Is there any way to migrate Azure SQL server/database from one geographical region to another region? Thanks.
You can use Geo-replication to create a replica of your actual databases on the new desired region, then you can failover all of them making databases on the new region the primary databases, now you can drop all secondary databases on the old original region. You can learn about setting up Geo-replication using Azure portal here.
Another option is to copy the databases to a server located on the desired region using the Copy Database feature as explained here.
A third option is exporting the database to a blob storage as bacpac then import it to a SQL Azure server on the new region as explained here.
Finally, you can also use SQL Data Sync (as explained here) to copy databases to the new region on a new server, and keep the servers synchronized, then you can remove databases from the sync groups, remove SQL Data Sync and drop the original databases.
Hope this helps.
The official Azure documentation about moving SQL resources across regions.
Related
what is the best way to limit latency for SQL Azure in global applications?
My Application uses SQL Azure and would like to know based on the network location of users if its possible to connect SQL Azure near to users.
So Logically would need to have SQL Azure database with global replication but not geo-replication as each copy would serve as Master and not secondary.
Thank you in advance.
You may want to try CosmosDB to distribute data globally and obtain low latency as explained on this article and this documentation.
For replicating data using SQL Data Sync with Azure SQL Database, take in consideration paired regions which may reduce latency. With SQL Data Sync a hub database can be defined and many member database on another region, and data can be synched on both ways between the hub and any member database.
Is there any way to change the region for a Azure SQL server/database from one geographical region to another region?
I have a deleted database which I cannot restore as I get "MSDN subscriptions are restricted from provisioning in this region. Please choose a different region. For exceptions to this rule please contact Microsoft Support."
The Server was originally setup in US-West region with a VS MSDN Subscription.
To answer the ways to change region from Azure SQL database, there are mutiple options -
Configure active geo-replication for Azure SQL Database in the Azure portal and initiate failover
Copy an Azure SQL database
Export an Azure SQL database to a BACPAC file
Set up SQL Data Sync (Preview)
However, based on the error if there is limitation on specific region and you have strict requirement to have database in same region you may need to work with Azure support on it.
I need to mirror sync two azure DBs stored in two different azure accounts (so different subscription also different azure enterprise accounts as well); the DB is Azure DB not SQL Server in azure VM.
the DBs are in the same geo area.
how can this be achieved?
thank you
The Answer is no,you can't have mirroring between two SQLAzure databases even if they are in same region..
It seems that you are trying to keep two databases in sync which are in different regions and are under different subscriptions..This is not possible,only HA option SQLAzure supports is replication with onpremises as publisher and SQLAzure database as subscriber..
One more option you can use is Georeplication(only for premium ,last when i checked) which keeps one more database in sync, which can be in different region
I want to confirm our understanding of how our Azure SQL databases are being backed up to enable point in time restore. We have not currently configured geo-replication to have the database available in another region. We may in the future as some data analysis is done. But my understanding is that the database is still being backed up to a geo redundant location so I could do a geo-restore if there was an issue with the data center that houses my sql database. Is that correct or do I need to enable geo-replication and pay for a second database in order to have a disaster recover option if the datacenter had an issue.
To clarify further: I think this article states what I'm saying in the Geo-Restore section.
https://azure.microsoft.com/en-us/documentation/articles/sql-database-business-continuity/
Thanks
Yes, all databases have a geo-replicated copy for disaster recovery purposes. For more details, please see the following: https://azure.microsoft.com/en-us/blog/azure-sql-database-geo-restore/
Geo-restore uses the same technology as point in time restore with one
important difference. It restores the database from a copy of the most
recent daily backup in geo-replicated blob storage (RA-GRS). For each
active database, the service maintains a backup chain that includes a
weekly full backup, multiple daily differential backups, and
transaction logs saved every 5 minutes. These blobs are geo-replicated
this guarantees that daily backups are available even after a massive
failure in the primary region.
Yes, Azure SQL Databases are automatically backed up to a different Azure data center using Geo-Replication. This is an automatic features of Azure SQL that is baked into the service offering.
Here's a blog post with further information about Azure SQL Data Replication:
https://azure.microsoft.com/en-us/blog/azure-sql-database-standard-geo-replication/
I would like to transfer my existing SQL Azure location to other one, but I think there is no functionality right now to do so on the management portal of Azure.
I just googled it and found one link http://social.msdn.microsoft.com/Forums/en-US/ssdsgetstarted/thread/e6c961cc-5eea-4f07-82c9-a8805d367b05 that says I need to use the data sync option in Azure's portal but I don't have that feature enabled in my Azure portal.
Also if I do use that option, is there any charge for it? Finally, are there any other option that is possible for moving the SQL Azure location?
To Move an Existing SQL Server Database to a New Region on Azure Assuming There Are No Blob Containers Associated With the Database. For further reference see:
https://azure.microsoft.com/en-us/blog/migrating-azure-services-to-new-regions/
Upgrade the database, if necessary, to one of the Premium pricing tiers
Add geo-replication to the existing database. You can choose what region to have the backup of the existing database. Create a new Database server in the target region of your choice. I suggest provisioning that new database server with the same admin username and password as the existing sql database. When creating the secondary database, I suggest making the Secondary type “Readable” as it will allow you the ability to check that all data and schemas were replicated correctly.
Allow the two databases time to sync. Rule of thumb according from Microsoft AzureCAT is: 3 * (5 minutes + database size / 150 MB/minute)
Configure the Firewall settings of the secondary database to allow the necessary IP addresses to access the database
Temporarily shut down whatever users or applications are accessing the existing database.
From the Azure portal select the existing database and change its geo-replication role from primary to secondary.
Run any ddl scripts that rely on the masterdb such as ddl scripts to recreate users and user profiles
Change the connection strings of any applications to point to the new database.
Users and applications can now connect to the new Database
At your discretion you can remove the old database as a backup and add any new regions as backup.
In terms of charges there will be charges for upgrading the old database if it isn't already a premium database. There will also be charges for creating the geo-replicated database. However, those charges can be limited to a day to a few days worth of fees (depending on how long geo-replication takes). Once the new database is up and running, delete the old database as soon as possible to limit additional fees. Finally, if you upgraded the service level of the old database to a premium tier to facilitate the geo-replication, you will want to downgrade the new database to the original service level of the old database to also limit fees.
I think you can use new Import/Export bacpac feature. I have used it to move databases between accounts and can't see why it wouldn't also work between regions.
See how here
If you are able to stop writes to the DB for a time then you can use the Copy feature on the Azure Portal.
Create a new SQL Server in the region of your choosing.
Add your service(s) IP addresses to the new SQL Server firewall.
Stop writes to the origin database.
Open the origin database in the Azure Portal and click Copy at the top of the blade.
Choose your new SQL server located in the destination region.
Wait for the copy to complete.
Update your service(s) to point to the destination DB.
Enable DB writes.
Verify everything is working.
Delete origin database (and server if it was the only DB on the server).
I wouldn't use DataSynch because it creates many objects in your database to perform synchronization (it's an invasive solution). You can indeed try the Import/Export feature; that should work fine. You can also download a trial version of the Enzo backup tool, which comes with a 30-day free trial: http://www.bluesyntax.net/backup.aspx. [disclaimer: I am the author of this tool]
Regarding the pricing question, you may be charged for data being extracted out of the database. Moving data "in" SQL Azure is free of charge for now. If you are transferring the data to a different data center, you will be charged for extracting the data. It's 15 cents per GB in the US and Europe, and 20 cents in Asia. Here are the pricing details: http://www.microsoft.com/windowsazure/pricing/
Keep in mind that a database that requires 4GB of storage doesn't mean you have 4GB of data. Sometimes indexes can take a lot of space. To estimate the size of the data you will need to transfer you can either drop your indexes (and wait a little for the database size to shrink; the database size should be roughly equal to your data transfer needs) or you can calculate the size of your tables by running a command. Here is a link to an article that shows how to do something similar (look at the second command with is a SELECT statement; just run it for all the tables): http://www.sqldocumentor.com/table-size-in-sql-server-find-rows-and-disk-space-usage
Azure has released a new tool called Azure Resource Mover.
Resource mover can for now handle these resources:
Azure VMs and associated disks
NICs
Availability sets
Azure virtual networks
Public IP addresses
Network security groups (NSGs)
Internal and public load balancers
Azure SQL databases and elastic pools
https://learn.microsoft.com/en-us/azure/resource-mover/move-region-within-resource-group
Azure SQL Server is not supported yet but Azure has a complete guide for this anyway:
https://learn.microsoft.com/en-us/azure/resource-mover/tutorial-move-region-sql#move-the-sql-server