I am trying to use umbraco with uCommerce.
I have implemented SecureTrading as Payment provider in uCommerce. Now I need a solution to use OrderNumber in place of OdrderGuid to be used to identify the PurchaseOrder.
Currently OrderGuid is being sento to SecureTrading & this is being displayed in SecureTrading Transactions section. And due to this identifying the order is really hard.
We have appropriate value in OrderNumber field of PurchaseOrder table & we want to Display that value in SecureTrading's Transaction section.
Any way to achieve this?
If I try to write my own payment provider code, it'll be very huge task, also we have set the SecureTrading environment accordingly to uCommerce default preference.
Immediate help is required.
For more Detail
I have developed a DLL for my own customization as menthioned in http://docs.ucommerce.net/ucommerce/v7.3/payment-providers/integrating-a-payment-gateway.html But, that also is not working. the custom Payment Provider added in code(DLL) is not visible in backoffice to change the Payment Provider. There are all old entries for providers.
Even nothing shows up in cms Admin section for uCommerce Settings.
Thanks
Hi you can create a derrived version of the PageBuilder which will send the parameters to SecureTrading.
There's a protected virtual method you can override called "GetParameters".
It returns a dictionary that holds everything that will be send to SecureTrading.
You can set the "orderreference" in the dictionary to OrderNumber. This originally holds the orderguid.
Don't forget to register your page builder in the IoC container.
http://docs.ucommerce.net/ucommerce/v7.5/extending-ucommerce/register-a-component.html
You need to override the component by reusing the ID that the page builder has, which is: "SecureTradingPageBuilder". When overriding the page builder you don't have to change anything in the back office.
This should fix your problem :)
Related
I have create a new custom view in Maximo DB, added it through the Database Configuration.
Created an application on top to display the data based on that view.
Added new signature option CREATEREPT to use default dialog to create reports (Ad Hoc Reports).
When I try to preview any report in that dialog, I get the following error
BMXAA8093E - The report could not be created and the cause of the
error cannot be determined. Try to create the report again, or contact
your system administrator.
null
It appears error BMXAA8093E can occur in a few different scenarios where a problem occurs with a report and a more specific explanation can't be provided:
https://www.ibm.com/support/pages/error-trying-save-qbr-or-create-new-report
I would suggest first confirming if a more specific error or any additional information is provided in the application logs. Following that you may want to verify that you have a Report Object Structure (ROS) for the object structure based on your custom view (i.e. in Integration -> Object Structures there is a record with "Consumed By" set to "Reporting" that has your object structure based on the custom view as a source object). Although you mentioned adding a Signature Option it is not clear from your description whether a ROS (mentioned earlier) exists and whether Administration -> Report Administration -> Set Report Object Structure Security has been used to tie that ROS to an existing security group or groups.
I had the same issue. Here is the solution that worked for me: go to Database Configuration, select your view, ensure that EXTENDSOBJECT is populated. In my case, it was not. You can fix this from backend. Let's assume your extended object is ASSET and your view is MYVIEW:
update maximo.maxobject set EXTENDSOBJECT='ASSET' where objectname = 'MYVIEW';
update maximo.maxobjectcfg set EXTENDSOBJECT='ASSET' where objectname = 'MYVIEW'; commit;
Do NOT forget to restart the app server.
We currently have a requirement where an end user can perform a signature capture inside the SO Invoice screen.
End user would click a button or execute an action from the Actions Menu. A touch screen graphical editor would come up allowing the user to use their finger or any hardware supported to create a signature image. Upon clicking Accept, the image would be stored against the document Files attachment.
We are looking for something possibly already developed, or if necessary, a control we might be able to spawn that could then write the image attachment back.
Please advise.
If I'm not mistaken, at this point the functionality to create user signatures and attach the signature image file to an Acumatica ERP form that supports file attachments is exclusively available only in Acumatica mobile applications. I wish there were an Aspx control inside the framework, which could be used as is for that purpose, but unfortunately, there is not any to my knowledge.
An alternative approach is to create a custom PXSmartPanel embedding a custom HTML webpage (via the InnerPageUrl property). The custom HTML page can be used only to capture the signature and attach it to the current record inside Acumatica.
Since RuslanDev noted the mobile application for this, I'll share the MSDL code from the new T400 class on Customization of the Mobile Application. I don't think this is what you were asking, but I'm adding as an answer to preserve formatting for those that may be looking for how to do this in Mobile.
To add to the mobile application on 2018 R2, use the new Mobile Applications section of the Customization Project. Simply add the - add recordAction "SignReport" - section as shown below.
update screen SO301000 {
update container "OrderSummary" {
add recordAction "SignReport" {
behavior = SignReport
displayName = "Sign"
}
}
}
I am new to Liferay. Now I need to create the flow chart which has the Liferay table work flow in following scenarios,
1) What are the list of table will reflect/update if we create the site admin?
2) What are the list of table will reflect/update if we create the site?
I tried by opening database tables and noticed that USER_, CONTACT_ will reflect, But I need list of all the related tables which will reflect when we create the site and siteadmin? I am using Liferay 6.2 version.
Thanks in advance.
When you want to know the internals of any system it is always best to check the relevant source-code. So in this case you can check the source-code for those classes which are used for CRUD operations on User and Site.
1) What are the list of table will reflect/update if we create the site admin?
Site-administrator is a Role, which can be applied to a User created in Liferay.
So if you want all the tables that are created from User-creation till User is assigned the Site-administrator role for a particular site, there here are some which I can recollect:
User_ (Obvious)
Contact_ (not so obvious :-) )
Group_ (Users are also created as a record in this table since Users have public and private pages)
Address (if you add an address)
Phone (if you add a Phone)
Users_Roles (Power user role is assigned by default)
UserGroupRole (user and site-role relationship, Site-administrator is a Site-role)
Users_Groups (user and site relationship)
For others you should refer the source-code for UserLocalServiceImpl, RoleLocalServiceImpl and GroupLocalServiceImpl, check the relevant methods prefixed add, update etc.
The corresponding service.xml for these module would reveal the database tables being used.
2) What are the list of table will reflect/update if we create the site?
Sites are nothing but Groups in Liferay. So its obvious Group_ table is playing a big role.
Other tables also depend upon what configuration you are doing while creating a Site.
Then there would be other tables like Layout when you start creating pages for a Site.
I would strongly encourage to go ahead and explore the source code for the classes and you would understand the flow - when and what tables are affected.
Here is some convention which might help you traverse the source-code, almost every *LocalServiceImpl is associated with a *Model like UserLocalServiceImpl with UserModel and almost every *Model has a corresponding database table with the same name.
Also the name of the functionality would in most cases hints at what service classes are being used to connect to database, like adding a User would hint at using UserLocalServiceImpl.
Hope I have understood your question and have been able to give some proper direction.
If you want to know this because you also want to write to these tables: Don't go there! You should purely use the API to change the data that Liferay stores. Otherwise you will run into disasters some time in the future - promised.
For just getting the SQL commands that Liferay actually uses, configure portal-ext.properties and change this default value:
hibernate.show_sql=false
Then go to "Server Administration/Log Levels" and add a new category "org.hibernate.SQL", configure it to the level DEBUG. Then the results show up in the logs. Note that this log configuration is transient and will be reverted on next server start. If you want the setting to be persistent, you'll need to go into Liferay's log4j configuration files.
Remember: You don't want to write to the tables ever. Promise!
there are many standard objects e.g. AccountcontactRole, LetterHead, Approval etc. which can be retrieved using Salesforce APIs. What is the way to see these objects in Salesforce environment in browser?
Very roughly speaking - easiest cheat is to simply put the Id in the URL. So if your Salesforce instance is https://na1.salesforce.com then adding /001.... (any valid Account Id) will take you to this account. Similarly /016... will take you to "this" Letterhead record.
Some data is easily accessible to users - for example AccountContactRole should be available as related list under Account. If it isn't - probably the administrator removed it from page layout because the company decided to use only the straightforward Account - Contact relationship.
Some data like Letterheads, EmailTemplates, Approval processes is visible in the setup area (not all users have the "View Setup and Configuration" permission in their Profiles!)
*Share records (like AccountShare) would be visible after you click the Sharing button on the page layout (if it's not visible - again, check with Admin).
If you're using API to fetch the data, you probably can also use "describe" calls to fetch info which objects are available, what fields are present in the tables... Sometimes the "Frontdoor URLs" property is set (although I confess I'm not sure how to get it, http://www.salesforce.com/us/developer/docs/apexcode/Content/apex_Schema_DescribeSObjectResult_instance_methods.htm doesn't mention it).
Also - if you haven't noticed yet - all Accounts start with "001". Try to guess where "/001" and "/001/o" links would lead.
I've created two new custom attributes in the UserProfile. When the service we wrote returns data about a specific user by using the UserProfile object, sometimes the data isn't returned, even though if we look at the user in SSP it look populated. Some users work; this is the first user we set up with data. I'm not sure if sometime in the meantime after setting up the first user and testing, if there's something we ran and need to run again. How can I get all the users to get their data returned in a call to their UserProfile?
It may be a language issue, perhaps you can detect a pattern in working/not working users and their language?
Have you looked at the visibility of the custom attributes? Is it possible that it's a question of who is supposed to be able see the attribute that is causing your issue?
It could be connected to when the profile was created and when the attributes were added.
Is there any pattern to which users work and which do not?
Try creating a new user, and see if the attributes are available for that user.