I'm trying to install DataStax Bulk Loader on my Windows machine in order to import json file to Cassandra databse. I just follow the installation instructions from the official webstie. It's just unpack the folder. Printing dsbulkfrom any catalogue into cmd prints the following result: "dsbulk" is not internal or external command, executable program, or batch file. However I added C:\DSBulk\dsbulk-1.7.0\bin into PATH variables. Anyone who faced with this problem what did you do? Thanks :D
Change into the bin/ directory where you unzipped the package. For example:
C:> cd C:\DSBulk\dsbulk-1.7.0\bin
Then run the dsbulk.cmd from there.
NOTE: Make sure you have both the classpath and Java home set in your environment. Cheers!
I have instaled Cygwin after running MinGW for a while now. But when I try to compile the console gives me:
/usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe: error while loading shared libraries: ?: cannot open shared object file: No such file or directory
What does this mean?
I have the same problem and I found the solution.
According to the FAQ of Cygwin
Q: Why is C:\cygwin\usr\bin invisible from windows?
A: Because it does not really exist. In cygwin, /usr/bin is just a link to /bin.
So trying to add "C:\cygwin\usr\bin" to PATH will be in vain.
Add "C:\cygwin64\bin" to PATH instead. Hope this helps :)
You are missing a library, please run cygcheck /usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe or ldd /usr/lib/gcc/x86_64-pc-cygwin/4.9.2/cc1.exe to see what is the missing library.
(I'd rather ask a question in the comments first, but I don't have enough reputation yet.)
Your cc1 is unable to load some DLLs it needs to start. Looking at the Cygwin source code, this can be either a library specified in LD_PRELOAD, or -- more probably -- a library the executable depends on. The ? in the error message seems to be the default return value of find_first_notloaded_dll (hookapi.cc), in case the function can't determine what library is missing.
To diagnose the issue, I suggest checking your PATH variable (or even clearing it of any non-Cygwin paths and trying the compilation again) and/or using Dependency Walker to find the missing DLLs (start it from a Cygwin shell, so it can see the same PATH). ldd (included with Cygwin) may also give some clues, but I wouldn't bet on it.
It's possible a clean re-install of Cygwin will be necessary to solve the issue.
Most likely, you are simply missing /usr/bin in the PATH variable.
Adding 'export PATH=/usr/bin:$PATH' to your .bashrc file will solve the issue.
Adding some background info. I had the same problem when building my own program and linking it against graphviz cgraph.dll. Turns out this is related to where windows searches for DLLs (see here: https://msdn.microsoft.com/en-us/library/7d83bc18.aspx) So adding the path of your missing library to PATH should fix the problem.
It is unfortunate that the message doesn't include the name of the library. Luckily cmd.exe DOES give you this name (so it's good for something after all;)
Are you including the path to your lib directory?
Looks like you are not
I'm not very familiar with Cygwin, I mainly use MinGW, but I think the error message speaks for itself
I also came this error on windows machine while executing .exe file generated by scilab2C i.e toolbox for Scilab
For Windows 32 bit Add the environment variable path as follow :
C:\cygwin\usr\i686-pc-cygwin\bin
Hope so this will solve your issue.
Just had this problem trying to compile a package with make and it wanted some cygguile dll file that was just installed along with make.
My solution was I had not only migrated my cygwin64 directory across drives because the sector sizes were mismatched for some reason even though the drivers were both under 2TB and should have been using 512 byte sector sizes.. So I had to install a new system and move files over there, might have had weird permissions on them.
Also had to patch cygwin1.dll end of Jan 2020 because of a recent input problem in ConEmu with Windows 10 1903 build, but just did it again with this working so that doesn't seem to be the issue.
Reinstalling cygwin by deleting that entire directory, taking ownership of it first.., seemed to work now...
Operating System: Windows 8.1
Cygwin Version: Latest version, as of Sept. 9, 2014.
Guile Version: 1.8
Background:
My overall goal is to install a program called "MIT Photonics Band (MPB)" on Windows 8.1 using Cygwin. I am a new user, as I started using Cygwin a few days ago. I was able to install all required packages successfully after some troubleshooting. Eventually, I installed the MPB program using the generic ./configure, make, make install commands with slight modifications. All of this appeared to be successful.
The Problem:
When I try to run the executable program, I get the following error:
ERROR: In procedure primitive-load-path:
ERROR: Unable to find file "ice-9/boot-9.scm" in load path
Attempt At Solution:
The following is a page of the MPB installation manual:
MPB Installation Manual - Shared Libraries.
It appears to address my issue. Note that it mentions LIBDIR and foobar. For my operating system, foobar is PATH. The LIBDIR, however, I do not know explicitly because my "make install" output did not indicate it, as the manual suggests it should have. Anyhow, I found the location of ice-9/boot-9.scm through a computer search and its directory happens to be here:
C:\cygwin64\usr\share\guile\1.8\ice-9
Hence, I ran the following command (again, for a Windows 8.1 operating system) in bash:
$ export PATH="/usr/share/guile/1.8/ice-9:$PATH"
However, note that when I run $PATH, I get this message:
-bash: /usr/share/guile/1.8/ice-9:/usr/local/bin:/usr/bin:/cygdrive/c/Program: No such file or directory
I also tried:
$ export GUILE_LOAD_PATH="/usr/share/guile/1.8/ice-9:$GUILE_LOAD_PATH"
That yielded:
-bash: /usr/share/guile/1.8/ice-9:: No such file or directory
Furthermore, I tried to copy and paste the "ice-9" folder in various locations for a quick and sloppy solution, but it was to no avail. I searched online for answers as some users have had an issue with the program not finding the ice-9/boot-9.scm file in the past. I could not get my problem solved.
Please let me know if I need to provide more information. I appreciate the help!
EDIT: In response to the first user's post, I used the command echo $PATH and the following was the output:
/usr/share/guile/1.8:/usr/local/bin:/usr/bin:/cygdrive/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/cygdrive/c/Program Files (x86)/AMD APP/bin/x86_64:/cygdrive/c/Program Files (x86)/AMD APP/bin/x86:/cygdrive/c/Windows/system32:/cygdrive/c/Windows:/cygdrive/c/Windows/System32/Wbem:/cygdrive/c/Windows/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files (x86)/Windows Live/Shared:/cygdrive/c/Program Files (x86)/ATI Technologies/ATI.ACE/Core-Static:/cygdrive/c/Program Files/MATLAB/R2013a/runtime/win64:/cygdrive/c/Program Files/MATLAB/R2013a/bin:/cygdrive/c/Program Files (x86)/Windows Kits/8.1/Windows Performance Toolkit:/cygdrive/c/Program Files/Microsoft SQL Server/110/Tools/Binn:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/WINDOWS/System32/WindowsPowerShell/v1.0:/cygdrive/c/Program Files/MATLAB/MATLAB Compiler Runtime/v81/runtime/win64:/usr/lib/lapack
Note that the problem still persists.
EDIT 2:
So I opened the "load.scm" file for GUILE and I found this line:
(define load-path '("/usr/share/emacs/20.7/lisp/"
"/usr/share/emacs/20.7/lisp/emacs-lisp/"))
I tried to add /usr/share/guile/1.8/ to these directories, but that didn't do anything either. Can't tell what's wrong.
I am running into errors with opencv. I downloaded a package online and compiled each of the folders by cd into them and running make through the command line. But when I try using one of the functions, I run into this error: libopencv_core.so.2.3: cannot open shared object file: No such file or directory
The file its trying to reach is indeed there, since I checked this, but for some reason its saying its not. I am pretty bad at figuring out path problems but I think this is one of them. Can anyone tell me how to fix this? Thanks
I've used stack overflow a lot in the past and found it extremely helpful, but I find myself needing to ask my first quest:
I am working on a map reduce project that will use Hbase. I am developing on windows and using cygwin's shell to run Hbase. I have followed all the install steps for installing Hbase on windows, but when I try to run it I get the following error:
cygpath: error converting
"c:\cygwin\usr\local\hbase-0.92.1/conf:/usr/local/jre7/lib/tools.jar:c:\cygwin\usr\local\hbase-0.92.1:c:\cygwin\usr\local\hbase-0.92.1/lib/*.jar"
- Unknown error -1
And then it reports that it can't find the main class for some necessary .jar files which I'm assuming has to do with cygpath not handling the paths to those jars correctly.
Any help is greatly appreciated.