I used {% CurrentDocument.DocumentName %} in the Metadata > page title field. The Title tag displays ok when viewing the article itself on the browser; however, when searching through Smart Search, the results output something like below in place of the Title. I'm not sure why, is there a way to fix this? Thanks!
{% CurrentDocument.DocumentName |(user)myLogin|(hash)9f2b69705f777e8a884a107dfb72f681d8eb99867b6967514dbdca851b7f4309%}
Note: This is for hundreds of article pages, and inheriting Page Title from Parent by using the macro work best for me.
What is your transformation for search results? How do you retrieve that value?
I can see two possible approaches to solve your issue:
go to page type -> search fields and select DocumentName as a value for Title field
adjust search results transformation and use <%# GetSearchValue("DocumentName") %> instead of <%# Eval("Title") %>
This is most likely because the user who signed the macro is not in the system any longer. I'd change the macro to simply read:
{%CurrentDocument.DocumentName#%}
Having the # at the end will say the macro does not need to be signed.
Related
We've noticed a bug when looking at French search results. in the CMS Desk, i've kept the Page Name in English for the French content. The issue is, these are showing on the French results page.
in the transformation, based off the default one, I present the clickable title like this:
<a href='<%# SearchResultUrl() %>' data-type="title" target="_blank" ><%#SearchHighlight(HTMLHelper.HTMLEncode(CMS.ExtendedControls.ControlsHelper.RemoveDynamicControls(DataHelper.GetNotEmpty(Eval("Title"), ""))), "<span class='highLight'>", "</span>")%></a>
Here's my thinking, if the Menu Caption is filled out, use that rather than title. How do i output DocumentMenuCaption without adjust the search fields on the menu page type?
I think my logic is, check if DocumentMenuCaption is emtpy, if it use, use Title.
You should be able to continue using GetNotEmpty and just pass in the DocumentMenuCaption first, something like this:
<%# GetNotEmpty(GetSearchValue("DocumentMenuCaption");Eval("Title")) %>
You may or may not need the "GetSearchValue" function, but that allows you to grab values from the object that may not be available in the default set of columns for the search results.
Alternatively, you should be able to use the IfEmpty() method:
<%# IfEmpty(GetSearchValue("DocumentMenuCaption"), Eval("Title"), GetSearchValue("DocumentMenuCaption")) %>
Both transformation methods taken from here (double check syntax on "GetNotEmpty" as there are different ways it's implemented: https://docs.kentico.com/k9/developing-websites/loading-and-displaying-data-on-websites/writing-transformations/reference-transformation-methods
You can read more about the search transformations here: https://docs.kentico.com/k9/configuring-kentico/setting-up-search-on-your-website/displaying-search-results-using-transformations
I use Orchard 1.10.1. I have a CustomContentType that has a "Group" Taxonomy field . In Content-CustomContentType.Detail.cshtml alternate, I want to have a link to a certain taxonomy term. this is my code:
<a href='???'>#Model.ContentItem.CustomContentType.Group.Terms[0].Name</a>
How can I get the url to replace this '???' in above code.
Thanks in advance.
You have a few options available to you. I've just typed them all straight into the browser and Orchard is a tricky beast to navigate its model so if they blow up in your face let me know and I'll dig a bit deeper :)
Let orchard make the entire link
Looking at the TaxonomyItemLink.cshtml file you can see that you can display the link like this:
#using Orchard.Taxonomies.Models
#{
TermPart part = Model.ContentPart;
}
#Html.ItemDisplayLink(part)
So in your case you could use:
#Html.ItemDisplayLink((ContentPart)Model.ContentItem.CustomContentType.Group.Terms[0])
Just get the URL
You can use #Url.ItemDisplayUrl() to turn a routable content item into a url.
<a href="#Url.ItemDisplayUrl((ContentPart)Model.ContentItem.CustomContentType.Group.Terms[0])">
#Model.ContentItem.CustomContentType.Group.Terms[0].Name
</a>
Because it's an extension method you can't pass a dynamic so you will need to cast the type. This is why the (ContentPart) is there.
Just get the Slug
Actually, in this case the TermsPart class already has a .Slug property on it, so this might also work:
<a href="#Model.ContentItem.CustomContentType.Group.Terms[0].Slug">
#Model.ContentItem.CustomContentType.Group.Terms[0].Name
</a>
I'm not sure if the slug just contains the end bit or its full url though.
I'm having an issues with two repeaters, both using the same Selected Item Transformation. Each repeater is fed by a separate Page Data Source, since i also have pagination.
When an item from repeater 1 is selected, i see the memo data, but also repeater 1 table header, and all of repeater 2's table. Is it possible to set up a new page template for this, and have the memo detail show there?
Here is the memo landing page:
And here is the detail page:
Here's the tranformation code:
<section id="memoDetail">
<h1>Memorandum</h1>
<ul id="memoHeader">
<li><span class="headerLabel">To:</span> {% To %}</li>
<li><span class="headerLabel">From:</span> {% From %}</li>
<li><span class="headerLabel">Subject:</span> {% Subject %}</li>
<li><span class="headerLabel">Date:</span> {% Date %}</li>
</ul>
<div id="memoDetails">{% Details %}</div>
</section>
I believe you're using the same page template for items listing as well as details pages. The answer is yes, you can have different templates for those pages. You'll have to update each page shown in the repeater with new template in this case.
However this is not necessary: you may try to hide second repeater, e.g. base on page type, if repeaters show pages of different type, or put some visibility macro there.
I'm not sure why does header shows up on the second screenshot - there should be something wrong with repeater setting.
Mark, there is a way to force all the content for a page type to be display using a dedicated template. Go to Page Types app > select the page type > General > New page settings > Default page template, and set it there. This way, it doesn't matter where the items are listed by whatever repeaters, they will be displayed with the same template.
I have a tag cloud on product listing pages on my site that goes to a tag results page which displays products that contain that chosen tag. I want to put a header at the top of that results page that says something like "Products Tagged As: (insert tag name here)"
Any advice? I can't seem to access the system variable that displays the currently chosen tag name. The page URL contains the tagID variable, if that helps:
Product-Features.aspx?tagid=36
I am using Portal Engine Kentico development, by the way. Thanks.
I know this question has been asked a while ago. But I am posting my answer just in case if anyone come across this question they can use this snippet.
Try using following macro
{%tag="";foreach(g IN SiteObjects.TagGroups){foreach(t IN g.Tags){if(t.TagID=ToInt(QueryString.tagid)){tag=t.TagName;}}}return tag;%}
Note: I am using Kentico Version 9.0
For some reason the macro doesnt work in page template directly, I put the above macro in a Static Text webpart its worked like a charm.
Hope it would help someone like myself.
Regards,
Gopala
Use following macro:
{% GlobalObjects.Tags.Where("TagID = " + ToInt(QueryString.GetValue("tagid", 0))) %}
I am building a website with ExpressionEngine as the CMS. There is a "Work" section that displays all the projects, and a detail view that shows each project individually. It is at this point, on the single-entry view that I would like to have "prev" and "next" pagination. In my tests I have made it work when the URL is "somedomain.com/index.php/work/detail/" but it does not work when the specific entry is part of the URL: "somedomain.com/index.php/work/detail/some_project/"
I've tried putting the pagination code outside of the {exp:weblog:entries} tag as well as within it, but to no avail. This is what my pagination code looks like:
{paginate}
<ul>
{if previous_page}
<li>< previous</li>
{/if}
{if next_page}
<li>next ></li>
{/if}
</ul>
{/paginate}
You are using pagination for lists of entries, what you need is the next / previous entry tags:
http://expressionengine.com/user_guide/modules/channel/entry_linking.html
Hmm. I'm not sure what the issue is here, as I've never used the {pagination} tag in that way. After checking out the docs, I see that the example code for prev/next links inside of the {pagination} tag is wrapped inside of an {exp:comment:entries} loop instead of the normal {exp:channel:entries} loop.
The docs aren't very clear about the scope of this particular feature of the {pagination} tag. You might want to double check that, in your {exp:channel:entries} loop, you haven't included pagination as a value in the disable parameter.
You could also check out the page in EE's user guide about Next/Prev Linking, which details the use of {exp:channel:next_entry} and {exp:channel:prev_entry} tags in place of the {pagination} tag that you've been using. I've used these tags without a hitch, so I definitely recommend trying them if you can't get your method to work.
Best of luck!