If I have two frames in my GUI. (Assume 1st frame ="A" and 2nd frame="B").
when clicked on "A", it redirects to "B".
when Clicked on "B", it redirects to "A".
So it is continuously looping.
Is it possible to draw the Activity Diagram without adding the final node?
note: But anyone can click on the cross mark on top right corner and exit from the program. (Is that means I have to add final node to everywhere??)
You would model it with an interrupt flow like this:
The dashed boundary represents an interruptible region from where a flash-formed flow can exit at any time.
The Exit has not outgoing edges and thus ends the control flow. You might optionally add an outgoing flow to a flow final, though.
Alternatively, if there are many exceptions you could use this variant:
I doubt that is is really UML compliant, but as I say: "if it serves communication, it's fine". And from the context this looks rather evident.
Yes. An Activity ends when an Action ends and no other Action has the tokens it needs to start. You can find many fUML test cases that work like this, without explicit start and end nodes.
Related
I am new in doing an activity and currently, I am trying to draw one based on given description.
I enter into doubt on a particular section as I am unsure if it should be 'split'.
Under the "Employee", the given description is as follows:
Employee enter in details about physical damage and cleanliness on the
machine. For the cleanliness, there must be a statement to indicate
that the problem is no longer an issue.
As such, I use a foreach as a means to describe that there should be 2 checks - physical and cleanliness (see diagram in the link), before it moves on to the next activity under the System - for the system to record the checks.
Thus, am I on the right track? Thank you in advance for any replies.
Your example is no valid UML. In order to make it proper you need to enclose the fork/join in a expansion region like so:
A fork/join does not accept any sematic labels. They just split the control flow into several parallel ones which join at the end.
However, this still seems odd since you would probably have some control for the different inspections being entered. So I'd guess there's a decision which loops through multiple inspection entries. Personally I use regions only for handling interrupts. ADs are nice to a certain level. But sometimes a tabular text (like suggested by Cockburn) is just easier to write and read. Graphical programming is not the ultimate answer (unlike 42).
First, the 'NO' branch of the decision node must lead somewhere (at the end?).
After, It differs if you want to show the process for ONE or MULTIPLE inspections. But the most logical way is to represent the diagram for an inspection, because you wrote inspection without S ! If you want represent more than one inspection, you can use decision and merge node to represent loop that stop when there is no more inspection.
I have a situation where 3 options are presented to a user by a system:
Open PDF1.
Open PDF2.
Proceed.
The system instructs the user to read the PDFs, but doesn't enforce it.
So they're free to just click the proceed button and move on to the next screen.
I drew the following diagrams, but I feel like I've got it wrong somehow.
That's not correct this way. Your 2nd attempt isn't better at all. The bars will create parallel flows, but since you join them immediately it's actually a no-op in the first case. The bar will not be reached since it waits for 3 tokens where only one can actually arrive. In the 2nd case will never continue after the join since it only gets one token from the Provides... action but need 3 to continue.
Here's a cut part of what you need to do:
There's a merge node at first to capture the tokens coming from either the action on top or from the two left ones. After there there are two decisions going guarded to the actions at the left. The can be continued to the top (guard [read next]) or to the bottom (guard [acknowledge]). That way the user can repeat reading (or skip it completely) until he passes the Acknowledge action. There's a final merge node preceding that action.
Note that the read/ack guards should appear twice for each flow to make it a machine readable model. The texts here are just overlaid but a human can understand it anyway.
We're currently designing an application with an exit button, meaning the user can exit the application at any time. Now, we're not sure how to write this down.
Right now, we're thinking about doing it like shown in the picture below, because this is the only way we know how to do this. However, we feel like there must be an easier way. Also: if we do this for our whole application (which is quite big), we'd get a whole ton of decision and end nodes...
Your model looks ok. Instead of having multiple Final Flows you could lead all flows to a single one (just as an option).
Without knowing the exact requirements, here is another way:
The exit button is treated as exception. This could as well be written as
It is my first time doing a Petri net, and I want to model a washing machine. I have started and it looks like this so far:
Do you have any corrections or help? I obviously know its not correct, but I am a beginner and not aware of the mistakes you guys might see. Thanks in advance.
First comments on your net's way of working:
there is no arrow back to the off state. So once you switch on your washing machine, won't you never be able to switch it off again ?
drain and dry both conduct back to idle. But when idle has a token, it will either go to delicate or to T1. The conditions ("program" chosen by the operator) don't vanish, so they would be triggered again and again.
Considering the last point, I'd suggest to have a different idle for the end of the program to avoid this cycling. If you have to pass several times through the same state but take different actions depending on the progress, you have to work with more tokens.
Some remarks about the net's form:
you don't need to put the 1 on every arc. You could make this more readable by Leaving the 1 out and indicating a number on an arc, only when more than one tokens would be needed.
usually, the transitions are not aligned with the arcs (although nothing forbids is) but rather perpendicular to the flow (here, horizontal)
In principle, "places" (nodes) represent states or resources, and "transitions" (rectangles) represent an event that changes the state (or an action that consumes resources). Your naming convention should better reflect this
Apparently you're missing some condition to stop the process. Now once you start your washing will continue in an endless loop.
I think it would be nice to leave the transition graphics unshaded or unfilled if it is not enabled. Personally I fill it green if it is enabled.
If you want someone to check if you modeled a logic properly in your Petri Net then it would be nice if you include a description of your system logic in prose.
My question actually consists of two questions regarding the same process modelling in an activity diagram.
The process in short:
Joe uploads a file into a portal, this portal transfers the file to our server where it is checked for errors. In case of an error the server sends a message to the portal where Joe can see this (if he is still logged in or on his next visit) and upload his file again (hopefully without the errors this time). In case of success the server will also notify the portal but Joe doesn't have to take any action so we are not interested in the result. As the file is okay the system now wait for Sarah who has to start the processing of the file manually after which the process completes.
In the below diagram I have drawn this, including my two problems.
Am I allowed to let the "Notify User of succes" (I spotted the spelling mistake, thank you) in the Portal swim lane to terminate like this? If I were to put a ActivityFinal behind this that would mean the entire process would end right there which is not what we want.
Am I allowed the to join before the "process file" without a fork or do I need a fork at the very start spanning all across form Joe to Sarah?
The point of this is nothing more than an attempt to find a valid UML solution to solve this, in my own diagrams I would just do it like in the example.
Thanks in advance!
I'm not sure if it forbidden to leave an activity node without outgoing links, but for clarity (since users may think this is a mistake) I would use a flow final node (circle with x inside). This node simply terminates the flow and does not affect other flows in the diagram.
You can use a join node anywhere you want, independent if you previously did a fork or not. So what you did is correct.
I would in that case make a arrow from 'Notify user of success' to the join element, delete the arrow from the fork to the join element, and create an arrow from the fork to 'Start process'.
As far as I know the join element must have a fork at some point before it.
You can have many activity end nodes in the diagram, but I think you can't have more than one start nodes.
You have no activities on the activities diagram, do you think it is OK? No.
When a lane receives something, it should be shown as message (writing on the arrow), not as an action. Sending and receiving are special things, that are shown not as actions, but as arrow ends or if they are important as activities' parameters - border rectangles.
As for fork/join combining, it is absolutely OK.
Here is an example diagram, I have put useful for you elements on it. It doesn't mean you should copy it, only use it as a source.