I have CSV columns that I'm working with:
info,example-string,super-example-string,otherinfo
I would like to get:
example-string super example string
Right now, I'm running the following command:
awk -F ',' '{print $3}' | sed "s/-//g"
But, then I have to paste the lines together to combine $2 and $3.
Is there anyway to do something like this?
awk -F ',' '{print $2" "$3}' | sed "s/-//g"
Except, where the sed command is only performed on $3 and $2 stays in place? I'm just concerned later on if the lines don't match up, the data could be misaligned.
Please note: I need to keep the pipe for the SED command. I just used a simple example but I end up running a lot of commands after that as well.
Try:
$ awk -F, '{gsub(/-/," ",$3); print $2,$3}' file
example-string super example string
How it works
-F,
This tells awk to use a comma as the field separator.
gsub(/-/," ",$3)
This replaces all - in field 3 with spaces.
print $2,$3
This prints fields 2 and 3.
Examples using pipelines
$ echo 'info,example-string,super-example-string,otherinfo' | awk -F, '{gsub(/-/," ",$3); print $2,$3}'
example-string super example string
In a pipeline with sed:
$ echo 'info,example-string,super-example-string,otherinfo' | awk -F, '{gsub(/-/," ",$3); print $2,$3}' | sed 's/string/String/g'
example-String super example String
Though best solution will be either use a single sed or use single awk. Since you have requested to use awk and sed solution so providing this. Also considering your actual data will be same as shown sample Input_file.
awk -F, '{print $2,$3}' Input_file | sed 's/\([^ ]*\)\([^-]*\)-\([^-]*\)-\([^-]*\)/\1 \2 \3 \4/'
Output will be as follows.
example-string super example string
Related
I am trying to change the column names to lowercase in a csv file. I found the code to do that online but I dont know how to replace the old column names(uppercase) with new column names(lowercase) in the original file. I did something like this:
$cat head -n1 xxx.csv | tr "[A-Z]" "[a-z]"
But it simply just prints out the column names in lowercase, which is not enough for me.
I tried to add sed -i but it did not do any good. Thanks!!
Using awk (readability winner) :
concise way:
awk 'NR==1{print tolower($0);next}1' file.csv
or using ternary operator:
awk '{print (NR==1) ? tolower($0): $0}' file.csv
or using if/else statements:
awk '{if (NR==1) {print tolower($0)} else {print $0}}' file.csv
To change the file for real:
awk 'NR==1{print tolower($0);next}1' file.csv | tee /tmp/temp
mv /tmp/temp file.csv
For your information, sed using the in place edit switch -i do the same: it use a temporary file under the hood.
You can check this by using :
strace -f -s 800 sed -i'' '...' file
Using perl:
perl -i -pe '$_=lc() if $.==1' file.csv
It replace the file on the fly with -i switch
You can use sed to tell it to replace the first line with all lower-case and then print the rest as-is:
sed '1s/.*/\L&/' ./xxx.csv
Redirect the output or use -i to do an in-place edit.
Proof of Concept
$ echo -e "COL1,COL2,COL3\nFoO,bAr,baZ" | sed '1s/.*/\L&/'
col1,col2,col3
FoO,bAr,baZ
I need to grep some pattern and further i need to print some output within that. Currently I am using the below command which is working fine. But I like to eliminate using multiple pipe and want to use single awk command to achieve the same output. Is there a way to do it using awk?
root#Server1 # cat file
Jenny:Mon,Tue,Wed:Morning
David:Thu,Fri,Sat:Evening
root#Server1 # awk '/Jenny/ {print $0}' file | awk -F ":" '{ print $2 }' | awk -F "," '{ print $1 }'
Mon
I want to get this output using single awk command. Any help?
You can try something like:
awk -F: '/Jenny/ {split($2,a,","); print a[1]}' file
Try this
awk -F'[:,]+' '/Jenny/{print $2}' file.txt
It is using muliple -F value inside the [ ]
The + means one or more since it is treated as a regex.
For this particular job, I find grep to be slightly more robust.
Unless your company has a policy not to hire people named Eve.
(Try it out if you don't understand.)
grep -oP '^[^:]*Jenny[^:]*:\K[^,:]+' file
Or to do a whole-word match:
grep -oP '^[^:]*\bJenny\b[^:]*:\K[^,:]+' file
Or when you are confident that "Jenny" is the full name:
grep -oP '^Jenny:\K[^,:]+' file
Output:
Mon
Explanation:
The stuff up until \K speaks for itself: it selects the line(s) with the desired name.
[^,:]+ captures the day of week (in this case Mon).
\K cuts off everything preceding Mon.
-o cuts off anything following Mon.
I'm trying to take a column and pipe it through an echo command. If possible, I would like to keep it in one line or do this as efficiently as possible. While researching, I found that I have to use single quotes to expand the variable and to escape the double quotes.
Here's what I was trying:
awk -F ',' '{print $2}' file1.txt | while read line; do echo "<href=\"'${i}'\">'${i}'</a>"; done
But, I keep getting the number of lines than the single line's output. If you know how to caputure each line in field 4, that would be so helpful.
File1.txt:
Hello,http://example1.com
Hello,http://example2.com
Hello,http://example3.com
Desired output:
<href="http://example1.com">http://example1.com</a>
<href="http://example2.com">http://example2.com</a>
<href="http://example3.com">http://example3.com</a>
$ awk -F, '{printf "<href=\"%s\">%s</a>\n", $2, $2}' file
<href="http://example1.com">http://example1.com</a>
<href="http://example2.com">http://example2.com</a>
<href="http://example3.com">http://example3.com</a>
Or slightly briefer but less robustly:
$ sed 's/.*,\(.*\)/<href="\1">\1<\/a>/' file
<href="http://example1.com">http://example1.com</a>
<href="http://example2.com">http://example2.com</a>
<href="http://example3.com">http://example3.com</a>
can I use awk to extract the first column or any column on a string?
Actually i am using a file and reading it to a variable I want to use AWK on that variable and do my job.
How is it possible? Any suggestions.
Print first column*:
<some output producing command> | awk '{print $1}'
Print second column:
<some output producing command> | awk '{print $2}'
etc.
Where <some output producing command> is like cat filename.txt or echo $VAR, etc.
e.g. ls -l | awk '{print $9}' extracts the ninth column, which is like an ... awkward way of ls -1
*Columns are defined by the separating whitespace.
EDIT: If your text is already in a variable, something like:
VAR2=$(echo $VAR | awk '{print $9}')
would work, provided you change 9 to the desired column.
I have a file with the following layout:
123,01-08-2006
124,01-09-2007
125,01-10-2009
126,01-12-2010
How can I convert it into the following by using AWK?
123,2006-08-01
124,2007-09-01
125,2009-10-01
126,2009-12-01
Didn't read the question properly the first time. You need a field separator that can be either a dash or a comma. Once you have that you can use the dash as an output field separator (as it's the most common) and fake the comma using concatenation:
awk -F',|-' 'OFS="-" {print $1 "," $4,$3,$2}' file
Pure awk
awk -F"," '{ n=split($2,b,"-");$2=b[3]"-"b[2]"-"b[1];$i=$1","$2 } 1' file
sed
sed -r 's/(^.[^,]*,)([0-9]{2})-([0-9]{2})-([0-9]{4})/\1\4-\3-\2/' file
sed 's/\(^.[^,]*,\)\([0-9][0-9]\)-\([0-9][0-9]\)-\([0-9]\+\)/\1\4-\3-\2/' file
Bash
#!/bin/bash
while IFS="," read -r a b
do
IFS="-"
set -- $b
echo "$a,$3-$2-$1"
done <"file"
Unfortunately, I think standard awk only allows one field separator character so you'll have to pre-process the data. You can do this with tr but if you really want an awk-only solution, use:
pax> echo '123,01-08-2006
124,01-09-2007
125,01-10-2009
126,01-12-2010' | awk -F, '{print $1"-"$2}' | awk -F- '{print $1","$4"-"$3"-"$2}'
This outputs:
123,2006-08-01
124,2007-09-01
125,2009-10-01
126,2010-12-01
as desired.
The first awk changes the , characters to - so that you have four fields separated with the same character (this is the bit I'd usually use tr ',' '-' for).
The second awk prints them out in the order you specified, correcting the field separators at the same time.
If you're using an awk implementation that allows multiple FS characters, you can use something like:
gawk -F ',|-' '{print $1","$4"-"$3"-"$2}'
If it doesn't need to be awk, you could use Perl too:
$ perl -nle 'print "$1,$4-$3-$2" while (/(\d{3}),(\d{2})-(\d{2})-(\d{4})\s*/g)' < file.txt