I installed CF 11 on Windows 10 Professional using IIS option as shown below. But when I go to IIS I don't see CFIDE folder there:
I thought the CF installation process would have created a CFIDE folder in IIS with its subfolder Administrator that points to the Administrator URL. But IIS did have any such folder. If I remember in Windows 7, installing CF 11 with IIS option automatically configure Administrator website in IIS - at least that what I recall I had done in Win7.
So I manually added a virtual directory in IIS and named it CFIDE with physical path as C:\ColdFusion11\cfusion\wwwroot\CFIDE that is a correct path on my system. But when I go to http://localhost/CFIDE/administrator/ or go to All Programs-->Adobe-->Administrator in Windows, I get the following error. Please help:
CF11 was initially not supported for windows 10. One of the recent update of CF11 started supporting Windows 10. You would need to install ColdFusion and Select Built in Web server while installing ColdFusion. Once its installed, apply the latest update from CF admin and re-configure the IIS connector using Web server Configuration tool.
OR
Apply the latest update manually:
http://coldfusionx.blogspot.in/2017/07/how-to-install-coldfusion-updates.html
And re-configure the IIS connector.
Related
after installing ARR module and URL rewrite in IIS 10 (Windows Server 2016) the icon for ARR configuration don't appear. (s. screenshot)
Of course, I tried already several restarts of the machine.
Any help will be appreciated.
Greets.
Perhaps something off with your install? When I installed ARR on IIS 10 the icon came up right away without any restarts.
Did you stop the IIS service first?
net stop was /y
Did you install the IIS 10 ARR dependencies first?
According to this page (see "Install Instructions"):
ARR is dependent on several components:
URL Rewrite
External Cache module
In a nutshell, this worked for me:
net stop was /y
Install the URL Rewrite module. It should install
without any problem.
Install the External Cache module, it will complain when
installed on IIS 10 and demand only IIS 7. This can be handled by
updating the IIS version registry key HKLM:\Software\Microsoft\InetStp\MajorVersion from 10 to 7, then do the
install, then reverting it back to 10.
Finally, install the latest ARR module (v3.0 currently).
net start was /y
net start w3svc /y
The issue is actually with the Web Platform installer. When you add ARR 3.0 and click install it will say that it installed the ARR and it prerequisites however I discovered that was not the case. It did install URL Rewrite and it did install External cache plugins but it did not complete (or correctly at least) the ARR install.
The solution for me was to go back to WPI, select the ARR 3.0 to Add it again and run the install again.
Then close the IIS Manager, run iisreset (I did it just as a precaution) and open IIS Manager again. You should see the Application Request Routing Cache icon under IIS section within your server node (Features tab -> IIS section).
Now, this is misleading because it is not only cache behind this icon, it is also the proxy feature. Open the feature (double click) and you should see cache settings. The proxy feature however, is located on the right hand side under Actions - Proxy - Server Proxy Settings. Click that link and there you now have an option to enable the (reverse) proxy feature of ARR.
HTH
I have develop JSP-Servlert application (i.e. WAR file) which running perfectly on tomcat server. Now I want to run same web application on IIS without tomcat.
Currently I am following this url: http://www.helicontech.com/articles/deploying-java-servlet-applications-on-windows-with-iis/
But while configuring Java hosting package as per mentioned in the above article, it is giving error to download jetty 8. Other softwares from the same package is getting download and install successfully.
When I checked the logs, I found that it is downloading the jetty from the URL: "http://dist.codehaus.org/jetty/jetty-hightide-8.1.7/jetty-hightide-8.1.7.v20120910.zip" and all the codehaus services has shutdown.
Can anyone help me to install the jetty into IIS or any other option to deploy the WAR into IIS?
Thanks,
SameerK
Definately the easiest option, at the time of writing, is to use Microsoft's HttpPlatformHandler that you can install on IIS 8+ (Windows 8 or Windows Server 2012 at least).
You basically need to:
Install IIS on your machine
Install JDK
Install Jetty on Windows (just download zip and unpack it)
Create WAR file
Copy WAR file to your Jetty's installation folder under webapps directory.
Set up IIS web site with web.config as described here.
That's it. You can view your site using http://localhost:your_iis_defined_port/your_war_name. If you rename your WAR to root.war then 'your_war_name' will not be necessary.
I have prepared a step by step guide on how to do that with more explanation.
After hours of trying i managed it by adding a ReverseProxy Rule, this is fairly easy and done super fast.
I had these dependencies installed already: AAR and HttpProxyHandler
I have windows server 2012 and I have installed the IIS 8.5 but I could not see the URL rewrite module. How can I enable or install?
Download it from here:
http://www.iis.net/downloads/microsoft/url-rewrite
or if you already have Web Platform Installer on your machine you can install it from there.
Worth mentioning: you should download the x64 version!
From the main download page (https://www.iis.net/downloads/microsoft/url-rewrite) click "additional downloads" (under the main download button) and download the x64 version (because for some reason - the default download version is x86)
First, install the URL Rewrite from a download or from the Web Platform Installer. Second, restart IIS. And, finally, close IIS and open again. The last step worked for me.
Thought I'd give a full answer combining some of the possible intricacies required for completeness.
Check if you have 32-bit or 64-bit IIS installed:
Go to IIS Manager → Application Pools, choose the appropriate app pool then Advanced Settings.
Check the setting "Enable 32-bit Applications". If that's true, that means the worker process is forced to run in 32-bit. If the
setting is false, then the app pool is running in 64-bit mode.
You can also open up Task Manager and check w3wp.exe. If it's showing as w3wp*32.exe then it's 32-bit.
Download the appropriate version here: https://www.iis.net/downloads/microsoft/url-rewrite#additionalDownloads.
Install it.
Close and reopen IIS Manager to ensure the URL Rewrite module appears.
I have Eclipse Juno with Spring Tools Suite plugin installed.
I need to deploy a newly imported web project to Tomcat 7, which I installed on my system via repository.
The problem is that the New Server Wizard screen won't allow me to select Tomcat 7, as the description is empty and unmodifiable.
How can I fix this? I can select other versions of Tomcat but when I select the installation path of Tomcat I get an error that the installed version is 7.
As per the instruction s provided in this site
Follow these steps, as this is a known issue
Go to Window–>Preferences–>Server–>Runtime Environments and fix the broken path/link for the server.
Rename the org.eclipse.jst.server.tomcat.core.prefs to org.eclipse.jst.server.tomcat.core.prefs.bak (or you can delete this file). This file can be found at \workspace\.metadata\.plugins\org.eclipse.core.runtime\.settings
Rename the org.eclipse.wst.server.core.prefs to org.eclipse.wst.server.core.prefs.bak (or delete the file). This file also can be found at the same location as above.
Follow these steps
1.)Go to Window–>Preferences–>Server–>Runtime Environments and fix the broken path/link for the server.
2.)delete this file org.eclipse.jst.server.tomcat.core.prefs under this location \workspace\.metadata\.plugins\org.eclipse.core.runtime\.settings
3.)delete this file org.eclipse.wst.server.core.prefs under this location \workspace\.metadata\.plugins\org.eclipse.core.runtime\.settings
After following these step's you can configure tomcat in eclipse.
Click on Add Configuration Runtime environments
On the Server Runtime Environments Window you will more than likely see Apache Tomcat 7.
If you remove the runtime environment and then go Back to the New Server Wizard Tomcat 7 will be available to add again.
Hope that helps. That drove me nuts for a few days
The Eclipse Juno may not be fully compatible with the Apache Tomcat 7 yet. Installing and configuring with Tomcat 6 works. Simple.
I have genuine Windows 7 Home Basic on my Dell laptop. However IIS isn't getting installed here.
Is it something this version of Windows 7 can support?
If yes, please let me know how can I get this installed on my OS?
I think IIS Express should work. New version of IIS for development that just shipped with MVC3.
http://weblogs.asp.net/scottgu/archive/2010/06/28/introducing-iis-express.aspx
IIS install on home premium it is not installed in home basic .U have to upgrade your os to Home Premium