I have a question in Excel and need your help!
I can do this if it was static problem but I need my end result to adjust to my input in the table because the year sometimes the year finishes sooner or later or is different or the number of activities vary.
Initial table (It always go in chronological order and it only has 1 or nothing. (I put 0 there because I wanted to put space and didn't know how to do it. also Number of activities may vary)
+----------------+------+------+------+------+------+------+
| year | 2016 | 2016 | 2016 | 2017 | 2017 | 2017 |
+----------------+------+------+------+------+------+------+
| month calendar | 10 | 11 | 12 | 1 | 2 | 3 |
| month project | 1 | 2 | 3 | 4 | 5 | 6 |
| Activity 1 | 1 | 1 | 0 | 0 | 0 | 0 |
| Activity 2 | 0 | 0 | 1 | 1 | 1 | 1 |
| Activity 3 | 0 | 0 | 0 | 1 | 1 | 0 |
| Activity 4 | 0 | 1 | 1 | 0 | 0 | 0 |
| Activity 5 | 1 | 1 | 1 | 1 | 1 | 1 |
+----------------+------+------+------+------+------+------+
I want in another sheet
+---------------+------------+------------+------------+------------+
| Activity year | 2016 | | | |
| | | | | |
| Activity 1 | Activity 2 | Activity 3 | Activity 4 | Activity 5 |
| 25,0% | 12,5% | 0,0% | 25,0% | 37,5% |
| | | | | |
| Activity year | 2017 | | | |
| | | | | |
| Activity 1 | Activity 2 | Activity 3 | Activity 4 | Activity 5 |
| 0,0% | 37,5% | 25,0% | 0,0% | 37,5% |
+---------------+------------+------------+------------+------------+
Now imagine that in the "another sheet" I have nothing and I want the result to adjust to the initial table. How can I do this?
Sorry for bad editing but I can't do better.
Any help is good thank you, I answer any question you might have.
I'm going to add something that is related to this and I also need. I need a formula to get the number of different activities per year that happen at least once for my calculations later. In this case it would be a formula for 2016 which the result is 4 and 2017 is 3.
Related
I have an Excel/Google Sheets table in which some rows contain blank cells in between non-blank cells. I would like to count from left to right. I have used the formula COUNTA(A2:F2) but it cannot achieve what I want. This is a sample of the outcome I would like to get, with the Personalized count that I am seeking to achieve and the classic COUNTA:
I think that the task is slightly different from what you describe in the question, you want to count until blank and not between not blank cells.
So I made this working example
+---+------+------+------+------+------+------+-------+
| | A | B | C | D | E | F | G |
+---+------+------+------+------+------+------+-------+
| 1 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | Count |
| 2 | 1 | 1 | 1 | 1 | 1 | 1 | 6 |
| 3 | 1 | 1 | 1 | 1 | | | 4 |
| 4 | 1 | | 1 | 1 | 1 | 1 | 1 |
| 5 | 1 | 1 | 1 | | | 1 | 3 |
+---+------+------+------+------+------+------+-------+
where cell G2 contains the following:
=IFERROR(MATCH(1;--(A2:F2="");0)-1;COUNTA(A2:F2))
is it right for you?
Is there a way by using a DAX measure to create the column which contain text values instead of the numeric sum/count that it will automatically give?
In the example below the first name will appear as a value (in the first table) instead of their name as in the second.
Data table:
+----+------------+------------+---------------+-------+-------+
| id | first_name | last_name | currency | Sales | Stock |
+----+------------+------------+---------------+-------+-------+
| 1 | Giovanna | Christon | Peso | 10 | 12 |
| 2 | Roderich | MacMorland | Peso | 8 | 10 |
| 3 | Bond | Arkcoll | Yuan Renminbi | 4 | 6 |
| 1 | Giovanna | Christon | Peso | 11 | 13 |
| 2 | Roderich | MacMorland | Peso | 9 | 11 |
| 3 | Bond | Arkcoll | Yuan Renminbi | 5 | 7 |
| 1 | Giovanna | Christon | Peso | 15 | 17 |
| 2 | Roderich | MacMorland | Peso | 10 | 12 |
| 3 | Bond | Arkcoll | Yuan Renminbi | 6 | 8 |
| 1 | Giovanna | Christon | Peso | 17 | 19 |
| 2 | Roderich | MacMorland | Peso | 11 | 13 |
| 3 | Bond | Arkcoll | Yuan Renminbi | 7 | 9 |
+----+------------+------------+---------------+-------+-------+
No DAX needed. You should put the first_name field on Rows and not on Values. Select Tabular View for the Report Layout. Like this:
After some search I found 4 ways.
measure 1 (will return blank if values differ):
=IF(COUNTROWS(VALUES(Table1[first_name])) > 1, BLANK(), VALUES(Table1[first_name]))
measure 2 (will return blank if values differ):
=CALCULATE(
VALUES(Table1[first_name]),
FILTER(Table1,
COUNTROWS(VALUES(Table1[first_name]))=1))
measure 3 (will show every single text value), thanks # Rory:
=CONCATENATEX(Table1,[first_name]," ")
For very large dataset this concatenate seems to work better:
=CALCULATE(CONCATENATEX(VALUES(Table1[first_name]),Table1[first_name]," "))
Results:
I am working in Excel 2016. I am trying to figure out how many projects I have that have not had any part of it started. For instance if my project id is 203784 and it has 3 parts to it where 2 are Complete and 1 was Not Started. I would not want to count that. If the project had 3 parts and 2 were Not Started 1 was assigned. I would want to count that as 1. Thank you in advance you your assistance.
+----+------------+------------------+-------------+
| | A | B | C |
+----+------------+------------------+-------------+
| 1 | Project ID | Position | Status |
| 2 | 203784 | Staff | Complete |
| 3 | 203784 | Staff | Complete |
| 4 | 203784 | Staff | Not Started |
| 5 | 203785 | Maintenance | Complete |
| 6 | 203785 | Maintenance | In Progress |
| 7 | 203786 | Grounds | Complete |
| 8 | 203787 | Nurse | Complete |
| 9 | 203788 | Teacher | Complete |
| 10 | 203788 | Teacher | Complete |
| 11 | 203788 | Teacher | Complete |
| 12 | 203789 | Transportation | Complete |
| 13 | 203789 | Transportation | Complete |
| 14 | 203789 | Transportation | Complete |
| 15 | 203790 | Evacuation | Complete |
| 16 | 203790 | Evacuation | Complete |
| 17 | 203791 | Implementation | Complete |
| 18 | 203792 | Knowledge Base | Not Started |
| 19 | 203792 | Knowledge Base | Not Started |
| 20 | 203793 | Janitor | Not Started |
| 21 | 203794 | Public Relations | In Progress |
| 22 | 203795 | HR | Complete |
| 23 | 203796 | Admin | Complete |
+----+------------+------------------+-------------+
In this example. I would only want the count to show a total of 2. For project numbers 203792 and 203793.
One way would be to add a column (say Count) populated as:
=COUNTIFS(A:A,A2,C:C,"Complete")+COUNTIFS(A:A,A2,C:C,"In Progress")
and then create a PivotTable with Count as Filters and Project ID for Rows. Select 0 for the filter.
I want to compose sales table for purchased and sold items to see total profit. It's easy to do when items are purchased and sold individually or as a lot. But how to handle situation when one buys collection of items and sells them one by one. For example, I buy a collection (C) of a hammer and a screwdriver and sell tools separately. If I would enter data into simple table as in the image, I would get wrong profit result.
When there are only two items, I could divide their purchase price randomly, but when there are many items and not all of them are yet sold, I can't easily see if this collection already made profit or not.
I expect correct output of profit. In this case collection cost was 10 and selling price of all collection items was 13. Thus it should show profit of 3, not loss of -7. I was thinking of adding 2 new column, like IsCollection, CollectionID. Then derive a formula, which would use either simple subtraction or would check price of a whole collection and subtract it from the sum of items that belong to that collection. Deriving such formula is another question... But maybe there is an easier way of accomplishing the same
I added a column COLLECTION to identify item who belong to a collection.
Then I used SUMIF to sum sell price for items which belong at the same collection.
Then I used IF in Profit column to use summed sell price or single sell price.
You need to define in some formula a range of cell (see below).
Problem: you can't add profit values to obtain Total profit.
I used opencalc (but it should be almost the same in Excel).
Content of
SUM_COLL (row2):
=SUMIF($A$1:$A$22;"="&A2;$D$1:$D$22)
SUM_COLL (row3):
=SUMIF($A$1:$A$22;"="&A3;$D$1:$D$22)
and so on.
Profit (row2):
=IF(A2<>"";E2-C2;D2-C2)
Profit (row3):
=IF(A3<>"";E3-C3;D3-C3)
+------------+-----------+-------------+------------+----------+--------+
| COLLECTION | Item name | Purch Price | Sell Price | SUM_COLL | Profit |
+------------+-----------+-------------+------------+----------+--------+
| | A | 1 | 1.5 | 0 | 0.5 |
+------------+-----------+-------------+------------+----------+--------+
| | B | 2 | 2.1 | 0 | 0.1 |
+------------+-----------+-------------+------------+----------+--------+
| C | C1 | 10 | 7 | 27 | 17 |
+------------+-----------+-------------+------------+----------+--------+
| C | C2 | 10 | 6 | 27 | 17 |
+------------+-----------+-------------+------------+----------+--------+
| D | D1 | 7 | 15 | 23 | 16 |
+------------+-----------+-------------+------------+----------+--------+
| | E | 8 | 12 | 0 | 4 |
+------------+-----------+-------------+------------+----------+--------+
| C | C3 | 10 | 14 | 27 | 17 |
+------------+-----------+-------------+------------+----------+--------+
| D | D2 | 7 | 8 | 23 | 16 |
+------------+-----------+-------------+------------+----------+--------+
| | | | | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+
| | | | | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+
| | | | | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+
| | | | | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+
Update:
I added two more column to make Profit summable:
COUNT_COLL (row2):
=COUNTIF($A$1:$A$22;"="&A2)
COUNT_COLL (row3):
=COUNTIF($A$1:$A$22;"="&A3)
Profit_SUMMABLE (row2)
=IF(A2<>"";(E2-C2)/G2;D2-C2)
Profit_SUMMABLE (row3)
=IF(A3<>"";(E3-C3)/G3;D3-C3)
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| COLLECTION | Item name | Purch Price | Sell Price | SUM_COLL | Profit | COUNT_COLL | Profit_SUMMABLE |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | A | 1 | 1.5 | 0 | 0.5 | 0 | 0.5 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | B | 2 | 2.1 | 0 | 0.1 | 0 | 0.1 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| C | C1 | 10 | 7 | 27 | 17 | 3 | 5.6666666667 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| C | C2 | 10 | 6 | 27 | 17 | 3 | 5.6666666667 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| D | D1 | 7 | 15 | 23 | 16 | 2 | 8 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | E | 8 | 12 | 0 | 4 | 0 | 4 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| C | C3 | 10 | 14 | 27 | 17 | 3 | 5.6666666667 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| D | D2 | 7 | 8 | 23 | 16 | 2 | 8 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | | | | 0 | 0 | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | | | | 0 | 0 | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
| | | | | 0 | 0 | 0 | 0 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
...
...
| TOTAL | | | | | 87.6 | | 37.6 |
+------------+-----------+-------------+------------+----------+--------+------------+-----------------+
I'm trying to find a solution without macros in excel for following problem:
There is a table containing ratings of a student for different time periods.
So the rating of the student with ID=1 was 1 from January to April and 3 from Mai to June.
Two other students had a constant ranking (6 and 9) from January to June
| A | B | C |D |
---| ----|------------|------------|-------|
1 | ID | START | END |RANKING|
2 | 1 | 01.01.2014 | 30.04.2014 | 1 |
3 | 1 | 01.05.2014 | 30.06.2014 | 3 |
4 | 2 | 01.01.2014 | 30.06.2014 | 6 |
5 | 3 | 01.01.2014 | 30.06.2014 | 9 |
Next table contains IDs (y axis) and Months (x axis)
| F | G | H | I | J | K | L |
---| ----|--------|--------|--------|--------|--------|--------|
1 | ID | 201401 | 201402 | 201403 | 201404 | 201405 | 201406 |
2 | 1 | | | | | | |
3 | 2 | | | | | | |
4 | 3 | | | | | | |
And I wish to feel this second table like this:
| ID | 201401 | 201402 | 201403 | 201404 | 201405 | 201406 |
| ----|--------|--------|--------|--------|--------|--------|
| 1 | 1 | 1 | 1 | 1 | 3 | 3 |
| 2 | 6 | 6 | 6 | 6 | 6 | 6 |
| 3 | 9 | 9 | 9 | 9 | 9 | 9 |
I tried to use Index and Match, but without any good results because I haven't found a posibility to use IF (if (
Could anybody help?
You can get what you're looking for with SUMPRODUCT
Given the layout you provided, this formula should work when put in G2 and filled down and over
=SUMPRODUCT(--($A:$A=$F2),--($B:$B<=G$1),--($C:$C>G$1),$D:$D)
That looks in column A for an ID matching F2, then for every one it finds of those:
It checks the date in column B against the date in G1
It checks the date in column C against the date in G1
If all criteria match, it returns the value in Column D
This assumes you only have one entry for each period, otherwise it will sum them.
Also, you can use SUMIFS, it's a little less easy to read but I think it's slightly more efficient than SUMPRODUCT (I'm not positive, just anecdotal evidence from usage)
=SUMIFS($D:$D,$A:$A,"="&$F3,$B:$B,"<="&G$1,$C:$C,">"&G$1)
It does the exact same thing, just with different syntax.