Getting this error when I select a "publish target" in VS 2015 update 3. Had a look for a while online but didn't see anything, so any help would be appreciated if you could point me in the right direction.
An error has occurred while processing the request: Method 'StopRemoteProfiler' in type 'Microsoft.VisualStudio.Web.WindowsAzure.AzureWebSite' from assembly 'Microsoft.VisualStudio.Web.WindowsAzure.Impl, Version=14.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' does not have implementation
I updated to the to Azure sdk 2.9.6 last night because of a different issue but related where there was no error, but no existing apps were listed.
I can confirm that this works on my work computer and I have existing apps on Azure, but not working on my home computer.
I am a bit loath to uninstall and reinstall VS, so any help would be appreciated. Of course, if the only solution is to reset, then so be it.
Thanks,
Jarrod
I faced the same problem. This is what worked for me.
I updated the "Microsoft .NET Core 1.0.1 - VS 2015 Tooling Preview 2" by going to Menu -> Tools -> Extensions and Updates -> Updates -> Visual Studio Gallery. It shows all the available updates for your version of studio. Select the component to update. It should download a file named "DotNetCore.1.0.1-VS2015Tools.Preview2.0.3.exe" or something similar. When you run this file, if you have the software already installed then select the repair option. It will ask you to close any running instances of Visual Studio, also make sure you have internet connection.
Also if you are using Web Deploy to publish your app make sure you have Microsoft Web Deploy v3 or higher installed or you will get error. You can do it using Microsoft Web Platform Installer.
Hope it helps.
Related
I am working on a solution that apparently was created in VS2013. I have VS2015 installed. There are a number of .dfproj files included in the solution. When I attempt to load the solution it tells me that .dfproj files are unsupported. I have the latest Azure SDK installed. I also located a download for the "Azure Data Factory Visual Studio Tools", however when I attempt to install it, it tells that it is incompatible with VS2015. I have been unable to locate a version of those tools intended for 2015. If someone could point me in the right direction to solve this dilemma, I would be greatly appreciative.
I hope, I am not too late to answer your question.(almost two years)..
I faced similar issue as you mentioned in question. In my case I was unable to open .dfproj file. I downloaded Microsoft Azure DataFactory Tools for Visual Studio 2015 from Microsoft market place. Installed it to my machine. Now .dfproj file is loading.
Microsoft VS Professional 2015
VS2015 version: 14.0.25431 update 3
I am getting error while publishing worker role from Visual Studio 2013 with update 5. When i select worker role project and click on publish, it is showing me below error on pop up window and i am not able to move ahead:
There was an error reflecting type 'Microsoft.Cct.AzureDiagnostics.ObjectModel.PublicConfig'.
Any help related this is appreciated. Please let me know if you need more information.
I found the solution here:
In your Azure project, edit any diagnostics.wadcfgx files in a text editor, and set <IsEnabled>false</IsEnabled> (near the bottom)
Right click project > Publish, untick Send diagnostics data to Application Insights, hit Next
I had upgraded from Azure SDK 2.3 to 2.9.
I had this exact issue after upgrading Azure Tools from 2.6 to 2.9 - I solved it by going into Programs and Features and uninstalling all items that started with "Microsoft Azure" and had a 2.6 version number in the name, leaving only the 2.9 behind (all with Visual Studio 2013 closed). Then I restarted Visual Studio 2013 and it magically started working properly!
I.ve installed the Azure SDK 2.7 (the features for VS2013), restarted the VS2013 and it worked again, you can download the SDK items manually at https://www.microsoft.com/en-us/download/details.aspx?id=48178
I am currently developing an Azure Logic App. This is very straight-forward from portal, but I need to use Visual Studio as an IDE for this. I have followed all the steps mentioned in https://azure.microsoft.com/en-in/documentation/articles/app-service-logic-deploy-from-vs/ article, but when I try to do right-click "<>.json" and say "Open in Logic App Designer", the Visual Studio crashes everytime.
Could anyone please assist on the same?
Thanks
I has a similar issue, I found I had to install the Azure Logic Apps Tools (https://marketplace.visualstudio.com/items?itemName=VinaySinghMSFT.AzureLogicAppsToolsforVisualStudio), restart Visual Studio and then create the Azure Resource Group project for it to work.
The project that I had generated without the tool installed did not work (ever).
I'm using the Azure SDK 2.9.6, Visual Studio 2015 update 3
Are you currently signed into Visual Studio with an account containing valid Azure subscriptions/currently has strong internet connectivity? That is known to cause editing issues before.
If that does not solve your problem, we have enabled logging feature in our most recent update (ver 1.0.0):
a. Open developer command prompt for VS2015
b. Run following command to start VS with activity logging enabled.
devenv.exe /log
c. Repro the issue in this instance and close it.
d. You can find the activity log at location :
%APPDATA%\Microsoft\VisualStudio\14.0\ActivityLog.xml
e. Please send us this file to us.
If you can share the logs with logicappsbug#microsoft.com, we can further assist you on this specific problem.
Thanks,
Max
I have a c# application that publishes to a server using click-once, so our company clients can run it. I upgrade my visual studio from 2010 to 2012. every thing is great so far and clients can run the application normally after my publishes.
then I add a report viewer Item to my application and it runs on my pc well. but after publishing the clients face this error:
unable to install or run the application. the application requires that assembly microsoft.reportviewer.ProcessingObjectModel version 11.0.0.0 to be installed in your GAC.
what should I do now, I search a lot but cant find a solution.
thanks.
You will need to add the report viewer as a prerequisite. Here is a link to MSDN that describes what is needed.
http://msdn.microsoft.com/en-us/library/ms251723.aspx
I have VS2012 Express Web installed on my machine and can create all different kinds of Projects with exception of MVC3/MVC4 apps. When I click OK on the New Project dialog I get the Select A Template dialog. I notice that the Create a Unit Test Project checkbox is Disabled. Selecting any of the choices (such as Internet Application) gives me this same error: The system cannot find the file specified (Exception from HRESULT 0x80070002).
I have uninstalled and deleted the C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\VWDExpress\ProjectTemplatesCache and ItemsTemplateChache - and after removal deleted the entire VWDExpress directory so the fresh install would recreate all the templates. I've tried both the web-installer as well as the .iso installer. Has anyone seen this problem or have any idea why I can't create MVC3/MVC4 projects?
Any thoughts would be greatly appreciated. I have posted to the MSDN Newgroup and not had any luck there.
regards,
Bill
I had the same problem with a full installation of Visual Studio 2012. Uninstalling Visual Studio and everything it came with (SQL Server localDB, Silverlight SDKs etc), restarting, then reinstalling Visual Studio made it work.
Prior to re-installing, I ran ProcessMonitor during an attempt to create an MVC4 app and it kept trying to find an "extension.vsixmanifest" file but couldn't. I'm not sure which one, since I didn't try reinstalling all my extensions; maybe that will help.