I use a script which after execution opens different tabs and connects to different servers(using ssh). Now along with that,I want to run another command (say 'pwd').So how to do that?
gnome-terminal --tab -e 'ssh user#ip1' --tab -e 'ssh user#ip2'
This opens 2 tabs and connects to corresponding ip.After ssh in every tab I want to run another command, so that there will be two tabs,and after connecting to ip it will run specified command
You need to use SSH ability to execute remote command, like this:
gnome-terminal --tab -e "ssh -A -t user#ipbridge \"ssh -t user#ip1 'pwd; /bin/bash -i'\""
Note the /bin/bash -i after the command. It is needed, because otherwise ssh will exit after the command.
Use ansible, fabric or any automation tool like any of these to do that you want. this tools allow execute a same command via ssh in multiple machines at same time in simple way.
using ansible you only need to do somthing like this
ansible <your-list-of machine> -m shell -a "your command"
example
ansible ip1 -m shell -a "echo $TERM"
Related
I place this ssh call in the following a shell script on our Linux box named "tstz" and then call it with the linux "at" command in order to schedule it for later execution.
tstz script:
#! /bin/ksh
/usr/bin/ssh -tt <remote windows server> pmcmds ${fl} ${wf} < /dev/null >/tmp/test1.log 2>&1
at command syntax:
at -f tstz now + 1 minute
The ssh call executes remote command as expected, but the ssh connection closes immediately before the remote command has completed. I need the connection to stay open until the remote command has completed and then return control to the tstz script with an exit status.
This is the error I get in the /tmp/test1.log:
tcgetattr: Inappropriate ioctl for device
^[[2JConnection to dc01nj2dwifdv02.nj.core.him closed.^M
NOTE: When using the "at" command to schedule tstz, if I don't use -tt, the ssh command will not execute the remoted command "pmcmds ${fl} ${wf}". I believe this is because a terminal is required. I can however run tstz from the Linux command prompt in the foreground without the -tt on the ssh command line and it runs as expected.
Any help would be greately appreciated. Thanks!
As I understand you need to specify a command to execute on the REMOTE machine after successfully connecting to the server, not on LOCAL machine.
I use following command
ssh -i "key.pem" ec2-user#ec2-XX-XX-XX-XX.us-west-2.compute.amazonaws.com -t 'command; bash -l -c "sudo su"'
where you should replace "sudo su" with your own command, I guess with "pmcmds DFD_ETIME wf_TESTa"
So, try to issue, maybe
/usr/bin/ssh -tt <remote windows server> 'command; bash -l -c "pmcmds DFD_ETIME wf_TESTa"'
P.S. I have discovered interesting service on google called "explainshell"
which helped me to understand that "command;" keyword is crucial inside quotes.
I have seen some similar questions asked but the solutions don't seem to work in my case.
I am trying to SSH into a specific screen instance on a Node machine and then execute some commands
My current process is this:
On the remote machine I create a screen instance:
screen -dmS "my_screen"
From my local machine I do something like:
ssh <user>#<remote> -a -x -t screen -x -r my_screen -X stuff 'ruby my_script.rb'
but the output is just:
Connection at (ip) closed.
and the ruby script is not run.
If I separate the commands then the script runs correctly eg:
ssh <user>#<remote> -a -x -t screen -x -r my_screen
it connects to the screen, and then I manually enter:
ruby my_script.rb
exit
Then the script executes in the screen as intended.
What is the correct way to send commands to a screen?
In your second example, you are executing the command by typing it into the console. If that is the behavior you want to emulate, you can use the stuff command to have screen paste your text into the console to execute it.
ssh <user>#<remote> -a -x -t screen -x -r my_screen -X stuff \"ruby my_script.rb^M\"
(Note the ^M was generated using CTRL-V, CTRL-M).
This won't display anything to your open terminal, but when you reconnect to the screen, you should see the output of your command (assuming the screen was at a console window at the time you sent the command, which is the risk with this approach).
You should be using exec instead of stuff. As the name implies, exec executes commands inside the screen
ssh <user>#<remote> -a -x -t screen -x -r my_screen -X exec ruby myscript.rb
Using osascript, I'm able to tell the Terminal application to open an ssh connection in a separate terminal window, however, I run into errors when trying to pass bash variables in the script.
This script works just fine:
osascript -e 'tell app "Terminal"
do script "ssh user#hostname -p port -L 9999:localhost:80 -i keyfile"
end tell'
...more commands...
But running a script like this one...
read -p "Port: " prt
read -p "Localhost port: " lhprt
osascript -e 'tell app "Terminal"
do script "ssh user#hostname -p \"$prt\" -L \"$lhprt\":localhost:80 -i keyfile"
end tell'
...more commands...
It doesn't pass the variables, i.e. the command passed in the new terminal window is
ssh user#hostname -p "$prt"
How might I format this to make it so my bash variables get fed through?
Just invert the quote type
Using single quote is preventing the shell to expand your parameters
Edit:
You can close the string just around your variables too.
I.e.
'this is a '$variable' in a "string".'
I want to run multiple commands automatically like sudo bash, ssh server01, ls , cd /tmp etc at server login..
I am using Remote command option under SSH in putty.
I tried multiple commands with delimiter && but not working.
There is a some information lacking in your question.
You say you want to run sudo bash, then ssh server01.
Will sudo prompt for a password in your remote server?
Assuming there is no password in sudo, running bash will open another shell waiting for user input. The command ssh server01 will not be run until that bash shell is exited.
If you want to run 2 commands, try first simpler ones like:
ls -l /tmp ; echo "hi there"
or if you prefer:
ls -l /tmp && echo "hi there"
Does this work?
If what you want is to run ssh after running bash, you can try :
sudo bash -c "ssh server01"
That is probably because the command is expected to be a program name followed by parameters, which will be passed directly to the program. In order to get && and other functionality that is provided by a command line interpreter such as bash, try this:
/bin/bash -c "command1 && command2"
I tried what I suggested in my previous answer.
It is possible to run 2 simple commands in putty separated by a semicolon. As in my example I tried with ls and echo. The remote server runs them and then the session closes.
I also tried to ssh to a remote server that is configured for not asking for a password. In that case, it also works, I get connected to the 2nd server and I can run commands on it. Upon exit, the 2 connections are closed.
So please, let us know what you actually need / want.
You can execute two consecutive commands in PuTTY using a regular shell syntax. E.g. using ; or &&.
But you want to execute ssh server01 in sudo bash shell, right?
These are not two consecutive commands, it's ssh server01 command executed within sudo bash.
So you have to use a sudo command-line syntax to execute the ssh server01, like
sudo bash ssh server01
We recently got SSH setup on our Windows boxes so we could eliminate the need for disc mounts on our Linux machines. We are using Pentaho and I am writing a shell script that will, from a Linux box, SSH into the Windows box and execute a perl script.
I have able to write in a way to SSH into the windows box and switch to the directory that holds the Perl scripts that I need to execute, I just can't figure out how to actually execute them.
This is what I have:
#!/bin/sh
ssh -t xxxxx#xxxxx "cd /path/to/script/ /path/to/perl.exe HelloWorld.pl"
I have also tried:
#!/bin/sh
ssh -t xxxxx#xxxxx "cd /path/to/directory/with/perl/script" \
"/path/to/perl.exe HelloWorld.pl"
Both attempts result in a short delay and then a "disconnected from xxxxx" and the perl does not run. I can do all of these steps manually through a shell, but can't seem to get them working in script form. As a note, the only way I've been able to execute the perl scripts is if have the shell in the directory the perl script is in.
You need to use either a semi colon to end your statements, or execute with one statement.
try the following:
ssh xxxxx#xxxxx "cd /path/to/script/; /path/to/perl.exe HelloWorld.pl"
or:
ssh xxxxx#xxxxx "/path/to/perl.exe /path/to/script/HelloWorld.pl"
In the Windows command shell, you can use && like in a Unix-shell. If you expect the first command to succeed,
ssh -t xxxxx#xxxxx "cd /path/to/script/ && /path/to/perl.exe HelloWorld.pl"
will work.