I have installed Jenkins on windows box and when I try to add a Linux slave machine I am getting an error like below.
Does anyone have any idea why this error occurs ?
[05/31/17 04:05:13] [SSH] Opening SSH connection to sdc00ira:22.
C:\Windows\system32\config\systemprofile\.ssh\known_hosts [SSH] No Known Hosts file was found at C:\Windows\system32\config\systemprofile\.ssh\known_hosts. Please ensure one is created at this path and that Jenkins can read it.
Key exchange was not finished, connection is closed.
java.io.IOException: There was a problem while connecting to sdc00ira:22
at com.trilead.ssh2.Connection.connect(Connection.java:818)
at com.trilead.ssh2.Connection.connect(Connection.java:687)
at com.trilead.ssh2.Connection.connect(Connection.java:601)
at hudson.plugins.sshslaves.SSHLauncher.openConnection(SSHLauncher.java:1265)
at hudson.plugins.sshslaves.SSHLauncher$2.call(SSHLauncher.java:790)
at hudson.plugins.sshslaves.SSHLauncher$2.call(SSHLauncher.java:785)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: Key exchange was not finished, connection is closed.
at com.trilead.ssh2.transport.KexManager.getOrWaitForConnectionInfo(KexManager.java:93)
at com.trilead.ssh2.transport.TransportManager.getConnectionInfo(TransportManager.java:230)
at com.trilead.ssh2.Connection.connect(Connection.java:770)
... 9 more
Caused by: java.io.IOException: The server hostkey was not accepted by the verifier callback
at com.trilead.ssh2.transport.KexManager.handleMessage(KexManager.java:535)
at com.trilead.ssh2.transport.TransportManager.receiveLoop(TransportManager.java:777)
at com.trilead.ssh2.transport.TransportManager$1.run(TransportManager.java:489)
... 1 more
[05/31/17 04:05:13] Launch failed - cleaning up connection
[05/31/17 04:05:13] [SSH] Connection closed.
What works for me is to change "Host Key Verification Strategy" from "Known Hosts file verification strategy" to "Manually trusted key verification strategy" in node configure.
Related
I'm trying to configure the Mylyn Gitlab Connector for Eclipse Oxygen v4.7.1a but when I try to add a new task it throws me an exception and it does not let me continue with the creation of the new task.
Enter correctly my data and the url address of the gitlab repository and even probe with several url and with all of them throw me the same exception.
Exception Stack Trace:
java.lang.reflect.InvocationTargetException
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:398)
at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:980)
at org.eclipse.mylyn.tasks.ui.wizards.NewTaskWizard.performFinish(NewTaskWizard.java:113)
at org.eclipse.mylyn.internal.tasks.ui.wizards.SelectRepositoryPage.performFinish(SelectRepositoryPage.java:295)
at org.eclipse.mylyn.internal.tasks.ui.wizards.MultiRepositoryAwareWizard.performFinish(MultiRepositoryAwareWizard.java:53)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:778)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:417)
at org.eclipse.jface.dialogs.Dialog.lambda$0(Dialog.java:619)
at org.eclipse.swt.events.SelectionListener$1.widgetSelected(SelectionListener.java:81)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:249)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:86)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:5268)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1348)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4522)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:4107)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:818)
at org.eclipse.jface.window.Window.open(Window.java:794)
at org.eclipse.mylyn.tasks.ui.TasksUiUtil.openNewTaskEditor(TasksUiUtil.java:237)
at org.eclipse.mylyn.tasks.ui.TasksUiUtil.openNewTaskEditor(TasksUiUtil.java:253)
at org.eclipse.mylyn.internal.tasks.ui.actions.NewTaskAction.run(NewTaskAction.java:95)
at org.eclipse.mylyn.internal.tasks.ui.actions.NewTaskAction.run(NewTaskAction.java:102)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:247)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:565)
at org.eclipse.jface.action.ActionContributionItem.lambda$4(ActionContributionItem.java:397)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:86)
at org.eclipse.swt.widgets.Display.sendEvent(Display.java:5268)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1348)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4522)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:4107)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$5.run(PartRenderingEngine.java:1150)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:336)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:1039)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:153)
at org.eclipse.ui.internal.Workbench.lambda$3(Workbench.java:680)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:336)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:594)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:148)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:151)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:134)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:104)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:388)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:243)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:653)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:590)
at org.eclipse.equinox.launcher.Main.run(Main.java:1499)
at org.eclipse.equinox.launcher.Main.main(Main.java:1472)
Caused by: java.lang.Error: de.weingardt.mylyn.gitlab.core.exceptions.GitlabException: Invalid path in host
at de.weingardt.mylyn.gitlab.core.GitlabTaskDataHandler.getAttributeMapper(GitlabTaskDataHandler.java:67)
at org.eclipse.mylyn.internal.tasks.ui.util.TasksUiInternal.createTaskData(TasksUiInternal.java:872)
at org.eclipse.mylyn.tasks.ui.wizards.NewTaskWizard$1.run(NewTaskWizard.java:103)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:119)
Caused by: de.weingardt.mylyn.gitlab.core.exceptions.GitlabException: Invalid path in host
at de.weingardt.mylyn.gitlab.core.exceptions.GitlabExceptionHandler.handle(GitlabExceptionHandler.java:20)
at de.weingardt.mylyn.gitlab.core.ConnectionManager.validate(ConnectionManager.java:139)
at de.weingardt.mylyn.gitlab.core.ConnectionManager.get(ConnectionManager.java:159)
at de.weingardt.mylyn.gitlab.core.ConnectionManager.get(ConnectionManager.java:45)
at de.weingardt.mylyn.gitlab.core.GitlabTaskDataHandler.getAttributeMapper(GitlabTaskDataHandler.java:65)
... 3 more
Any suggestions on how to solve this problem?
Right click on Mylyn repository and select Repository -> Properties
Expand Additional Settings and check "Use private token"
works well for me.
Eclipse Oxygen.2 Release (4.7.2)
[2016-07-06 17:28:51,593] Lost notification. You should check server log for repair status of keyspace operations
Exception occurred during clean-up. java.lang.reflect.UndeclaredThrowableException
error: JMX connection closed. You should check server log for repair status of key space operations(Subsequent keyspaces are not going to be repaired).
-- StackTrace --
java.io.IOException: JMX connection closed. You should check server log for repair status of keyspace operations(Subsequent keyspaces are not going to be repaired).
at org.apache.cassandra.tools.RepairRunner.handleNotification(NodeProbe.ja va:1485)
at javax.management.NotificationBroadcasterSupport.handleNotification(Unkn own Source)
at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(Unknow n Source)
at javax.management.NotificationBroadcasterSupport$1.execute(Unknown Sourc e)
at javax.management.NotificationBroadcasterSupport.sendNotification(Unknow n Source)
at javax.management.remote.rmi.RMIConnector.sendNotification(Unknown Sourc e)
at javax.management.remote.rmi.RMIConnector.access$1200(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RMIClientCommunicatorAdmin.got IOException(Unknown Source)
at javax.management.remote.rmi.RMIConnector$RMINotifClient.fetchNotifs(Unk nown Source)
at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.fetchOneN otif(Unknown Source)
at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.fetchNoti fs(Unknown Source)
at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.doRun(Unk nown Source)
at com.sun.jmx.remote.internal.ClientNotifForwarder$NotifFetcher.run(Unkno wn Source)
at com.sun.jmx.remote.internal.ClientNotifForwarder$LinearExecutor$1.run(U nknown Source)
I have a problem integrating Sonarqube in the Build process with the Build-Tasks in Visualstudio Online.
My Konfiguration:
SonarQube 5.2 with LDAP using the Active Directory to Login in SonarQube
I use a reverse Proxy (IIS 8.5) as recommended on the Sonarqube homepage to access Sonarqube over a public Endpoint. This is nessacry because I use a public Build-Server, so that he can reach the Sonarqube Server.
I have no problem accessing Sonarqube over the Web. I got prompt for the credentials. I can login with my domainuser and browse without any Problems. If I use the private Endpoint I got login automatically. It seems to me that some informations for the login got lost over the reversed proxy.
Now the actual problem:
If I start a Build as mentioned bevor, I get the folowing error while the "End-Analyses" Task. The error occurs running the sonarrunner.
ERROR: Error during Sonar runner execution
org.sonar.runner.kevinsawicki.HttpRequest$HttpRequestException: java.net.SocketException: Connection reset
at org.sonar.runner.kevinsawicki.HttpRequest.code(HttpRequest.java:1392)
at org.sonar.runner.kevinsawicki.HttpRequest.ok(HttpRequest.java:1417)
at org.sonar.runner.impl.ServerConnection.downloadString(ServerConnection.java:93)
at org.sonar.runner.impl.ServerVersion.downloadVersion(ServerVersion.java:47)
at org.sonar.runner.impl.ServerVersion.version(ServerVersion.java:38)
at org.sonar.runner.impl.ServerVersion.is37Compatible(ServerVersion.java:58)
at org.sonar.runner.impl.JarDownloader.checkVersionAndDownload(JarDownloader.java:36)
at org.sonar.runner.impl.BatchLauncher$1.run(BatchLauncher.java:71)
at java.security.AccessController.doPrivileged(Native Method)
at org.sonar.runner.impl.BatchLauncher.doExecute(BatchLauncher.java:69)
at org.sonar.runner.impl.BatchLauncher.execute(BatchLauncher.java:50)
at org.sonar.runner.api.EmbeddedRunner.doExecute(EmbeddedRunner.java:102)
at org.sonar.runner.api.Runner.execute(Runner.java:100)
at org.sonar.runner.Main.executeTask(Main.java:70)
at org.sonar.runner.Main.execute(Main.java:59)
at org.sonar.runner.Main.main(Main.java:53)
Caused by: java.net.SocketException: Connection reset
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection$10.run(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection$10.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getResponseCode(Unknown Source)
at org.sonar.runner.kevinsawicki.HttpRequest.code(HttpRequest.java:1390)
... 15 more
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(Unknown Source)
at java.net.SocketInputStream.read(Unknown Source)
at sun.security.ssl.InputRecord.readFully(Unknown Source)
at sun.security.ssl.InputRecord.read(Unknown Source)
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream0(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getHeaderField(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getHeaderField(Unknown Source)
at org.sonar.runner.kevinsawicki.HttpRequest.header(HttpRequest.java:1903)
at org.sonar.runner.kevinsawicki.HttpRequest.contentType(HttpRequest.java:2308)
at org.sonar.runner.impl.ServerConnection.downloadString(ServerConnection.java:89)
... 13 more
ERROR:
ERROR: Re-run SonarQube Runner using the -X switch to enable full debug logging.
The sonar-runner did not complete successfully
I reserached a lot but can't find any solution for my problem. Can Someone help?
Edit:
If I use the the private Endpoint to integrate Sonarqube in the Build there are now Problems. in this case The Sonarqube Analyses works fine. But I need to get this work over the public endpoint using the reverse proxy redirecting to the local machine.
We are trying to run dalek on a Windows box with Jenkins.
We installed nodejs binary on the Windows box.
We installed the nodejs plugin on Jenkins.
When we run our job, we get this error:
[Test] $ C:\Windows\TEMP\hudson1848754731046994976.js
FATAL: command execution failed
java.io.IOException: Cannot run program "C:\Windows\TEMP\hudson1848754731046994976.js" (in directory "C:\jenkins\workspace\Test"): CreateProcess error=193, %1 is not a valid Win32 application
at java.lang.ProcessBuilder.start(Unknown Source)
at hudson.Proc$LocalProc.<init>(Proc.java:244)
at hudson.Proc$LocalProc.<init>(Proc.java:216)
at hudson.Launcher$LocalLauncher.launch(Launcher.java:763)
at hudson.Launcher$ProcStarter.start(Launcher.java:353)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:988)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:955)
at hudson.remoting.UserRequest.perform(UserRequest.java:118)
at hudson.remoting.UserRequest.perform(UserRequest.java:48)
at hudson.remoting.Request$2.run(Request.java:326)
at hudson.remoting.InterceptingExecutorService$1.call(InterceptingExecutorService.java:72)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at hudson.remoting.Engine$1$1.run(Engine.java:61)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: CreateProcess error=193, %1 is not a valid Win32 application
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(Unknown Source)
at java.lang.ProcessImpl.start(Unknown Source)
... 17 more
What does this error mean ?
Is there a workaround to get us to run dalekjs ?
Thanks
First, make sure that you have configured the nodejs installation path in jenkins. If it still doesn't work try to create a symlink folder called bin in your node installation path pointing to itself.
This was how I did it. Open a terminal and execute:
mklink /j "C:\Program Files\nodejs\bin" "C:\Program Files\nodejs"
Have you defined nodejs installation path in Jenkins configuration?
I'm getting exception while bulk loads with sstableloader. I'm using JDK 1.6.0_25 64bit, Ubuntu 12.04 server. Ipv6 is turned off. Network communication between hosts works correctly. I'm going crazy ;-(
Exception in thread "Streaming to /192.168.219.36:1" java.lang.RuntimeException: java.net.SocketException: Invalid argument or cannot assign requested address
at org.apache.cassandra.utils.FBUtilities.unchecked(FBUtilities.java:628)
at org.apache.cassandra.utils.WrappedRunnable.run(WrappedRunnable.java:34)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.net.SocketException: Invalid argument or cannot assign requested address
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:276)
at org.apache.cassandra.net.OutboundTcpConnectionPool.newSocket(OutboundTcpConnectionPool.java:96)
at org.apache.cassandra.streaming.FileStreamTask.connectAttempt(FileStreamTask.java:245)
at org.apache.cassandra.streaming.FileStreamTask.runMayThrow(FileStreamTask.java:91)
at org.apache.cassandra.utils.WrappedRunnable.run(WrappedRunnable.java:30)
All hosts runs Cassandra 1.1 (datastax edition). Ports 7000,7199,9160 opened. Any ideas ??
Why are you streaming to port 1? It should be the RPC_PORT and the default for that is 9160.
/192.168.219.36: 1
What params are you passing to the bulkloader?