I'm working on a side project that connects to a phone using Bluetooth. I was going to try to get the number of the connected phone using the HFP Subscriber Number Information command (AT+CNUM). How reliable is this way of getting phone number information. Does it work on most phones or is the implementation patchy. I'd love to get an answer for someone who has implemented this for a real world product.
Related
I am trying to make it so that my ESP32 board can detect my phone when I approach it based on RSSI. However, the ESP32 cannot see the phone unless the phone is in discovery mode, which is not super useful. To solve this, I was hoping to pair my phone with the ESP32 so that the phone would always be looking for the ESP32, and connect when it is found without any human intervention.
I decided to try the Arduino integration, but as I was working through all of the examples I couldn't find any with this functionality, so I'm kind of lost. If this is not possible or easy with Arduino, I am willing to switch, but I was unable to find anything about pairing in the normal phone interface for ESP-IDF either.
So, basically, using an ESP32, how do I pair to a phone?
The easiest way is to make the esp a gatt server and advertise a specific service. The phone will look for that specific service and connects if found.
You could make an app for your phone, like for ios its pretty easy. But keep in mind for mobile devices a continuous search for devices could be power unfriendly if misused.
If you use esp-idf instead of arduino, some examples are included. (You could use the vscode integrated esp-idd) Check learnesp32.com for an easy step into the basics, coming from Arduino.
I am trying to build a system with a raspberry pi that allows clients access into a building depending on their membership status. Right now, it uses QR codes, but I want to know if it is possible to add a feature where it uses some technology like NFC or RFID or Bluetooth to detect their phone or RFID card from at least a foot away and confirm they have a membership.
Someone told me I could use RFID, but I am only aware of that being used in short-distance applications, like a card on a hotel door. I am not sure about Bluetooth either, because the phone would have to connect to the pi first, right? Maybe there is something I don't know about. So please offer any suggestions. Thanks
I think bluetooth does good work for tracking user. Since it's the best to handle large distances than NFC and RFID these two technologies are used for low range scenarios, check this link.
In addition, you can check distance(using Proximity and RSSI) and membership status as well. but you need to know how to handle bluetooth connectivity with raspberry pi check this link. as well create an app on that mobile phone to use Bluetooth (depending which OS you're using for Android, iOS).
Regards,
Is it possible to track bluetooth connections that are connected to eachother? and if yes, is it possible to see that they're sharing files/sending data with bluetooth?
It is for a personal chat program, that me and my friends are working on in C#.
The Bluetooth devices and related status can be found using APIs of Windows.Devices.Enumeration namespace that are available for C#. They shall help in getting general information about devices connected to or discoverable by the system. It shall help in finding devices internally connected to the system, externally connected, or nearby over wireless or networking protocols and get information about them. The DeviceWatcher in turn shall help in finding and receiving updates for devices (like getting notifications when devices get added, connected, disconnected, change online status, or change other properties.)
I want to write an application which will be a bridge between VoIP app and phone line.
E.G.:
- I am writing in Skype to user XXX "call to ******"
- User XXX call me back and by phone modem calling to ******
- So I can speak throw my VoIP and phone modem for free (except internet and phone fees)
I thought to use something like this.
The better description is here in Calling section.
But it is outdated and my server part is on Ubuntu
Could you please advice VoIP (e.g. Skype, Viber, WhatsApp, etc) which I can use for such purpose? It would be great to have a client on Android Phone and server on Ubuntu.
Thank a lot,
If I have well understood, the use case is:
A wants to call B through an application running in a mobile device
B has a phone land or mobile line, but not a VoIP one to receive the call.
Bridge between internet and phone lines is to be done at home (A's home) without specific subscription costs, that is to say, without the services of a VoIP provider (I should like here to suggest rethinking the use of a well stablished solution as costs to call phone lines from IP can be really cheap).
Well, there is a lot of solutions for this scenario. I am going to speak about one of them that I consider interesting because it opens the way to a lot of additional communication services.
First, the softphone. To make and receive calls, A will need an application in his or her device. Consider a softphone as Zoiper or Jitsi Meet.
Then, the gateway between VoIp and phone lines. Asterisk can do the work as a SIP server. It is a lightweight linux software with a lot of features. It can switch VoIP lines with land phone lines via FXS - FXO cards (if the phone lines are analogue ones), ISDN cards, VoIP interfaces, bluetooth using mobile devices, etc.
Last, but not least, the connection. Ok, you do not want to expose your gateway to the dangers of all those wicked people of internet, eager to stole your phone line minutes. Connection between mobile and server could be done using a VPN (e.g. OpenVPN), or through a web app (SIP on top of WebRTC).
Once you have the asterisk working at home, you could use it as an answering machine sending email messages with the received audio, as (if your local regulations allow it) a recorder, as an IVR or as a part of a security system, calling sequencially phone numbers in case of emergency.
I want to send almost 4k size data to any cellphone by using bluetooth.
Firstly to do this, I need to find what stacks are in my phone and what stacks are acting when I send a data.
I really struggle to find the way; however, it is really hard.
If you know how to find it, please give me some information!!
See http://32feet.NET if you are talking about Windows Mobile. It is a managed library for Bluetooth, OBEX, and IrDA. We support both the Microsoft stack, but also have support for Widcomm. And now also Bluesoleil and Stonestreet One Bluetopia.
You can either send and receive the data as an OBEX message, or over a simple bluetooth connection. See a copy of the user's guide at http://www.alanjmcf.me.uk/comms/bluetooth/32feet.NET%20—%20User’s%20Guide.html
Goto "https://www.bluetooth.org/tpg/listings.cfm" type the name of your mobile. This will give you information on the Bluetooth stack inside and the profiles supported.