How can I know if I actually need to return an l-value when using FALLBACK?
I'm using return-rw but I'd like to only use return where possible. I want to track if I've actually modified %!attrs or have only just read the value when FALLBACK was called.
Or (alternate plan B) can I attach a callback or something similar to my %!attrs to monitor for changes?
class Foo {
has %.attrs;
submethod BUILD { %!attrs{'bar'} = 'bar' }
# multi method FALLBACK(Str:D $name, *#rest) {
# say 'read-only';
# return %!attrs{$name} if %!attrs«$name»:exists;
# }
multi method FALLBACK(Str:D $name, *#rest) {
say 'read-write';
return-rw %!attrs{$name} if %!attrs«$name»:exists;
}
}
my $foo = Foo.new;
say $foo.bar;
$foo.bar = 'baz';
say $foo.bar;
This feels a bit like a X-Y question, so let's simplify the example, and see if that answers helps in your decisions.
First of all: if you return the "value" of a non-existing key in a hash, you are in fact returning a container that will auto-vivify the key in the hash when assigned to:
my %hash;
sub get($key) { return-rw %hash{$key} }
get("foo") = 42;
dd %hash; # Hash %hash = {:foo(42)}
Please note that you need to use return-rw here to ensure the actual container is returned, rather than just the value in the container. Alternately, you can use the is raw trait, which allows you to just set the last value:
my %hash;
sub get($key) is raw { %hash{$key} }
get("foo") = 42;
dd %hash; # Hash %hash = {:foo(42)}
Note that you should not use return in that case, as that will still de-containerize again.
To get back to your question:
I want to track if I've actually modified %!attrs or have only just read the value when FALLBACK was called.
class Foo {
has %!attrs;
has %!unexpected;
method TWEAK() { %!attrs<bar> = 'bar' }
method FALLBACK(Str:D $name, *#rest) is raw {
if %!attrs{$name}:exists {
%!attrs{$name}
}
else {
%!unexpected{$name}++;
Any
}
}
}
This would either return the container found in the hash, or record the access to the unknown key and return an immutable Any.
Regarding plan B, recording changes: for that you could use a Proxy object for that.
Hope this helps in your quest.
Liz's answer is full of useful info and you've accepted it but I thought the following might still be of interest.
How to know if returning an l-value ... ?
Let's start by ignoring the FALLBACK clause.
You would have to test the value. To deal with Scalars, you must test the .VAR of the value. (For non-Scalar values the .VAR acts like a "no op".) I think (but don't quote me) that Scalar|Array|Hash covers all the l-value super-types:
my \value = 42; # Int is an l-value is False
my \l-value-one = $; # Scalar is an l-value is True
my \l-value-too = #; # Array is an l-value is True
say "{.VAR.^name} is an l-value is {.VAR ~~ Scalar|Array|Hash}"
for value, l-value-one, l-value-too
How to know if returning an l-value when using FALLBACK?
Adding "when using FALLBACK" makes no difference to the answer.
How can I know if I actually need to return an l-value ... ?
Again, let's start by ignoring the FALLBACK clause.
This is a completely different question than "How to know if returning an l-value ... ?". I think it's the core of your question.
Afaik, the answer is, you need to anticipate how the returned value will be used. If there's any chance it'll be used as an l-value, and you want that usage to work, then you need to return an l-value. The language/compiler can't (or at least doesn't) help you make that decision.
Consider some related scenarios:
my $baz := foo.bar;
... (100s of lines of code) ...
$baz = 42;
Unless the first line returns an l-value, the second line will fail.
But the situation is actually much more immediate than that:
routine-foo = 42;
routine-foo is evaluated first, in its entirety, before the lhs = rhs expression is evaluated.
Unless the compiler's resolution of the routine-foo call somehow incorporated the fact that the very next thing to happen would be that the lhs will be assigned to, then there would be no way for a singly or multiply dispatched routine-foo to know whether it can safely return an r-value or must return an l-value.
And the compiler's resolution does not incorporate that. Thus, for example:
multi term:<bar> is rw { ... }
multi term:<bar> { ... }
bar = 99; # Ambiguous call to 'term:<bar>(...)'
I can imagine this one day (N years from now) being solved by a combination of allowing = to be an overloadable operator, robust macros that allow overloading of = being available, and routine resolution being modified so the above ambiguous call could do something equivalent to resolving to the is rw multi. But I doubt it will actually come to pass even with N=10. Perhaps there is another way but I can't think of one at the moment.
How can I know if I actually need to return an l-value when using FALLBACK?
Again, adding "when using FALLBACK" makes no difference to the answer.
I want to track if I've actually modified %!attrs or have only just read the value when FALLBACK was called.
When FALLBACK is called it doesn't know what context it's being called in -- r-value or l-value. Any modification comes after it has already returned.
In other words, whatever solution you come up with will being nothing to do per se with FALLBACK (even if you have to use it to implement some other aspect of whatever it is you're trying to do).
(Even if it were, I suspect trying to solve it via FALLBACK itself would just make matters worse. One can imagine writing two FALLBACK multis, one with an is rw trait, but, as explained above, my imagination doesn't stretch to that making any difference any time soon, if ever, and could only happen if the above imaginary things happened (the macros etc.) and the compiler was also modified to pay attention to the two FALLBACK multi variants, and I'm not at all meaning to suggest that that even makes sense.)
Plan B
Or (alternate plan B) can I attach a callback or something similar to my %!attrs to monitor for changes?
As Lizmat notes, that's the realm of Proxys. And thus your next SO question... :)
I have a signature for representing software programs:
sig Program {
???: Data -> Result
}
Each program maps input data to output result. So, there is a ternary relation (Program -> Data -> Result).
Notice the question marks for the field name. What field name do you suggest?
The name IO seems nice:
sig Program {
IO: Data -> Result
}
Then I can write elegant expressions such as:
all p: Program | p.IO ...
However, the name IO is meaningful only for (Data -> Result) not (Program -> Data -> Result).
I am stuck. What do you suggest?
IMHO, fields' names are most of the time contextual to the signature they are declared in, and that's really a fine thing.
If you look at a random sample module in Alloy, (e.g. module examples/puzzle/farmer), you'll see that it's not always that fields have meaning outside of their respective signatures:
sig State {
near: set Object,
far: set Object
}
Here, near and far don't really convey hints on their "temporal" nature.
Long story short, I'd stick to io for conciseness sake.
Indeed, I prefer the names of :
fiels, facts, preds, asserts, parameters, .. to be in lowercase
signatures to be Capitalized
enumeration (outer let), and singleton signatures to be in UPPERCASE
Take a data type declaration like
data myType = Null | Container TypeA v
As I understand it, Haskell would read this as myType coming in two different flavors. One of them is Null which Haskell interprets just as some name of a ... I guess you'd call it an instance of the type? Or a subtype? Factor? Level? Anyway, if we changed Null to Nubb it would behave in basically the same way--Haskell doesn't really know anything about null values.
The other flavor is Container and I would expect Haskell to read this as saying that the Container flavor takes two fields, TypeA and v. I expect this is because, when making this type definition, the first word is always read as the name of the flavor and everything that follows is another field.
My question (besides: did I get any of that wrong?) is, how does Haskell know that TypeA is a specific named type rather than an un-typed variable? Am I wrong to assume that it reads v as an un-typed variable, and if that's right, is it because of the lower-case initial letter?
By un-typed I mean how the types appear in the following type-declaration for a function:
func :: a -> a
func a = a
First of all, terminology: "flavors" are called "cases" or "constructors". Your type has two cases - Null and Container.
Second, what you call "untyped" is not really "untyped". That's not the right way to think about it. The a in declaration func :: a -> a does not mean "untyped" the same way variables are "untyped" in JavaScript or Python (though even that is not really true), but rather "whoever calls this function chooses the type". So if I call func "abc", then I have chosen a to be String, and now the compiler knows that the result of this call must also be String, since that's what the func's signature says - "I take any type you choose, and I return the same type". The proper term for this is "generic".
The difference between "untyped" and "generic" is that "untyped" is free-for-all, the type will only be known at runtime, no guarantees whatsoever; whereas generic types, even though not precisely known yet, still have some sort of relationship between them. For example, your func says that it returns the same type it takes, and not something random. Or for another example:
mkList :: a -> [a]
mkList a = [a]
This function says "I take some type that you choose, and I will return a list of that same type - never a list of something else".
Finally, your myType declaration is actually illegal. In Haskell, concrete types have to be Capitalized, while values and type variables are javaCase. So first, you have to change the name of the type to satisfy this:
data MyType = Null | Container TypeA v
If you try to compile this now, you'll still get an error saying that "Type variable v is unknown". See, Haskell has decided that v must be a type variable, and not a concrete type, because it's lower case. That simple.
If you want to use a type variable, you have to declare it somewhere. In function declaration, type variables can just sort of "appear" out of nowhere, and the compiler will consider them "declared". But in a type declaration you have to declare your type variables explicitly, e.g.:
data MyType v = Null | Container TypeA v
This requirement exist to avoid confusion and ambiguity in cases where you have several type variables, or when type variables come from another context, such as a type class instance.
Declared this way, you'll have to specify something in place of v every time you use MyType, for example:
n :: MyType Int
n = Null
mkStringContainer :: TypeA -> String -> MyType String
mkStringContainer ta s = Container ta s
-- Or make the function generic
mkContainer :: TypeA -> a -> MyType a
mkContainer ta a = Container ta a
Haskell uses a critically important distinction between variables and constructors. Variables begin with a lower-case letter; constructors begin with an upper-case letter1.
So data myType = Null | Container TypeA v is actually incorrect; the first symbol after the data keyword is the name of the new type constructor you're introducing, so it must start with a capital letter.
Assuming you've fixed that to data MyType = Null | Container TypeA v, then each of the alternatives separated by | is required to consist of a data constructor name (here you've chosen Null and Container) followed by a type expression for each of the fields of that constructor.
The Null constructor has no fields. The Container constructor has two fields:
TypeA, which starts with a capital letter so it must be a type constructor; therefore the field is of that concrete type.
v, which starts with a lowercase letter and is therefore a type variable. Normally this variable would be defined as a type parameter on the MyType type being defined, like data MyType v = Null | Container TypeA v. You cannot normally use free variables, so this was another error in your original example.2
Your data declaration showed how the distinction between constructors and variables matters at the type level. This distinction between variables and constructors is also present at the value level. It's how the compiler can tell (when you're writing pattern matches) which terms are patterns it should be checking the data against, and which terms are variables that should be bound to whatever the data contains. For example:
lookAtMaybe :: Show a => Maybe a -> String
lookAtMaybe Nothing = "Nothing to see here"
lookAtMaybe (Just x) = "I found: " ++ show x
If Haskell didn't have the first-letter rule, then there would be two possible interpretations of the first clause of the function:
Nothing could be a reference to the externally-defined Nothing constructor, saying I want this function rule to apply when the argument matches that constructor. This is the interpretation the first-letter rule mandates.
Nothing could be a definition of an (unused) variable, representing the function's argument. This would be the equivalent of lookAtMaybe x = "Nothing to see here"
Both of those interpretations are valid Haskell code producing different behaviour (try changing the capital N to a lower case n and see what the function does). So Haskell needs a rule to choose between them. The designers chose the first-letter rule as a way of simply disambiguating constructors from variables (that is simple to both the compiler and to human readers) without requiring any additional syntactic noise.
1 The rule about the case of the first letter applies to alphanumeric names, which can only consist of letters, numbers, and underscores. Haskell also has symbolic names, which consists only of symbol characters like +, *, :, etc. For these, the rule is that names beginning with the : character are constructors, while names beginning with another character are variables. This is how the list constructor : is distinguished from a function name like +.
2 With the ExistentialQuantification extension turned on it is possible to write data MyType = Null | forall v. Container TypeA v, so that the the constructor has a field with a variable type and the variable does not appear as a parameter to the overall type. I'm not going to explain how this works here; it's generally considered an advanced feature, and isn't part of standard Haskell code (which is why it requires an extension)
So I'm trying to write a function that takes a set of ternary relations and one of the middle elements which returns the set of relations where the element matches, but doesn't contain itself. (We already know what it is)
So something like this:
// addr gives us: {Book -> Name -> Addr}
fun [n:Name] : Set Book -> Addr {
//return {b->a} where {b->n->a}
}
With joins and domain restrictions, I've only been able to manage to get the binary relations: {Book -> Name} and {Name -> Addr}. I'm not sure how I would splice these together as the Name is constant, so you can't tell the difference.
Is it possible to do this with a function, or do I need something else?
I'm an absolute beginner at this, and it seems fairly simple in a normal procedural language. However, I can't find very good documentation and it looks to me I've just got completely the wrong end of the stick on terms of how functions work in this.
Or even more simply:
fun [n:Name]: Book -> Addr {
{b:Book,a:Addr | b->n->a in addr}
}
However, your use of the term "set of relations" and the keyword "set" in your function declaration makes me wonder if you mean something different. Note that this function returns a set of tuples, not a set of relations.
You can probably calculate that with a definition by comprehension:
fun [n:Name]: Book -> Addr {
{b:Book,a:Addr | b in (addr.a).n }
}
Every so often when programmers are complaining about null errors/exceptions someone asks what we do without null.
I have some basic idea of the coolness of option types, but I don't have the knowledge or languages skill to best express it. What is a great explanation of the following written in a way approachable to the average programmer that we could point that person towards?
The undesirability of having references/pointers be nullable by default
How option types work including strategies to ease checking null cases such as
pattern matching and
monadic comprehensions
Alternative solution such as message eating nil
(other aspects I missed)
I think the succinct summary of why null is undesirable is that meaningless states should not be representable.
Suppose I'm modeling a door. It can be in one of three states: open, shut but unlocked, and shut and locked. Now I could model it along the lines of
class Door
private bool isShut
private bool isLocked
and it is clear how to map my three states into these two boolean variables. But this leaves a fourth, undesired state available: isShut==false && isLocked==true. Because the types I have selected as my representation admit this state, I must expend mental effort to ensure that the class never gets into this state (perhaps by explicitly coding an invariant). In contrast, if I were using a language with algebraic data types or checked enumerations that lets me define
type DoorState =
| Open | ShutAndUnlocked | ShutAndLocked
then I could define
class Door
private DoorState state
and there are no more worries. The type system will ensure that there are only three possible states for an instance of class Door to be in. This is what type systems are good at - explicitly ruling out a whole class of errors at compile-time.
The problem with null is that every reference type gets this extra state in its space that is typically undesired. A string variable could be any sequence of characters, or it could be this crazy extra null value that doesn't map into my problem domain. A Triangle object has three Points, which themselves have X and Y values, but unfortunately the Points or the Triangle itself might be this crazy null value that is meaningless to the graphing domain I'm working in. Etc.
When you do intend to model a possibly-non-existent value, then you should opt into it explicitly. If the way I intend to model people is that every Person has a FirstName and a LastName, but only some people have MiddleNames, then I would like to say something like
class Person
private string FirstName
private Option<string> MiddleName
private string LastName
where string here is assumed to be a non-nullable type. Then there are no tricky invariants to establish and no unexpected NullReferenceExceptions when trying to compute the length of someone's name. The type system ensures that any code dealing with the MiddleName accounts for the possibility of it being None, whereas any code dealing with the FirstName can safely assume there is a value there.
So for example, using the type above, we could author this silly function:
let TotalNumCharsInPersonsName(p:Person) =
let middleLen = match p.MiddleName with
| None -> 0
| Some(s) -> s.Length
p.FirstName.Length + middleLen + p.LastName.Length
with no worries. In contrast, in a language with nullable references for types like string, then assuming
class Person
private string FirstName
private string MiddleName
private string LastName
you end up authoring stuff like
let TotalNumCharsInPersonsName(p:Person) =
p.FirstName.Length + p.MiddleName.Length + p.LastName.Length
which blows up if the incoming Person object does not have the invariant of everything being non-null, or
let TotalNumCharsInPersonsName(p:Person) =
(if p.FirstName=null then 0 else p.FirstName.Length)
+ (if p.MiddleName=null then 0 else p.MiddleName.Length)
+ (if p.LastName=null then 0 else p.LastName.Length)
or maybe
let TotalNumCharsInPersonsName(p:Person) =
p.FirstName.Length
+ (if p.MiddleName=null then 0 else p.MiddleName.Length)
+ p.LastName.Length
assuming that p ensures first/last are there but middle can be null, or maybe you do checks that throw different types of exceptions, or who knows what. All these crazy implementation choices and things to think about crop up because there's this stupid representable-value that you don't want or need.
Null typically adds needless complexity. Complexity is the enemy of all software, and you should strive to reduce complexity whenever reasonable.
(Note well that there is more complexity to even these simple examples. Even if a FirstName cannot be null, a string can represent "" (the empty string), which is probably also not a person name that we intend to model. As such, even with non-nullable strings, it still might be the case that we are "representing meaningless values". Again, you could choose to battle this either via invariants and conditional code at runtime, or by using the type system (e.g. to have a NonEmptyString type). The latter is perhaps ill-advised ("good" types are often "closed" over a set of common operations, and e.g. NonEmptyString is not closed over .SubString(0,0)), but it demonstrates more points in the design space. At the end of the day, in any given type system, there is some complexity it will be very good at getting rid of, and other complexity that is just intrinsically harder to get rid of. The key for this topic is that in nearly every type system, the change from "nullable references by default" to "non-nullable references by default" is nearly always a simple change that makes the type system a great deal better at battling complexity and ruling out certain types of errors and meaningless states. So it is pretty crazy that so many languages keep repeating this error again and again.)
The nice thing about option types isn't that they're optional. It is that all other types aren't.
Sometimes, we need to be able to represent a kind of "null" state. Sometimes we have to represent a "no value" option as well as the other possible values a variable may take. So a language that flat out disallows this is going to be a bit crippled.
But often, we don't need it, and allowing such a "null" state only leads to ambiguity and confusion: every time I access a reference type variable in .NET, I have to consider that it might be null.
Often, it will never actually be null, because the programmer structures the code so that it can never happen. But the compiler can't verify that, and every single time you see it, you have to ask yourself "can this be null? Do I need to check for null here?"
Ideally, in the many cases where null doesn't make sense, it shouldn't be allowed.
That's tricky to achieve in .NET, where nearly everything can be null. You have to rely on the author of the code you're calling to be 100% disciplined and consistent and have clearly documented what can and cannot be null, or you have to be paranoid and check everything.
However, if types aren't nullable by default, then you don't need to check whether or not they're null. You know they can never be null, because the compiler/type checker enforces that for you.
And then we just need a back door for the rare cases where we do need to handle a null state. Then an "option" type can be used. Then we allow null in the cases where we've made a conscious decision that we need to be able to represent the "no value" case, and in every other case, we know that the value will never be null.
As others have mentioned, in C# or Java for example, null can mean one of two things:
the variable is uninitialized. This should, ideally, never happen. A variable shouldn't exist unless it is initialized.
the variable contains some "optional" data: it needs to be able to represent the case where there is no data. This is sometimes necessary. Perhaps you're trying to find an object in a list, and you don't know in advance whether or not it's there. Then we need to be able to represent that "no object was found".
The second meaning has to be preserved, but the first one should be eliminated entirely. And even the second meaning should not be the default. It's something we can opt in to if and when we need it. But when we don't need something to be optional, we want the type checker to guarantee that it will never be null.
All of the answers so far focus on why null is a bad thing, and how it's kinda handy if a language can guarantee that certain values will never be null.
They then go on to suggest that it would be a pretty neat idea if you enforce non-nullability for all values, which can be done if you add a concept like Option or Maybe to represent types that may not always have a defined value. This is the approach taken by Haskell.
It's all good stuff! But it doesn't preclude the use of explicitly nullable / non-null types to achieve the same effect. Why, then, is Option still a good thing? After all, Scala supports nullable values (is has to, so it can work with Java libraries) but supports Options as well.
Q. So what are the benefits beyond being able to remove nulls from a language entirely?
A. Composition
If you make a naive translation from null-aware code
def fullNameLength(p:Person) = {
val middleLen =
if (null == p.middleName)
p.middleName.length
else
0
p.firstName.length + middleLen + p.lastName.length
}
to option-aware code
def fullNameLength(p:Person) = {
val middleLen = p.middleName match {
case Some(x) => x.length
case _ => 0
}
p.firstName.length + middleLen + p.lastName.length
}
there's not much difference! But it's also a terrible way to use Options... This approach is much cleaner:
def fullNameLength(p:Person) = {
val middleLen = p.middleName map {_.length} getOrElse 0
p.firstName.length + middleLen + p.lastName.length
}
Or even:
def fullNameLength(p:Person) =
p.firstName.length +
p.middleName.map{length}.getOrElse(0) +
p.lastName.length
When you start dealing with List of Options, it gets even better. Imagine that the List people is itself optional:
people flatMap(_ find (_.firstName == "joe")) map (fullNameLength)
How does this work?
//convert an Option[List[Person]] to an Option[S]
//where the function f takes a List[Person] and returns an S
people map f
//find a person named "Joe" in a List[Person].
//returns Some[Person], or None if "Joe" isn't in the list
validPeopleList find (_.firstName == "joe")
//returns None if people is None
//Some(None) if people is valid but doesn't contain Joe
//Some[Some[Person]] if Joe is found
people map (_ find (_.firstName == "joe"))
//flatten it to return None if people is None or Joe isn't found
//Some[Person] if Joe is found
people flatMap (_ find (_.firstName == "joe"))
//return Some(length) if the list isn't None and Joe is found
//otherwise return None
people flatMap (_ find (_.firstName == "joe")) map (fullNameLength)
The corresponding code with null checks (or even elvis ?: operators) would be painfully long. The real trick here is the flatMap operation, which allows for the nested comprehension of Options and collections in a way that nullable values can never achieve.
Since people seem to be missing it: null is ambiguous.
Alice's date-of-birth is null. What does it mean?
Bob's date-of-death is null. What does that mean?
A "reasonable" interpretation might be that Alice's date-of-birth exists but is unknown, whereas Bob's date-of-death does not exist (Bob is still alive). But why did we get to different answers?
Another problem: null is an edge case.
Is null = null?
Is nan = nan?
Is inf = inf?
Is +0 = -0?
Is +0/0 = -0/0?
The answers are usually "yes", "no", "yes", "yes", "no", "yes" respectively. Crazy "mathematicians" call NaN "nullity" and say it compares equal to itself. SQL treats nulls as not equal to anything (so they behave like NaNs). One wonders what happens when you try to store ±∞, ±0, and NaNs into the same database column (there are 253 NaNs, half of which are "negative").
To make matters worse, databases differ in how they treat NULL, and most of them aren't consistent (see NULL Handling in SQLite for an overview). It's pretty horrible.
And now for the obligatory story:
I recently designed a (sqlite3) database table with five columns a NOT NULL, b, id_a, id_b NOT NULL, timestamp. Because it's a generic schema designed to solve a generic problem for fairly arbitrary apps, there are two uniqueness constraints:
UNIQUE(a, b, id_a)
UNIQUE(a, b, id_b)
id_a only exists for compatibility with an existing app design (partly because I haven't come up with a better solution), and is not used in the new app. Because of the way NULL works in SQL, I can insert (1, 2, NULL, 3, t) and (1, 2, NULL, 4, t) and not violate the first uniqueness constraint (because (1, 2, NULL) != (1, 2, NULL)).
This works specifically because of how NULL works in a uniqueness constraint on most databases (presumably so it's easier to model "real-world" situations, e.g. no two people can have the same Social Security Number, but not all people have one).
FWIW, without first invoking undefined behaviour, C++ references cannot "point to" null, and it's not possible to construct a class with uninitialized reference member variables (if an exception is thrown, construction fails).
Sidenote: Occasionally you might want mutually-exclusive pointers (i.e. only one of them can be non-NULL), e.g. in a hypothetical iOS type DialogState = NotShown | ShowingActionSheet UIActionSheet | ShowingAlertView UIAlertView | Dismissed. Instead, I'm forced to do stuff like assert((bool)actionSheet + (bool)alertView == 1).
The undesirability of having having references/pointers be nullable by default.
I don't think this is the main issue with nulls, the main issue with nulls is that they can mean two things:
The reference/pointer is uninitialized: the problem here is the same as mutability in general. For one, it makes it more difficult to analyze your code.
The variable being null actually means something: this is the case which Option types actually formalize.
Languages which support Option types typically also forbid or discourage the use of uninitialized variables as well.
How option types work including strategies to ease checking null cases such as pattern matching.
In order to be effective, Option types need to be supported directly in the language. Otherwise it takes a lot of boiler-plate code to simulate them. Pattern-matching and type-inference are two keys language features making Option types easy to work with. For example:
In F#:
//first we create the option list, and then filter out all None Option types and
//map all Some Option types to their values. See how type-inference shines.
let optionList = [Some(1); Some(2); None; Some(3); None]
optionList |> List.choose id //evaluates to [1;2;3]
//here is a simple pattern-matching example
//which prints "1;2;None;3;None;".
//notice how value is extracted from op during the match
optionList
|> List.iter (function Some(value) -> printf "%i;" value | None -> printf "None;")
However, in a language like Java without direct support for Option types, we'd have something like:
//here we perform the same filter/map operation as in the F# example.
List<Option<Integer>> optionList = Arrays.asList(new Some<Integer>(1),new Some<Integer>(2),new None<Integer>(),new Some<Integer>(3),new None<Integer>());
List<Integer> filteredList = new ArrayList<Integer>();
for(Option<Integer> op : list)
if(op instanceof Some)
filteredList.add(((Some<Integer>)op).getValue());
Alternative solution such as message eating nil
Objective-C's "message eating nil" is not so much a solution as an attempt to lighten the head-ache of null checking. Basically, instead of throwing a runtime exception when trying to invoke a method on a null object, the expression instead evaluates to null itself. Suspending disbelief, it's as if each instance method begins with if (this == null) return null;. But then there is information loss: you don't know whether the method returned null because it is valid return value, or because the object is actually null. It's a lot like exception swallowing, and doesn't make any progress addressing the issues with null outlined before.
Assembly brought us addresses also known as untyped pointers. C mapped them directly as typed pointers but introduced Algol's null as a unique pointer value, compatible with all typed pointers. The big issue with null in C is that since every pointer can be null, one never can use a pointer safely without a manual check.
In higher-level languages, having null is awkward since it really conveys two distinct notions:
Telling that something is undefined.
Telling that something is optional.
Having undefined variables is pretty much useless, and yields to undefined behavior whenever they occur. I suppose everybody will agree that having things undefined should be avoided at all costs.
The second case is optionality and is best provided explicitly, for instance with an option type.
Let's say we're in a transport company and we need to create an application to help create a schedule for our drivers. For each driver, we store a few informations such as: the driving licences they have and the phone number to call in case of emergency.
In C we could have:
struct PhoneNumber { ... };
struct MotorbikeLicence { ... };
struct CarLicence { ... };
struct TruckLicence { ... };
struct Driver {
char name[32]; /* Null terminated */
struct PhoneNumber * emergency_phone_number;
struct MotorbikeLicence * motorbike_licence;
struct CarLicence * car_licence;
struct TruckLicence * truck_licence;
};
As you observe, in any processing over our list of drivers we'll have to check for null pointers. The compiler won't help you, the safety of the program relies on your shoulders.
In OCaml, the same code would look like this:
type phone_number = { ... }
type motorbike_licence = { ... }
type car_licence = { ... }
type truck_licence = { ... }
type driver = {
name: string;
emergency_phone_number: phone_number option;
motorbike_licence: motorbike_licence option;
car_licence: car_licence option;
truck_licence: truck_licence option;
}
Let's now say that we want to print the names of all the drivers along with their truck licence numbers.
In C:
#include <stdio.h>
void print_driver_with_truck_licence_number(struct Driver * driver) {
/* Check may be redundant but better be safe than sorry */
if (driver != NULL) {
printf("driver %s has ", driver->name);
if (driver->truck_licence != NULL) {
printf("truck licence %04d-%04d-%08d\n",
driver->truck_licence->area_code
driver->truck_licence->year
driver->truck_licence->num_in_year);
} else {
printf("no truck licence\n");
}
}
}
void print_drivers_with_truck_licence_numbers(struct Driver ** drivers, int nb) {
if (drivers != NULL && nb >= 0) {
int i;
for (i = 0; i < nb; ++i) {
struct Driver * driver = drivers[i];
if (driver) {
print_driver_with_truck_licence_number(driver);
} else {
/* Huh ? We got a null inside the array, meaning it probably got
corrupt somehow, what do we do ? Ignore ? Assert ? */
}
}
} else {
/* Caller provided us with erroneous input, what do we do ?
Ignore ? Assert ? */
}
}
In OCaml that would be:
open Printf
(* Here we are guaranteed to have a driver instance *)
let print_driver_with_truck_licence_number driver =
printf "driver %s has " driver.name;
match driver.truck_licence with
| None ->
printf "no truck licence\n"
| Some licence ->
(* Here we are guaranteed to have a licence *)
printf "truck licence %04d-%04d-%08d\n"
licence.area_code
licence.year
licence.num_in_year
(* Here we are guaranteed to have a valid list of drivers *)
let print_drivers_with_truck_licence_numbers drivers =
List.iter print_driver_with_truck_licence_number drivers
As you can see in this trivial example, there is nothing complicated in the safe version:
It's terser.
You get much better guarantees and no null check is required at all.
The compiler ensured that you correctly dealt with the option
Whereas in C, you could just have forgotten a null check and boom...
Note : these code samples where not compiled, but I hope you got the ideas.
Microsoft Research has a intersting project called
Spec#
It is a C# extension with not-null type and some mechanism to check your objects against not being null, although, IMHO, applying the design by contract principle may be more appropriate and more helpful for many troublesome situations caused by null references.
Robert Nystrom offers a nice article here:
http://journal.stuffwithstuff.com/2010/08/23/void-null-maybe-and-nothing/
describing his thought process when adding support for absence and failure to his Magpie programming language.
Coming from .NET background, I always thought null had a point, its useful. Until I came to know of structs and how easy it was working with them avoiding a lot of boilerplate code. Tony Hoare speaking at QCon London in 2009, apologized for inventing the null reference. To quote him:
I call it my billion-dollar mistake. It was the invention of the null
reference in 1965. At that time, I was designing the first
comprehensive type system for references in an object oriented
language (ALGOL W). My goal was to ensure that all use of references
should be absolutely safe, with checking performed automatically by
the compiler. But I couldn't resist the temptation to put in a null
reference, simply because it was so easy to implement. This has led to
innumerable errors, vulnerabilities, and system crashes, which have
probably caused a billion dollars of pain and damage in the last forty
years. In recent years, a number of program analysers like PREfix and
PREfast in Microsoft have been used to check references, and give
warnings if there is a risk they may be non-null. More recent
programming languages like Spec# have introduced declarations for
non-null references. This is the solution, which I rejected in 1965.
See this question too at programmers
I've always looked at Null (or nil) as being the absence of a value.
Sometimes you want this, sometimes you don't. It depends on the domain you are working with. If the absence is meaningful: no middle name, then your application can act accordingly. On the other hand if the null value should not be there: The first name is null, then the developer gets the proverbial 2 a.m. phone call.
I've also seen code overloaded and over-complicated with checks for null. To me this means one of two things:
a) a bug higher up in the application tree
b) bad/incomplete design
On the positive side - Null is probably one of the more useful notions for checking if something is absent, and languages without the concept of null will endup over-complicating things when it's time to do data validation. In this case, if a new variable is not initialized, said languagues will usually set variables to an empty string, 0, or an empty collection. However, if an empty string or 0 or empty collection are valid values for your application -- then you have a problem.
Sometimes this circumvented by inventing special/weird values for fields to represent an uninitialized state. But then what happens when the special value is entered by a well-intentioned user? And let's not get into the mess this will make of data validation routines.
If the language supported the null concept all the concerns would vanish.
Vector languages can sometimes get away with not having a null.
The empty vector serves as a typed null in this case.