I'm trying to expand the actions of a Philips Hue Tap Switch by recognising multiple slow and fast presses. Philips API mentions the "ddx" and "stable" operators but has no detail. Does anyone know where they are fully spec'd?
Looking through the rules set up by the Philips app, I found "Go to sleep fade" which uses "ddx" to trigger an action after a 1 minute interval:
"address": "/sensors/4/state/flag",
"operator": "ddx",
"value": "PT00:01:00"
Still looking for usage of "stable/not stable".
stable/not stable evaluate if a value has/has not changed for a given time. It will not trigger a rule change on it's own, only in conjunction with other conditions. Syntax is the same as ddx.
The following condition would evaluate true if motion was detected after a period of 30 minutes following no motion detection.
"address":"/sensors/1/state/presence","operator":"eq", "value":"true",
"address":"/sensors/1/state/presence","operator":"stable", "value":"PT00:30:00"
Related
I feel silly asking this.. but its doing my head..
if I use 'https://maps.googleapis.com/maps/api/place/autocomplete/json' and set the input parameter to say - 'Palazzo Cast' I will get about 5 suggestions - none of which will be the one I'm looking for. if I set input to 'Palazzo Castellania' I will get zero results - even though there is a place called this (see below). I've set the region parameter to 'mt'...
If I use 'https://maps.googleapis.com/maps/api/place/findplacefromtext' and set the input parameter to 'Palazzo Castellania' - I will get 'the Ministry of Health' - which is correct - however, if I put a partial string in I'll get only a single candidate which will be something different - there doesn't seem to be a way to get multiple place candidates?
I'm guessing from an API side - I have to do a multi-step process - but it would be good to get some input.
My thoughts:
I start with 'https://maps.googleapis.com/maps/api/place/autocomplete/json' - if I get an empty result, I try 'https://maps.googleapis.com/maps/api/place/findplacefromtext'
if I get a single result from either then I can pass the placeID to the places API to get more detailed data.
Make sense? It feels argly..
Edit
So watching how https://www.google.com.mt/ does it... while typing it uses suggest (and never gives the right answer, just like the API) and then when I hit enter it uses search and gives the correct answer... leading me to the conclusion that there is actually two databases happening!
Basically "its by design".. there is no fix as of Feb 2023.. My thoughts are to cache results and do a first search against that otherwise I'll probably use bing or here
I installed the Kite autocomplete for Python (Anaconda-Spyder is my main IDE , though I also use SublimeText)
And i get this pic:
Kite Pro ripping me off
(Even when I do not get any starred autocompletions of any sort ...)
Isn't it supposed to say 3 starred completions left today??
Even when i sign out and back in , uninstall Kite, clear my registry and remove temp and program files, i notice it somehow knows that I have used up some of its 30 completions and gives me only 30 per day
Even if I sign out of Kite (no way for it to know I have an account with a Pro free trial , right?? ),I still get only 30 completions per day, and after that kite is "locked" - null completions today ...
And i don't even get the Starred completions - the Pro completions
So is it a mistake on my installation ? Will adding Kite to my PATH help?? (I seriously doubt it )
Or is it a bug on the devs' side ??
Any help regarding this matter would be appreciated ...
I simply cannot stand the fact that my bro gets FREE autocompletions per day, and that too unlimited ones at that ( which I guess is the free tier of Kite , since he gets only 3 starred ones)
I think there might be a bug on Kite's side.
However, I do not face the problem mentioned above :
https://i.stack.imgur.com/259T8.png |
I receive unlimited free tier auto-completions and only 3 Pro completions.Hope this answer helps you!
In the TI-BASIC programming language (Specifically TI-84+), how do you create input forms, such as the ones included in the default apps on the TI-84+.
The image included here shows an example of what I'm trying to create: A menu that you can scroll through and input multiple variables freely before executing a function
Additionally, is it possible to make this menu dynamically-updating as variables are entered?
You've set a rather tall order for TI-Basic to fill. user3932000 is correct; there is no built in function to create an input form of the type you request.
However, there is nothing stopping you from creating an interactive interface yourself. Creating it from scratch will be a time consuming and, it will consume a significant amount of memory on your calculator. There is no boilerplate code you plug your variables into to get the results you want, but you might have some luck modeling it after this quadratic solver I wrote.
ClrHome
a+bi
Output(1,1," QUADRATIC
Output(2,1," AX²+BX+C
Output(3,1,"ZEROS:
Output(6,1,"A=
Output(7,1,"B=
Output(8,1,"C=
DelVar YDelVar D
" →Str1
While Y≠105
getKey→Y
If Ans
Then
Output(X,4,Str1
Output(3,7,Str1+Str1+Str1+"
End
X+(Ans=34)-(Ans=25
If Ans<6:8
If Ans>8:6
Ans→X
Output(Ans,16,"◄
D(Y≠45→D
If Y=25 or Y=34
sum({A,B,C}(X={6,7,8→D
If Y=104:⁻D→D
10not(Y)+Y(102≠Y)-13int(Y/13(2>abs(5-abs(5-abs(Y-83
If Ans≤9
D10+Ans-2Ans(D<0→D
If X=6:D→A
If X=7:D→B
If X=8:D→C
If A
Then
2ˉ¹Aˉ¹(⁻B+{1,⁻1}√(B²-4AC
Else
If B
Then
⁻C/B
Else
If C
Then
"No Zeros
Else
"All Numbers
End
End
End
Output(3,7,Ans
Output(6,3,A
Output(7,3,B
Output(8,3,C
End
ClrHome
Ans
Here's a GIF of what it does for you.
With a little more work. This code could be used on the Graph screen instead of the home screen, giving more option in terms of layout and design.
In the TI-BASIC programming language (Specifically TI-84+), how do you create input forms, such as the ones included in the default apps on the TI-84+.
There are many ways to ask for input in your program:
Prompt: Asks for input and stores it in a variable. For example, Prompt A. Simplest way to ask for input, but not very visually appealing.
Input: Similar to the Prompt command, except that now you can include text within the input. For example, Input "What is your name?",A.
Menu(: Multiple choice input, and each choice is connected to a Lbl marker somewhere else in the script. Much like the error screen with the quit/goto choices that you've probably seen. For example, Menu("Are you a boy or a girl?","Boy",B,"Girl",G).
getKey: Checks if a certain key is pressed, and will output True (1) if that key is pressed. For example, getKey 105. See here for which numbers each key corresponds to.
The image included here shows an example of what I'm trying to create: A menu that you can scroll through and input multiple variables freely before executing a function http://imgur.com/ulthDRV
I'm afraid that's not possible in programs. You can either put in multiple inputs, or you might be interested in looking into making apps instead.
Additionally, is it possible to make this menu dynamically-updating as variables are entered?
If you're talking about the text on top of the screenshot, yes you can; just put a Disp command or something after each line of Input, so that it continuously overwrites the text above with new text after you input a variable.
I know there are a lot of questions about this issue, but I've reached a point where I can't really do anything else but to ask if somebody else has a solution for this issue...
Using the Foursquare api explorer to test out my query I can't seem to obtain an accurate or even good fit for the data I need to obtain.
It is quite simple. I need to obtain the closest venue from a set of coordinates. I don't mind not having results if nothing is found near by.
So, reading the API documentation (https://developer.foursquare.com/docs/venues/venues) I conclude that I need a search and not an explore because I don't want sugestions of recommended venues (and the results when I tested it proved that it wasn't what I was expecting).
So, using search api I want to find places (the place, but places would do...) close to these coordinates
ll=37.424782,-122.162989
considering that I want places close by, I add
radius=51
and I don't really want many results
limit=2
from the documentation I see that radius is
Only valid for requests with intent=browse, or requests with
intent=checkin and categoryId or query
so, I use
intent=browse
which concludes my query to:
venues/search?intent=browse&ll=37.424782,-122.162989&radius=51&limit=2
Query Result:
https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dbrowse%26ll%3D37.424782,-122.162989%26radius%3D51%26limit%3D2
Here we can see that the first result is straight outside of the radius ... distance: 135
the second result however is cool ... distance: 50
What am I doing wrong to get these results? If I increase the limit all I get is more results that are also outside the radius, I could iterate through them and find the one with the smallest distance... but I have no guarantee that the closest result will be on the top X that I limit, even If I had that guarantee, it would be a tiresome solution to an apparently simple question...
Thanks for the help...
Marc
EDIT:
I managed to make have the query perform as I intended ... But I had to add all of the parent categories from:
https://developer.foursquare.com/categorytree
categoryId=
4d4b7104d754a06370d81259, Arts & Entertainment
4d4b7105d754a06372d81259, College & University
4d4b7105d754a06373d81259, Event
4d4b7105d754a06374d81259, Food
4d4b7105d754a06376d81259, Nightlife Spot
4d4b7105d754a06377d81259, Outdoors & Recreation
4d4b7105d754a06375d81259, Professional & Other Places
4e67e38e036454776db1fb3a, Residence
4d4b7105d754a06378d81259, Shop & Service
4d4b7105d754a06379d81259 Travel & Transport
making my query into:
venues/search?
intent=checkin&ll=37.424782,-122.162989&radius=60&categoryId=4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
Query Result:
https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dcheckin%26ll%3D37.424782,-122.162989%26radius%3D60%26categoryId%3D4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
It still has results outside of my radius still ... but it's an acceptable error margin ... it is weird however.
I managed to make have the query perform as I intended ... But I had to add all of the parent categories from:
https://developer.foursquare.com/categorytree
categoryId=
4d4b7104d754a06370d81259, Arts & Entertainment
4d4b7105d754a06372d81259, College & University
4d4b7105d754a06373d81259, Event
4d4b7105d754a06374d81259, Food
4d4b7105d754a06376d81259, Nightlife Spot
4d4b7105d754a06377d81259, Outdoors & Recreation
4d4b7105d754a06375d81259, Professional & Other Places
4e67e38e036454776db1fb3a, Residence
4d4b7105d754a06378d81259, Shop & Service
4d4b7105d754a06379d81259 Travel & Transport
making my query into: venues/search?
intent=checkin&ll=37.424782,-122.162989&radius=60&categoryId=4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
Query Result: https://developer.foursquare.com/docs/explore#req=venues/search%3Fintent%3Dcheckin%26ll%3D37.424782,-122.162989%26radius%3D60%26categoryId%3D4d4b7104d754a06370d81259,4d4b7105d754a06372d81259,4d4b7105d754a06373d81259,4d4b7105d754a06374d81259,4d4b7105d754a06376d81259,4d4b7105d754a06377d81259,4d4b7105d754a06375d81259,4e67e38e036454776db1fb3a,4d4b7105d754a06378d81259,4d4b7105d754a06379d81259
It still has results outside of my radius still ... but it's an acceptable error margin ... it is weird however.
Although this question is old I'm responding for others. I was working on something similar to this recently and what I learned was that in order to use radius you also need to use the 'query' parameter. What I did was to use the star character '*' and it worked for me. I have to say though that the limit of 50 is something I haven't solved yet which I'm working on at the moment.
I'm working on supporting of the TCL (thermal control protocol, stupid name, its a printer protocol of futurelogic) but i cannot find resources about this protocol, how it is, how it works, nothing, on theirs site i only found this mention http://www.futurelogic-inc.com/trademarks.aspx
any one had worked with it? does any one knows where can i find the data sheet?
The protocol is documented on their website http://www.futurelogic-inc.com/support/downloads/
If you are targetting the PSA66ST model it supports a number of protocols TCL, which is quite nice for delivering templated tickets and, line printing using the Epson ESC/P protocol.
This is all explained in the protocol document.
Oops, these links are incorrect and only correspond to marketing brochures. You will need to contact Futurelogic for the protocol documents. Probably also need to sign an NDA. Anyway, the information may guide you some more.
From what I can gather, it seems the FutureLogic thermal printers do not support general printing, but only printing using predefined templates stored in the printer's firmware. The basic command structure is a caret ^ followed by a one or two character command code, with arguments delimited using a pipe |, and the command ended with another caret ^. I've been able to reverse-engineer a few commands:
^S^ - Printer status
^Se^ - Extended printer status
^C|x|^ - Clear. Known arguments:
a - all
j - jam
^P|x|y0|...|yn|^ - Print fields y0 through yn using template x.
Data areas are defined in the firmware using a similar command format, command ^D|x|y0|...|yn|^, and templates are defined from data areas using command ^T|z|x0|...|xn|^.