Getting bash script to update parent shell's Environment - linux

I am attempting to write a bash command line tool that is usable immediately after installation, i.e. in the same shell as its installation script was called. Lets say install-script.sh (designed for Ubuntu) looks like:
# Get the script's absolute path:
pushd `dirname $0` > /dev/null
SCRIPTPATH=`pwd`
popd > /dev/null
# Add lines to bash.bashrc to export the environment variable:
echo "SCRIPT_HOME=${SCRIPTPATH}" >> /etc/bash.bashrc
echo "export SCRIPT_HOME" >> /etc/bash.bashrc
# Create a new command:
cp ${SCRIPTPATH}/newcomm /usr/bin
chmod a+x /usr/bin/newcomm
The idea is that the new command newcomm uses the SCRIPT_HOME environment variable to reference the main script - which is also in SCRIPTPATH:
exec "${SCRIPT_HOME}/main-script.sh"
Now, the updated bash.bashrc hasn't been loaded into the parent shell yet. Worse, I cannot source it from within the script - which is running in a child shell. Using export to change SCRIPT_HOME in the parent shell would at best be duct-taping the issue, but even this is impossible. Also note that the installation script needs to be run using sudo so it cannot be called from the parent shell using source.
It should be possible since package managers like apt do it. Is there a robust way to patch up my approach? How is this usually done, and is there a good guide to writing bash installers?


You can't. Neither can apt.
A package manager will instead just write required data/variables to a file, which are read either by the program itself, by a patch to the program, or by a wrapper.
Good examples can be found in /etc/default/*. These are files with variable definitions, and some even helpfully describe where they're sourced from:
$ cat /etc/default/ssh
# Default settings for openssh-server. This file is sourced by /bin/sh from
# /etc/init.d/ssh.
# Options to pass to sshd
SSHD_OPTS=
You'll notice that none of the options are set in your current shell after installing a package, since programs get them straight from the files in one way or another.


The only way to modify the current shell is to source a script. That's unavoidable, so start there. Write a script that is sourced. That script will in turn call your current script.
Your current script will need to communicate with the sourced one to tell it what to change. A common way is to echo variable assignments that can be directly executed by the caller. For instance:
printf 'export SCRIPT_HOME=%q\n' "$SCRIPTPATH"
Using printf with %q ensures any special characters will be escaped properly.
Then have the sourced script eval the inner script.
eval "$(sudo install-script.sh)"
If you want to hide the sourceing of the top script you could hide it behind an alias or shell function.

Related

Running `cd` in `.sh` file in anaconda environment on Linux [duplicate]

I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?

Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"

You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.

The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.

The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)

To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.

You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.

Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work

Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL

I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$

simply run:
cd /home/xxx/yyy && command_you_want

When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.

You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)

On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!

It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.

You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.

You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.

to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html

In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.

You can use the operator && :
cd myDirectory && ls

While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.

You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile

This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)

I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.

As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}

If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).

You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.

Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)

It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.

I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set

This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.

how do you change into another directory in a shell script [duplicate]

I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?

Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"

You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.

The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.

The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)

To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.

You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.

Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work

Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL

I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$

simply run:
cd /home/xxx/yyy && command_you_want

When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.

You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)

On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!

It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.

You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.

You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.

to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html

In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.

You can use the operator && :
cd myDirectory && ls

While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.

You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile

This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)

I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.

As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}

If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).

You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.

Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)

It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.

I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set

This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.

Bash Script To Add A Folder/Directory to the path in linux not working [duplicate]

This question already has an answer here:
Unable to export the variable through script file [duplicate]
(1 answer)
Closed 6 years ago.
I created a bash script to add
/My_Scripts/Bash_Scripts
to the default PATH of linux.
!/bin/bash
#This Script is used to add a folder/diectory to the PATH..
echo -e "\e[92m\e[1mCREATING PATH...........\n\n"
cd
mkdir My_Scripts
cd My_Scripts
mkdir Bash_Scripts
cd
export PATH=$PATH:$HOME/My_Scripts/Bash_Scripts
echo -e "\e[92m\e[1mPATH CREATON SUCCESSFUL\n \e[39m"
echo $PATH
The output of script is
root#kali:~/Desktop# bash add_path
CREATING PATH...........
PATH CREATON SUCCESSFUL
`/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/root/My_Scripts/Bash_Scripts'
but if I type echo $PATH in the terminal outside, the path is not added
root#kali:~/Desktop# $PATH
bash: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin: No such file or directory

You are starting up a new bash process and PATH is only modified in the context of the new process. When this process quits, changes done in its environment do not propagate to the parent process.
Instead, you would want to modify PATH in the context of current bash process. If you want this temporarily, you may source your script. source will run in the context of the current bash process. Beware of any side effects - like cd will change the directory, exit will terminate the current bash process.
If you want this change permanently for all future interactive sessions, you can modify ~/.bashrc.
Also, the syntax of shebang is #!/path/to/program, you are missing a #.

Your changes is affected in current shell only.Put the entry in .bashrc file. It will affect the all the terminal.open the .bashrc file and add the below line and run the file -
vim ~/.bashrc
export PATH="$PATH:/home/username"
~/.bashrc
Edit the parent shell
script.sh
#!/bin/bash
export "PATH=$PATH:$HOME/My_Scripts/Bash_Scripts"
echo $PATH
$~ PATH=$(./script.sh)
$~ echo $PATH
/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/loganaayahee/My_Scripts/Bash_Scripts

First thing - you should use echo $PATH. By simply typing $PATH you're trying to execute the command, hence the "No such file or directory error"
Next - the /root/My_Scripts/Bash_Scripts wasn't really added to the PATH. The first output you see in done inside the script, so the changes could be seen there.
The reason is that PATH will be set only in the context of the script shell, execute it as source add_path to preserve the changes in variables (but only for current shell).
If you want the variable to be persistant in all shells - add it to /.bashrc (since you're runnung as root).

Bash decorating "cd" - change directory inside a script [duplicate]

I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?

Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"

You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.

The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.

The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)

To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.

You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.

Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work

Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL

I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$

simply run:
cd /home/xxx/yyy && command_you_want

When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.

You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)

On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!

It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.

You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.

You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.

to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html

In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.

You can use the operator && :
cd myDirectory && ls

While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.

You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile

This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)

I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.

As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}

If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).

You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.

Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)

It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.

I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set

This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.

Setting Enviroment Variables Dynamically on Linux

I am currently looking for a way to set enviroment variables in Linux via a simple shell script. Within the script I am currently using the 'export' command, however this only has scope within the script where system-wide scope is needed.
Is there anyway I can do this via a shell script, or will another method need to be used?

When you run a shell script, it executes in a sub-shell. What you need is to execute it in the context of the current shell, by sourcing it with:
source myshell.sh
or:
. myshell.sh
The latter is my preferred approach since I'm inherently lazy.
If you're talking about system-wide scope inasmuch as you want to affect everybody, you'll need to put your commands in a place where they're sourced at login time (or shell creation time), /etc/profile for example. Where you put your commands depends on the shell being used.
You can find out what scripts get executed by examining the man page for your shell:
man bash
The bash shell, when invoked as a login shell (including as a non-login shell but with the --login parameter), will use /etc/profile and the first of ~/.bash_profile, ~/.bash_login or ~/.profile.
Non-login bash shells will use. unless invoked with --norc or --rcfile <filename>, the files /etc/bash.bashrc and ~/.bashrc.
I'm pretty certain it's even more convoluted than that depending on how the shell is run, but that's as far as my memory stretches. The man page should detail it all.

You could have your script check for the existence of something like /var/myprog/env-vars-to-load and 'source' it then unlink it if it exists, perhaps using trap and a signal. Its hard to say, I'm not familiar with your program.
There is no way to 'inject' environmental variables into another process' address space, so you'll have to find some method of IPC which will can instruct the process on what to set.

A fundamental aspect of environment variables is that you cannot affect the environment for any process but your own and child processes that you spawn. You can't create a script that sets "system wide" environment variables that somehow become usable by other processes.

On the shell prompt:
$ source script.sh
And set the env vars in script.sh

test.sh
#!/bin/bash
echo "export MY_VAR=STACK_OVERFLOW" >> $HOME/.bashrc
. $HOME/.bashrc
sh task.sh
task.sh
#!/bin/sh
echo $MY_VAR
Add executable rights:
chmod +x test.sh task.sh
And lauch test.sh
./test.sh
Result:
STACK_OVERFLOW

Resources