I have Malware code (java), I can see the code using (view source), I can't see bad code when I use any editor to delete the code, My domain is pointed to CloudFlare. What do I need to do to see the code and delete?
Try to enable line wrapping in editor. It is possible lines with bad code begin with many spaces and code shifted from begin of line to place where it need to scroll to right.
Related
This problem really hit a nerve with me. I have both YouCompleteMe and UltiSnips installed on my vim 8.0 editor. It seems that both of these plugins use the tab key for doing the auto-completion and that has created an incompatibility that has been also addressed by this question. My question is more specific, though. When I write a piece of code like <html, there is a pop-up menu that shows me all related snippets for that code.
I use the tab key to navigate through that menu but when I hit ctrl+y to accept and therefore expand one of these snippets, nothing happens! I think this structure suggests that it's possible to somehow choose one of those snippets from the menu without trying to define a shortcut for UltiSnip. What am I doing wrong? How should I navigate and choose those snippets?
I also would not want to stuff my vim with any new plugins (like supertab, etc.).
The solution was actually a lot simpler than I expected. In the beginning, I felt stupid for not knowing it but when I find a similar question like this one, I thought that probably many were fallen into the same trap.
I don't know whether to name it a bug or not but it's how Ultisnips and YouCompleteMe work together. In order to expand a snippet, you have to write the initializer exactly as it's defined. Of course, this seems obvious, but when you see a pop-up menu of different snippets, you might think they can be chosen but it only works if you already wrote the snippet initializer exactly as it's defined.
So when a snippet is called "html5"---as it's shown in my question---writing an extra opening bracket (<) will cause it to stop working. It cannot be expanded.
Also, don't forget to check out Siegfried Gevatter configuration. It's not possible to use tab key both for navigating into the pop-up menu and expanding the snippets.
P.S. It was nice if navigating through the pop-up menu could change the whole word (including the angle bracket), not just what succeeds it. This feature works this way in most of the other editors I see and that's probably why I wasn't able to spot the problem in the beginning.
To prepare an exam, I have to learn coding using google docs rather than using an IDE. It may seem idiot or impratical but the teacher really insists on that. It seems that is the same thing as Google interviews for example...
So far, I really got used with using two spaces indentation (I hate using tab indendation). And I want to learn how can I do that quickly in Google docs. Is there a shortcut or a "tips" (add-on?) for that?
For example, if you have an "if-condition" starting at the position number 4 and you want to move to the following line, it can be really convenient to have the cursor position at 4. Then, you'll add two spaces to start your block at position number 6. (ALL the if block will have at least position 6). But in Docs, when you move to the following line, the cursor always start at the beginning of the line except if you use the tab indentation. And it's really shitting if you want to indent your code properly...
Do you have a solution for that please ?
I was facing the same problem.
To write Python code in google docs, my solution is:
Switch off auto-capitalization, auto-correction and smart quotes. And other auto-substitutions so that you may write code without docs like formatting.
To do this: Tools> Preferences and uncheck the above items. Screen shots attached below.
Set tab to two spaces.
Right-click on ruler on top of page. Add left-tab stop, an arrow will appear, move this tab stop to 2 spaces from left of ruler. Try adding tab in the current line and if the tab size is OK, save this formatting.
To save:
Format > Paragraph Styles > Normal Text > Update 'Normal Text' to match.
Last, to add color(synatx highlight), you may use 'code blocks extension'.
Click install.
Now, write code in docs, select the code in google doc, click on:
Add-ons > Code Block. A pop up opens up.
Choose language : 'python' for me.
Choose theme: 'atom-one-dark'
click Format.
The code looks much like IDE, and writing more code is easier too.
While I understand that sometimes a point can be made by making students do things in a way that might not seem logical, this one doesn't make any sense to me.
Students don't learn anything useful by pressing space twice instead of letting an editor or IDE do it for them.
I wonder, is it because he/she wants it delivered in Google Docs or because they want you coding that way? If it's the latter, you won't have to hide your workaround.
I can only suggest using a good text editor, I always use the excellent and free Notepad++, and copy and paste it to and from Google Docs. Your instructor will never know. In fact, I'd be hunting around to see of there was a way to access your code files directly in Google Docs from Notepad++, or to auto-sync a folder with Google docs.
Notepad++ has syntax colouring - which will save your life - and can be set to indent with tabs or spaces to whatever indent width you specify. If not using an IDE, I only use Notepad++.
Your instructor sounds like some I had, people who cross a line from being quirky but with a point to make to just being a dick. There is absolutely no point in telling a student to code only in Google docs. Google docs is a great thing, I love it, but it is by no stretch of the imagination a coding tool.
(I see that this is an aged thread, but I'll respond in case someone else with a similar issue - like this year's class for that course - comes looking for an answer.)
You could try (ab)using bulleted lists:
Insert a bulleted list
Right click on the bullet, select "More bullets..."
In the "Symbol" selection list, choose "Format & whitespace" and select one of the whitespace options as bullet char
Repeat for as many levels (of bullet sub-lists) as you think you may need in your program
Fix indentation to match whatever feels best for you
Every time you need to write a nested block, you will have to press "tab" only once, then bullet list level is kept and the indentation with it. To go back to the outer block, just press shift-tab.
However, IMHO it doesn't worth the trouble. Generally, interview question solutions are not that large and hitting spacebar a couple of times is not much of an overhead.
It's somewhat cumbersome but you can set as many tab stops as you want, and docs will move nested tabs to the next tab stop as well. For example:
You can add tab stops by right clicking on that tab bar where you want the tab stop to be and clicking Add left tab stop. You'll want to have all text in the document selected if you want the tab stop to apply everywhere.
I have an idea for a useful tool but I have no idea where to start. (I apologize for the vague nature of the question, but I do think it can be answered in a specific way and therefore is appropriate for SO.)
Here's what I'm after in a nutshell: a Chrome extension that darkens/shades the whole viewport except for the "current" line, i.e. the line you're reading. (I explain momentarily how the "current" line is determined.)
Pretend the line outlined in red is the highlighted line and everything above and below is grayed out. (My mockup sucks but I'm working with limited tools right now.)
When the page loads and you turn on the extension, the "current" line is the first line of paragraph text. To go to the next line, press the down arrow. Ideally, your highlighted line is in the exact middle and the rest of the page "slides underneath" to the extent that it can so your eyes don't have to move.
So here's my question: if you knew HTML/CSS/JavaScript well enough but you'd never written a browser extension, where and how would you start this? Do a plain JS POC first? Build the POC as an extension?
To be clear, this isn't a "plz how i write ecomerce site" question where I'm asking you to spoon feed me the whole thing. I'm just asking what you'd do as the first step. I realize this is a non-trivial undertaking. Thanks in advance.
If you know HTML/CSS/Javascript well enough to get the effect you after, then getting started with a Chrome extension shouldn't be hard. Just read the Chrome extension developer documentation. There are loads of example extensions as well.
You basically need to make a package directory, containing a manifest.json, and specifying a single "content script" which would contain all your code.
It could make sense to start out developing based on a bookmarklet that injects a script tag (with file:///path/to/yourscript.js) because I think that would be slightly faster wrt loading new code, resulting in a slightly faster development cycle. You could also set up a dummy page to always include this particular script tag so you only have to reload that page to see your change. Even fancier: Use http://livereload.com/
Otherwise you need to instruct chrome to reload the extension manually after each change in your code.
You may like to use Extensions Reloader for easier reloads.
I like the idea by the way!
At work, I have to jump into old mysql_query procedural website build higgledy-piggledy (some var are camelCased AND underscored, no indent code, page are build in table ...)
Anyway, usually I m using ST2, but here I can't. So to search my line code, I use dreamweaver to click on the screen preview and the cursor drop on the code line I want.
I do not like and I don't know dreamweaver. But as code is UNREADABLE, that is the only way I have to work.(My boss doesn't want rebuild theses sites).
Here is my question, does anybody know for ST2 a way (or a plugin) to split screen and click on screen preview to go right to the code line just like dreamweaver preview does ?
Regards.
Answer is simple, you will never find something like that.
Try here - http://webdesign.about.com/od/windowshtmleditors/tp/windows-wysiwyg-editors.htm
WYSWIG html editors.
Try Sublime CodeIntel, as well says this page:
...This plugin brings a little of IDE functionality into ST2. This plugin reads all your code and is able to code-complete, jump into
definitions and function call tooltips. Although sometimes looks a
little buggy, it’s still worth having it around. It’s a huge time
saver, especially when you are dealing with other’s people code.
If is suitable for that project you can remove the package later.
I am searching for an IDE or a small editor which have an ability to "allocate some part of code to a new tab".
Lets say i have a 1000 line file.
I want to quickly edit just one method - 30 lines for example.
I mark these 30 lines, click something and i am editing these lines in a new tab.
And when i have edition finished, it applies to a 1000line file.
I am using mainly Linux but if there is something windows-only program i will test it and give a shot for windows.
Please help me (:
I am searching for an IDE or a small editor which have an ability to "allocate some part of code to a new tab".
This feature should be easy to implement in any scriptable editor. For example it took me less than a minute to write the following Zeus editor Lua macro that does exactly what you describe:
function key_macro()
screen_update_disable()
MarkCopyEx()
FileNew()
MarkPasteSmart()
screen_update_enable()
screen_update()
end
key_macro() -- run the macro
Zeus is a Windows based editor, but as I said before, this should be very easy to implement in any scriptable editor.
Files this large should be refactored and split anyway ;)
What's wrong with editing it in-place if you're going to merge it anyway? It's not like the editor will scale the font size to fit those 1000 lines onto your screen (right?!?)...
In case you desperately want a clear screen, about every editor should be able to quickly create a new file, let you copy, paste and edit the method there and let you copy it back. Yes, not as shiny as full IDE integration, but again: Why do you want to do this and why is it necessary?