I am looking for a way to modify the ls output in that way that every directory displays [+] in front of the directory name. Ideally doing via bashrc.
me#computer[~]$ ls
[+]directory [+]directory
[+]directory file.png
file file.txt
readme
Currently I am just customizing the color output:
LS_COLORS=$LS_COLORS:'di=1;37;4' ; export LS_COLORS
This might help you, but it gives you only one column output:
ls | sed -r "$(find -maxdepth 1 -type d | cut -d/ -f2 | sed "1 d; 2~1 { s:.*:s/^\\(&\\)$/[+]\\\\1/;:g}")"
It works by piping the output of ls through sed and the sed script is dynamically build using a pipe that converts a list of directories to a list of S/^dirname$/[+]dirname/; sed script lines.
Just try out all the parts individually to see how it works.
For example when run in /etc the outputs starts likes this:
[+]acpi
adduser.conf
[+]adobe
[+]akonadi
aliases
aliases.db
You might want to alias the command in your bashrc.
And you might want to look into the tree command.
You can use :
ls -l : directories will start with d.
ls -p : a slash will be added into directory name like dir/
ls -F : will also add a slash after dir names and other marks to other file types (*, etc)
ls -d */ : As advised in comments, will list only dir names with a slash at the end. Remove -d to see also sub dir contents.
In terms of manipulating ls output you could go like :
ls -l |awk '/^d/{print "[+]"$NF}; /^[^d]/{print $NF}' |column
You can also use find and avoid parsing ls since had been said that parsing ls might break if file names contain strange chars like new lines etc.
find in this format will produce output identical to above ls:
find . -maxdepth 1 -printf '%Y %f\n' |awk '/^d/{print "[+]"$NF}; /^[^d]/{print $NF}' |column
you should also try this using a bash script
#!/usr/bin/env bash
myls() {
for i in *;do
[[ -d "${i}" ]] && {
printf "%s\n" "[+] ${i}"
continue;
}
printf "%s\n" "${i}"
done
}
source the script in your .bashrc file. Whenever you want to use this, just call myls in the directory.
you should note that it does not give you a colored output
Related
My goal is copy a bulk of specific directories whose names are in a txt file as follows:
$ cat names.txt
raw1
raw2
raw3
raw4
raw5
These directories have subdirectories, hence it is important to copy all the contents. When I list in my terminal it looks like this:
$ ls -l
raw3
raw7
raw1
raw8
raw5
raw6
raw2
raw4
To perform this task, I have tried the following:
cat names.txt | while read line; do grep -l '$line' | xargs -r0 cp -t <desired_destination>; done
But, I get this mistake
cp: cannot stat No such file or directory
I suppose it's because the names in the file list (names.txt) don't match in sorting with the ones in the terminal. Notice that they are unsorted and by using while read line doesn't work. Thank you for taking the time and commitment to help me.
Having problems following the logic of the current code so in the name of K.I.S.S. I propose:
tgtdir=/my/target/directory
while read -r srcdir
do
[[ -d "${srcdir}" ]] && cp -rp "${srcdir}" "${tgtdir}"
done < <(tr -d '\r' < names.dat)
NOTES:
the < <(tr -d '\r' < names.dat) is used to remove windows/dos line endings from names.dat (per comments from OP); if names.dat is updated to remove the \r' then the tr -d with be a no-op (ie, bit of overhead to spawn the subprocess but the script should still read names.dat correctly)
assumes script is run from the directory where the source directories reside otherwise code can be modified to either cd to said directory or preface the ${srcdir} references with said directory
OP can add/modify the cp flags as needed, but I'm assuming at a minimum -r will be needed in order to recursively copy the directories
UUoC.
cat names.txt | while read line; do ...; done
is better written
while read line; do ...; done < names.txt
do grep -l '$LINE' | is eating your input.
printf "%s\n" 1 2 3 |while read line; do echo "Read: [$line]"; grep . | cat; done
Read: [1]
2
3
In your case, it is likely finding no lines that match the literal string $LINE which you have embedded in single-qote marks, which do not allow it to be parsed for content. Use "$line" (avoid capitals), and wouldn't be helpful even if it did match:
$: printf "%s\n" 1 2 3 | grep -l .
(standard input)
You didn't tell it what to read from, so -l is pointless since it's reading the same stdin stream that the read is.
I think what you want is a little simpler -
xargs cp -Rt /your/desired/target/directory/ < names.txt
Assuming you wanted to leave the originals where they were.
I have a bash command that lists a number of files and directories. I want to remove everything that is not an existing directory. Is there anyway I can do this without creating a script of my own? I.e. I want to use pre-existing programs available in linux.
E.g. Given that I have this folder:
dir1/
dir2/
file.txt
I want to be able to run something like:
echo dir1 dir2 file.txt somethingThatDoesNotExist | xargs [ theCommandIAmLookingFor]
and get
dir1
dir2
It would be better if the command generating the putative paths used a better delimeter, but you might be looking for something like:
... | xargs -n 1 sh -c 'test -d "$0" && echo $0'
You can use this command line using grep -v:
your_command | grep -vxFf <(printf '%s\n' */ | sed 's/.$//') -
This will filter out all the sub-directories in current path from your list.
If in case you want to list only existing directories then remove -v as:
your_command | grep -xFf <(printf '%s\n' */ | sed 's/.$//') -
Note that glob */ prints all sub-directories in current path with a trailing / and sed is used to remove this last /.
$ ls /tmp/foo/
file1.txt file2.txt
$ ls /tmp/bar/
file20.txt
$ ls /tmp/foo/file*.txt | grep -o -E '[0-9]+' | sort -n | paste -s -d,
1,2
How to fetch the number in the filename from both the directories? in the above example, I need to get 1,2,20, its in bash shell.
UPDATE:
$ ls /tmp/foo/file*.txt /tmp/bar/file*.txt /tmp/jaz99/file*.txt /tmp/nah/file*.txt | grep -o -E '[0-9]+' | sort -n | paste -s -d,
ls: cannot access /tmp/nah/file*.txt: No such file or directory
1,2,20,30,99
in this case, it should not print 99 (as its not matched by *), and should not print the error if file not found.
You can get this done using a loop with output of find:
s=
# run a loop using find command in a process substitution
while IFS= read -d '' -r file; do
file="${file##*/}" # strip down all directory paths
s+="${file//[!0-9]/}," # remove all non-numeric characters and append comma
done < <(find /tmp/{foo,bar,nah,jaz99} -name '*.txt' -print0 2>/dev/null)
echo "${s%,}" # remove last comma from string
Output
1,2,20,30
Here's my take on this. Use arrays. No need to use external tools like sed or awk or find.
#!/usr/bin/env bash
declare -a a=()
for f in /tmp/{foo,bar,nah}/file*.txt; do
[[ $f =~ .*file([0-9]+).* ]]
a+=( ${BASH_REMATCH[1]} )
done
IFS=,
echo "${a[*]}"
The [[...]] expression populates the $BASH_REMATCH array with regex components. You can use that to extract the numbers and place them in a new temporary array, which you can express with comma separators using $IFS.
Results:
$ mkdir /tmp/foo /tmp/bar
$ touch /tmp/foo/file{1,2}.txt /tmp/bar/file20.txt
$ ./doit
1,2,20
I have a directory that contains only .txt files. I want to print the number of lines for every file. When I write cat file.txt | wc -l the number of lines appears but when I want to make a script it's more complicated. I have this code:
for fis in `ls -R $1`
do
echo `cat $fis | wc -l`
done
I tried: wc -l $fis , with awk,grep and it doesn't work. It tells that:
cat: fis1: No such file or directory
0
How can I do to print the number of lines?
To find files recursively in subdirectories, use the find command, not ls -R, which is mainly intended for human reading.
find "$1" -type f -exec wc -l {} +
The problems with looping over the output of ls -R are:
Filenames with whitespace won't be parsed correctly.
It prints other output beside just the filenames.
Not the problem here, but the echo command is more than needed:
You can use
wc -l "${fis}"
What goes wrong?
You have a subdir called fis1. Look to the output of ls:
# ls -R fis1
fis1:
file1_in_fis1.txt
When you are parsing this output, your script will try
echo `cat fis1: | wc -l`
The cat will tell you No such file or directory and wc counts 0.
As #Barmar explained, ls prints additional output you do not want.
Do not try to patch your attempt by | grep .txt and if [ -f "${fis}"]; then .., these will fail with filename with spaces.txt. So use find or shopt (and accept the answer of #Barmar or #Cyrus).
I've a bash script like this:
for d in /home/test/*
do
echo $d
done
Which ouputs this:
/home/test/newer dir
/home/test/oldest dir
I'd like to order the folders by creation time so that the 'oldest dir' directory appears first in the list. I've tried ls and tree variations to no avail.
For example,
for d in `ls -d -c -1 $PWD/*`
Returns:
/home/test/oldest
dir
/home/test/newer
dir
Very close, but it does not respect the space in the directory name. My question, how would I have oldest dir on top and support the whitespace?
ls -d -c $PWD/* | while read line
do echo "$line"
done
Another technique, kind of a Schwartzian transform:
stat -c $'%Z\t%n' /home/test/* | sort -n | cut -f2- |
while IFS= read -r filename; do
# ...
This solution is fragile with filenames containing newlines.