative privileges.
But I finally found a solution which worked for me:
Create a new and folder somewhere
disable all inherit privileges on this folder
grant explicit all privileges for your users to this folder
remove all other privileges, especially these for Administrator
Use this folder for Installation
Write useful sofware for tizen ;-)
How bout removing 32 bit Java client and installing 64 bit on win 10?
Worked for me, no one seemed to notice that Installer opened in 7zip has an installer.jar which needs to be run with java client.
Thanks for the advises on opening installer with 7zip.
Related
As a teacher, I am installing Android Studio in for a computer lab. We have shared computers on which users log in.
The problem is that Android Studio insists on installing SDK and a lot of other things in users local directories (users/user_name/local/appdata and users/user_name/local/AppData).
Since the SDK is several hundreds MB heavy and we have roaming profile thisis not acceptable at all.
What I did:
I set up several envrionment variables to non users local directories: ANDROID_SDK_HOME, ANDROID_SDK_ROOT, GRADLE_USER_HOME, GRADLE_HOME.
I edited the idea.properties file to change idea.config.path and idea.system.path to non local directories
During Android Studio first run I explicitely choose the SDK location.
Still here I am with the SDK located in users/local/appData
I am running out of idea. I am installing version 3.4 by I had the exact same problem with 3.3.
I know this isnt a dev question per se, but is there a timeline on a 5.2 build that can be installed on Win 10?
I think the issue i am seeing is just with the installer so an in place upgrade to Win 10 might work fine, but a clean install fails as it doesnt acknowledge IIS 10 or whatever version comes with Win 10.
Thanks!
Official answer - Windows 10 is not yet supported by the currently available Acumatica ERP installers, however the issue has already been fixed internally (AC-56069 - fixed in 4.20.2262, 5.10.0785, 5.20.1012 and newer). Following workaround can be used in the meantime:
Download the Orca tool to edit the MSI file: http://adriank.org/wp-content/uploads/2015/01/Orca.zip
Open the
MSI file using this tool (might be able to right click on MSI and
open with Orca)
Go to the LaunchCondition table
Drop/delete the IIS version condition (inside MSI, the LaunchCondition entry is IISVERSION >="#7"; system does a string comparison and "10" is
smaller than "7")
Save and close Orca
Run the setup
I can't give you an "official" answer but I can give you a work around.
If you download a utility called LessMSI you can extract the installation files. They will come out in a folder called "SourceDir". Simply take these and replace the files in your default installation folder or run them from another location.
Then you can proceed as normal.
The installer only checks if pre-reqs are installed and then copy's the files to the output location. If you have IIS already setup with dotnet support then the rest will be fine.
I do this frequently if I have to install a site with a specific version in order to upgrade or test a client's snapshot.
I have 4.1,4.2,5.1,5.2 running on my Windows 10 workstation as I type
I'm using the VS2013 Installer extension to build a web service installer.
The problem I'm having is that after installing this service, if I go to the inetpub folder, I find no reference to the service I just installed, and the service is evidently installed in the local source folder instead.
This behaviour is consistent regardless of where the installer is run from on the HDD.
If anyone has any insight on this, I'd appreciate it. I assumed that the installation directory would be determined based on the inetpub folder used by the Default Web Site, but it doesn't appear to be.
I just downloaded and installed Visual studio on my computer (windows 8.1) to start building windows 8 apps. The problem is when I try to run any application this error message shows up (the application from this error message is called Parcels.comStarter):
Error 1 Error : DEP0700 : Registration of the app failed. Deployment
Register operation on Package
a783768f-d79c-495b-bf64-e59e4297fb42_1.0.0.0_neutral__1mfyfctfxa0tr
from:
(d:\Gebruikers\wardv_000\Downloads\Parcels.comStarter\Parcels.comStarter\Parcels.com\bin\Debug\AppX\AppxManifest.xml)
failed with error 0x8E5E0530. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues. (0x80073cf9) Parcels.com
I searched the entire internet but I didn't found a solution. I also did reinstall visual studio and I still have the problem.
Thanks in advance
Open the Services management console (services.msc) and stop the Windows Installer service.
In Windows Explorer, go to C:\ProgramData\Microsoft\Windows\AppRepository\ and rename PackageRepository.edb to PackageRepository.edb.backup.
Back in the management console, restart the Windows Installer service.
Now run Visual Studio as an administrator and open your project.
I was having this exact same problem, and the solution for me was to unlink my Windows account from my Microsoft account.
There are a couple of things to try.
Run WSReset (press [Win] then type wsreset)
Delete the metastore and remotemetastore folder here: C:\Users\%userprofile%\AppData\Local\Microsoft\Windows\SettingSync where %userprofile% is your username. (I suggest just renaming them to metastore.old and remotemetastore.old)
Make sure that there are no staged packages for the app in question.
If you re-deployed an app that was already installed by some other user, then you would get a deployment error. This should wear off if you change the identity in your package.appxmanifest fie.
You should try an OS refresh. You should not lose your apps and settings.
After that re-link your windows account to microsoft account.
If that doesnt work...The problem may be that visual studio is not able to delete the application data in local folder. So when you go in the location C:\Users\UserName\AppData\Local\Packages you will find application data of app installed in your computer, now you need to find your app's application data and delete the folder. The folder name is the same as the package family name which you can see in your solution.
now again open the solution and rebuild and your app will run. (hopefully)
close visual studio and simulator before deleting the folder.
make sure that your account is set as administrator.
I had the same problem with visual studio running under Parallels VM. The solution was to copy the project from a cloud based directory to a local directory.
I am getting the following error when starting Visual Studio 2012 as unprivileged user:
An error has occurred while trying to access the log file. Logging may not function properly.
A casual web search showed that the issue used to exist with VMware 6 beta, back in 2006. I also found one other user who experiences the same in a more recent VS version (2008) and it started only recently.
The title of the message box indicates that this comes from VMware. I have VMware 9 Workstation installed. The problem could be related to system updates or the update 2012.2 CTP and hasn't gone with the final 2012.2 update package.
The question:
How can I get rid of the error without actually disabling the VMDebugger add-in?
Temporary workaround:
There is a workaround, disabling VMDebugger in the "Add-in Manager". However, it even seems that unprivileged users are unable to successfully disable it. I had to start VS as admin (I am using SuRun for the purpose) to disable it and the error not reappearing upon next start of the IDE.
I had the exact same problem, this is how I solved it.
I monitored devenv.exe using procmon to find the log path, on my computer it was: %TEMP%\vmware-username
I checked the permissions on the log directory, and discovered that my user had no access - neither read nor write! I gave myself full access and deleted the old log files. That solved it for me.
I think this happened because UAC was disabled when I installed VS and VMware.
In Visual Studio, go to the menubar to VMWARE / About VMWare Virtual Debugger; the Debugger log file will be listed there, e.g. C:\Users\Phil\AppData\Local\Temp\vmware-Phil\vmware-vsid-1.log
Give your user full access to that file.
(This solution was for Visual Studio 2013, VMware Workstation 11.1.2, Windows 8.1.)
The fastest and easiest way to solve is...
1. Locate the folder %temp%\vmware-{username}
2. Delete this folder. The folder will be created by opening the Visual Studio.
Note: You need to open the Visual Studio without admin rights to resolve the issue!
Background: Mostly this happens if you use the VMware debugger plugin the first time under admin rights (because your app may need this right to run properly). This creates the folder under admin rights with the admin permissions. Everytime you open the Visual Studio with admin rights, you have no problems.
Examples
Windows: C:\Documents and Settings\<username>\Local Settings\Temp\vmware-<username>-<PID>.log
Linux: /tmp/vmware-<username>/ui-<PID>.log
This post helped me
The fastest and easiest way to solve is...
1. Locate the folder %temp%\vmware-{username}
Go in windows+R %temp% , delete all , ready !