I am building a pricing guide in excel.
When entering a product, I list the name, size and how much I paid for it.
I want to know how to make the size divisible. for example; "32oz" would have a value of 32.
I could just create five columns, one for name of the product, one for unit of measurement, one for value, and the combination of the two; B1=32, C1=oz, D1=B1&C1, then hide the cells, but this seems sloppy.
Can I create a declaration, so excel know 32oz=32 from a list?
The point of this is to make it user friendly. If I program all the values into it, then anyone using it doesn't have to remember to unhide cells, then listing everything.
This is currently what I have:
Related
So I'm trying to create an Excel sheet to split the values of 70 items into six groups.
For reference, this is to divide my grandma's estate evenly for her six children. I have approx. 70 items and their appraised values in an Excel sheet, but not sure the best way to go about this. I was hoping to use Solver, but haven't been able to figure it out.
Ideally I could make it so people could pick specific items that they want and run the Excel sheet again to re-balance all the values.
Thanks!
So set this up, based on a thrown together set of values.
Each sumproduct is held to be <= to the (total value / 6)-10. You may want to reduce this to 5 or 2 etc but the smaller you go the harder it is to solve due to the values of the items.
I have done this for 30 items, there is a limit to the number of variables in the Solver - if you hit that then you might consider pairing items, or manually setting some will help, see below.
You might want to add something for sentimental value - I will leave you to consider that.
As for manually setting some items then you can set those items to one, move them to the top or bottom and remove them from the Solver variable cells - that way they won't get changed, but they still need to be included for the value. If the values are similar then they can be taken out if the differences are ignored by the parties.
So, edited the model, see below. Note that 1 item is not allocated. This could be addressed by changing the constraint controlling cells J9:J38 but it comes down to the difficulty of finding an exact solution and that is also why the 10 can be adjusted...
Hopefully the title makes some sense because I'm trying to wrap my head around the logic and I'm not quite sure how to phrase the question.I'll try to give a brief explanation of the end goal without over complicating it with unnecessary details.
I have a table of survey score averages for every month per person and a correlating table with the number of surveys each person received for each month. The logic is essentially multiple the score for each month by the number of surveys, combine them, divide by the total number of surveys within that time period to get their true average. Where things get a little complicated is that I have to include the ability to set a custom date range and return the value. So sometimes I might be looking at the average for Jan - Apr, other times I might just be looking at Feb-Mar etc.
I think sumproduct is going to get what I need done but I'm running into issues trying to write it out. I've written it several different ways and none of them worked so here's one that best conveys what I'm trying to do,
=SUMPRODUCT(--(F7:I7,L7:O7>=C2),--(F7:I7,L7:O7<=C3),--(E8:E12,K8:K12=B9),tbl_average[[Jan-20]:[Apr-20]],tbl_surveys[[Jan-20]:[Apr-20]])
I super appreciate any assistance I can get on this. I'm hoping the end result is not nearly as difficult as I'm making it out to be.
Some additional information:
I'm going to be using this same process to calculate multiple metrics across multiple worksheets.In the test example each of the tables will most likely be on different sheets. The dashboard with the calculated results will contain everyone's names and will be filtered and rearranged frequently, so I need to make sure we're always matching directly to their names and not just the relative rows. Basically, in my example I show that Agent 1 is always lined up on row 8 but that's not always going to be the case. Agent 1 could be in Row 8 on Sheet 1, Row 10 on Sheet 2, and Row 12 on Sheet 3 and I need all the correct values to multiply and sum against one another.
Edited:
after using Solver which Saulo Suggested I have managed to get excel sorting them in to groups up to 8 groups of 3. though am approaching troubles when going further ideally at this time I need to be able to do 18 groups of 3. but even with the same settings obviously adjusting for the increase in groups excel seems to belly up on the process and fails, any suggestions to adapt to this?
I am trying to figure out an easy and as accurate as possible without going too crazy with the math and formulas as I am basic with my excel coding (coding in general) to calculate the ideal groups of 3 based on rank and strength for a video game.
I want to pair the strongest with the weakest and then fill the gaps evenly for the 3rd person. so, that each team’s overall strength is the same roughly.
factors I have is a designated leader(rank) and an overall power level(strength).
doing this manually isn't too hard but trying to automate it is. any thoughts or suggestions would be amazing!?
something like this but automated which is where I am getting stuck, as I want to be able to add more players and adjust strengths as they come along.
Hope this makes sense.
Jordan, you have a classic situation to use "Solver". First of all, you have to make "Solver available in your Excel. Select Home -> Option -> Supplements -> Solver. Then, the solver button´s will be at the "Data" menu.
Solver is about solving a problem with especific conditions, changing specific cell, with specifc purpose. In your case, your purpose is creat teams with the minimal strength diference. A condition of your problem is that teams should have the same number of players. See how I organized the sheet.
Sheet
When do you open solver, the first field is "Seat Goal". Our goal (or purpose) is reduce the diference between teams as minimal as possible. So we selected the cell with the diference between teams. Then we have to tell to excel that our purpose is that cell have the minimal value (chossing "min").
Then we have to tell excel wich cells they can change values to achieve our goal. In this case, Excel can change the teams of player, so we select the cells with the teams.
Last we have to tell excel whats condition (or restrictions) of this problem. The first restction is that the total of player of team 1 is tree. The total of players of team 2 is, both, 3. Then we have to tell to excel what are the limits (superior and inferior) of values of variable cells. In this case, we chose superior or equal to 1, AND (other restrction) inferior or equal to 2.
Ok. Now we have a problem with specif goal, changing the value of specifc cells, with specif restriction. Now solver can work. Then choose the method of soluction "Evolutionary", Honestly, I do know the diference between the methods, but my experience is that evolutionary method works better than the others.
I recomend reading the excel tutorial on solver. At first, all of us think that is too dificult, but believe that is simpler than it seems.
I am working on a data set and I need to calculate the daily revenue of fake AirBnb listings using nested IF statements. This is for a bootcamp I am attending, and I am stuck.
My instructions are as follows:
Estimate revenue per listing
Assume each booking always has 2 guests, unless the listing accommodates only one;
The booking is always for the minimum number of days allowed;
Only half of the bookings generate a review;
The extra person charge is per night (column name ‘extra_people’)
○ Format: have a column that calculates daily revenue (account for number of guests accommodated, number of guests included in the price, extra charge for additional people - using nested IF statements); another column would then calculates revenue per booking; finally, multiply that by the number of total stays the listings has had.
Using the data in my dataset, I am attempting to fill out column AA. So far this is what I have for my formula,
However, I get an error. I know the first part of this formula would work for the scenario in row 4. However, I need to make sure that the formula takes into account scenarios where the "guests included" is less than the "accommodates", because I must assume that each booking always has two guests except for when the listing only accommodates one person.
How should this formula be written? Can I not create equations within nested if formulas if it includes adding, subtracting, dividing, or multiplying columns together?
To clarify the previous response a bit more, the structuring of IFstatements is important. Keep in mind the structure of the function: =IF(logical test, value if true, value if false). So, the second IF function (the first nested) needs to be placed where the first "value if false" comes in - each additional IF needs to be within the previous IF function. Using your example, the corrected form would be =IF(W4=Q4,V4,IF(W4<Q4,Q4*V4...)). I'm not sure what the "+X4" is supposed to be adding to, but this hopefully makes the structure clearer for you to work with. Good luck!
I've done some Googling for each of my issues but haven't found exactly the results as I wanted. Things I need to be done doesn’t probably include any macros/VBA skills, just basic knowledge of Excel.
Now to my spreadsheet. I'm a Dota 2 player and I like statistics. I like it that much that I'd like to keep track of my achievements and results. Only problem is that the game tracker sucks and to get great information in web you have to pay for it, so I decided it's time for me to create my own spreadsheet to track my skills.
I don't know which place is the best to share my spreadsheet but I uploaded it to Estonian uploading host, link is here. I will also provide with pictures so you don't have to download anything.
This is what it looks like in general:
Problem number 1: The left table, or column has 1000 rows. In web design it's possible to make elements fixed depending on the scroll, I'd like to use similar feature here. If the table gets scrolled down, the right table (area with games, bonus and graph) will get scrolled down with it.
Problem number 2: Average MMR. I'd like to show average MMR after each entry depending on the first entries. Right now there's avg MMR for J4:J8. The calculation for J8 looks like this: =AVERAGE(C4:C8). For J7 it looks like this: =AVERAGE(C4:C7). I'd like to do this for all my 1000 rows, but I don't want to type it out. If I try to drag down from the corner, it will continue with C5:C8, C6:C9 etc (so it changes the starting point)
Problem number 3: Under longestGame there's currently Date and Hero. This should show the Date and Hero of which the longest game occurred. I tried to do this with LOOKUP function but it required table to be in ascending order, which I don't want. For current, 44,22, there should be Storm Spirit and 14.06.2015.
Problem number 4: Graph. I'd like to display three series on graph - MMR, average MMR and game length (time). The problem is, that MMR and average MMR will be in the numbers on 3000-7000 but the game length will only be probably in timeframe 20:00-120:00. Maybe it's possible to add two sets of values to the Y axis or maybe set Time series maximum 200:00 and minimum 0:00 and create graph according to this. I'm really stupid making graphs and I haven't figured out a clever way yet.
Problem number 5: Graph again. Right now I have to set the series for the graph. I've currently set it to C4:C54 (so 50 rows). I'd like it to move around a bit and by that I mean that if there happens to be C55-th game then the graph would start from C5:C55 and move along (so it'll count 50 last games).
I'm in a benevolent mood so rather than downvoting your question, because it is not really suitable for this forum I'm going to give you some hints and guidance. The numbers below correspond to the problems in your question.
Excel permits more than one window to be used on the same workbook -
so one window can show the data and one the summary.
Find out about absolute and relative cell addressing - its a valuable bit of knowledge for anyone serious about Excel and it will be of use in solving your problem.
Find out about the MATCH function. You can use this to find out which row of your table contains the longest game, shortest game, max MMR, min MMR by matching an element from the summary on the right (cols M onward) against the appropriate column table on the left. The find out about the INDEX function - this can be used to pull the values in the columns for Hero and Date which correspond to a specific row (such as the row containing the longest game, shortest game, etc). Search INDEX MATCH and find out why using these two functions in combination is often preferred to using the VLOOKUP function
Persevere - there are graph options available to do what you want and the only way to really learn is to go through the pain of trying them out, failing and working at it until you succeed.
Set up an area of worksheet to hold the 50*3 table of data for your graphs. Find out about the COUNT function and think how it might be of use in determining which rows of the data table map to the 50 rows of graph data. Then think about how to populate the graph data table using one of the functions mentioned above. Incidentally, C4:C54 is actually 51 rows, not 50.