I cannot sign in to Kentico client portal, keep seeing that username and password is not correct, when trying the forgotten password link it prompts me
no user found
"when trying to sign-up with same email address it prompts me
email already exist
It seems my account has been disabled ,but how can I enable it back ?
I've had this in the past when I first partnered with Kentico. Finally after several years I was tired of it and got it worked out by contacting Support at Kentico.com. They were able to direct me to the person who handles the different portals and was able to clean them up. Be sure to give them all the email addresses you are using.
Related
I'm working on my first MERN fullstack project (an e-commerce demo). I have almost finished the authentication part, but I am having doubts about how to manage the users who have the same registration email both through custom sign-in and google login on the MongoDB database.
While doing various researches, I noticed that one of the methods used is the following:
1- If the email of the user who logs in via google login is already saved in the database as the same user had already registered via traditional sign-up, a new user will not be created in the database, but with both methods of signing -in we will point to the same user already saved with that email.
2- If there are no users saved in the database with that email (as the user logged in for the first time with google login and did not first register traditionally), once the user logged in with google login, it will be saved to the database for the first time.
However, this method presents problems with regard to the second type of users mentioned above.
In fact, if we merge the accounts with the same email on the database, if the user logs in for the first time with google, no password will be saved on the database. Therefore, if the same user decides in the future to log in in the traditional way, he will not be able to do so because he will not be able to fill in the password field.
How to solve this problem?
Usually sites with the "first Google login immediately creates an account" have 2 solutions to this problem:
As part of the "immediately create an account", they directly ask the user to choose a password.
Alternatively, their "Change password" section allows creating a password should there be none yet. Therefore the account is indeed passworld-less at the beginning, but the user can opt to add a password.
For the 2nd solution, there's the small problem that if the user loses access to their Google account and didn't set a password, they're locked out. Rare case which might not be worth looking out for. And perhaps your Customer Service can still help them out.
I'm in a bind with Azure login account. I've forgotten my password for my account that I use for a client's DevOps. It wasn't until I ended up created another account today to troubleshoot the problem that I might understand the issue, but still can't fix it.
About a year ago, my client added me as a Guest in their Active Directory. I did not have an active directory myself. I got the notice from Microsoft in an invite email to get started, which created an account to get access to their Azure Portal and DevOps. I've been logged in for a year, but was trying test a feature which required me to login to DevOps during the process. I tried what I thought was my password, but that didn't work. No problem, I'll just click on the reset password feature. That ended up informing me that "password reset isn't properly set up for your organization." Knowing who setup my account up, I ask them to reset my password. The response was we do not have control to reset your password because you're a guest.
Through several discussions, and seeing what was available to them, and how a Guest was set up, it was suggested to setup an account within Microsoft for the email. I did that, and when I went back to try and login to their portal, I was presented with two options after I entered my email address. There was a work account and a personal account. Both with the same email address. The work account indicated it was created by "your IT department". Which we did not create this, it was a result of the client adding us as a guest, then finishing the process to gain access. So I can only assume, either an active directory was created for my domain, or I was added to a generic active directory.
In either case, I still can't change the password for the work account, and researching has not helped, as it keeps resetting my personal account.
Does anyone have any suggestions on how to resolve this issue?
Here is what I'm currently seeing.
Thank you,
Marc
You don't have an AAD tenant. So I assume that your account is an Microsoft personal account.
Although you are added as the guest user in your client's tenant, the password management is not handled by that tenant. It is still handled by Microsoft personal account.
You can reset your password here: click on Sign In, enter your account and click on Forgot password?.
I am doing the Azure fundamentals course and require the sandbox environment to do the course.
But despite refreshing the page a hundred times( following the instruction from the troubleshooting page ) I see the same error.
`Email is required to activate a sandbox
Your Microsoft account must be linked to a valid email to activate a sandbox. Go to Microsoft Account Settings to link your email and try again.`
Not sure why I am seeing this error as I am already logged in.
Any ideas that might help?
In my case the email address was verified, yet I still had the same issue.
Here is what I do to make Azure Sandbox work:
Log out from https://learn.microsoft.com
Log out from https://account.microsoft.com
Log in using email address on https://learn.microsoft.com
in my case, long ago, I created the account with an alias when I signed up for skype. Recently I added the #outlook.com email.
I fixed the issue by login using the email #outlook instead of my skype login.
I was also facing the same issue. This was working for me a few months back. Also my account alias seems to be verified since there is no "Verify" button against it on the "Manage how you sign in" page.
I had created the Microsoft account with a username and email id(alias) logging in with the email id solved this issue. This check for email id must have been added recently, because I'd run the sandbox with my username login multiple times in the past.
Hope this helps!
It seems that you haven't verified your email address linked to your MSA.
When you sign up for a Microsoft account or add an email address to your account, a request will be sent to that email for you to verify. To finish the process, just follow the verification link in the email. If you need a new verification email:
Sign in to Manage how you sign in to Microsoft.
A Verify button will be next to any unverified aliases.
Click Verify next to your email address, and then click Send email.
See details here.
It used to work for me too, until it didn't.
This helped: https://learn.microsoft.com/answers/questions/7694/sandbox-activation-failing-1.html
Essentially, what worked for me was to go to the Profile (click the icon at the top right of the page and click "Profile"), under "Settings", add my email address to the "Email for notifications" field.
Then make sure to log out and then back in and try again.
Navigate to Profile
Click Settings
locate "Manage your email preferences", enter your email address and press save.
Retry and it should work. At least it did for me
I had this same issue when working on some Azure training courses.
When I try to activate the sandbox, I get the error:
Email is required to activate a sandbox or lab
Your Microsoft account must be linked to a valid email to activate a sandbox or lab. Go to Microsoft Account Settings to link your email and try again.
For more information, please check the troubleshooting guidance page.
Here's how I solved it:
The problem was that I was logging in with my username instead of my full email.
So instead of my-username#outlook.com, I was using the username my-username.
All I had to do was to log out from https://learn.microsoft.com and https://account.microsoft.com
Afterwhich, I logged in to https://learn.microsoft.com/ with my email which is my-username#outlook.com
This time everything worked fine.
That's all.
I hope this helps
Just Sign out yourself, and Sign in using your email address. it will solve the issue.
Make sure you have linked your outlook email.
If its already linked then log out from MS Learn and try login again.
Here: https://learn.microsoft.com/
It worked for me.
I just ran into this problem.
I had added an outlook.com email alias to my account and set it as the primary.
No matter how I logged in, be it the new outlook.com address or my original hotmail.com address, I would get that error.
Setting my original hotmail.
When users in an MVC application with Google/Facebook/Twitter authentication, register for the first time, they go to the ExternalLoginConfirmation.cshtml page. There they are asked for their username, but are only allowed to fill in an email address, according to the ExternalLoginConfirmationViewModel model.
Is it set to email for a reason? In code it's creating a new applicationuser to store the user, but it's using just-entered-email for both username & email.
Can I go horribly wrong when I allow users to enter username of their choosing, and store email address as I got it from Google/Facebook/Twitter, etc?
I think the MVC5 registration flow is flawed by default, and needs to be reworked.
by trusting the default provider's emails (set email is auto confirmed from Google+, Yahoo, MS, and Facebook).
don't let the user enter an email+username, as he can register ANY email he enters in the box, straight to the AppUsers table.
MVC5 needs to create a User if not done so already at the ExternalLoginConfirmation method.
the default login password would be set to something blank, with links to reset it if needed (or totally disabled).
This would allow the users to register on any massively trusted providers automatically, it would link accounts together as long as their email is the same, and allow to unlink accounts once again.
The way MVC5 is setup right now is half-baked and broken, for no apparent reason.
I have taken over support for a Drupal site, and need to change the registration process so that users enter their password when registering, rather than receiving an email with a system generated password. This should be as simple as un-checking the "Require e-mail verification when a visitor creates an account" check box, however, the password field does not appear. Unfortunately, the person who set up the site originally is not available.
I've checked the various modules we have to see if one of them is the cause, I've checked our theme/stylesheet, and confirmed that we did not change the user.module at all. I've tried installing LoginTobaggan.
I do know that Drupal knows that the box is not checked, as it sends out the email for no email verification required.
Any ideas on what could prevent the password field from appearing or other places I could check?
example.com/admin/user/settings
uncheck:
Require e-mail verification when a visitor creates an account