I am trying to get a shell inside the Docker container moul/phoronix-test-suite on Docker Hub using this command
docker run -t -i moul/phoronix-test-suite /bin/bash
but just after executing the command (binary file), the container stops and I get no shell into it.
[slazer#localhost ~]$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
0993189463e6 moul/phoronix-test-suite "phoronix-test-suite " 7 seconds ago Exited (0) 3 seconds ago kickass_shockley
It is a ubuntu:trusty container. How can I get a shell into it, so that I can send arguments to the command phoronix-test-suite?
docker run -t -i moul/phoronix-test-suite /bin/bash will not give you a bash (contrary to docker run -it fedora bash)
According to its Dockerfile, what it will do is execute
phoronix-test-suite /bin/bash
Meaning, it will pass /bin/bash as parameter to phoronix-test-suite, which will exit immediately. That leaves you no time to execute a docker exec -it <container> bash in order to open a bash in an active container session.
Have you tried restarting your docker? It might need to restart or even reboot the host.
Related
completely new to the shell script. I want to run the sql image (image is just there to take a db dump) and take a dump of the db and copy file to the host using shell script.
how i do manually is
1) docker run -it <image_name> bash (this takes in image bash)
2) mysqldump -h <ip> -u <user> -p db > filename.sql
3) docker cp <containerId>:/file/path/within/container /host/path/target (running this in host machine)
doing this i get the dump from container to host manually.
but while making shell script, i am having problem with the point 1) docker run -it <image_name> bash (this takes in image bash) since this takes me to the bash and i have to manually type the command.
how can i do it in the shell script.
any help will be greatly appreciated!
If I understand this correctly, you don't want to type those command manually and instead shell script should execute your command as and when you container is up and running. Now if you can modify sql related Dockerfile and can re-create image then use ENTRYPOINT [and if needed CMD] to execute shell script at startup. Check this link for details on ENTRYPOINT shell script.
Else, if you cannot recreate image then check this post i.e. how to run bash script from run command.
NOTE in both these cases you will have to mount your directory/volume and your sqldump command should copy dump this map volume/directory
You can pass the command to Bash as a parameter:
docker run -it <image_name> --name sqldump bash -c "mysqldump -h <ip> -u <user> -p db > /tmp/filename.sql"
docker cp sqldump:/tmp/filename.sql /path/on/host/filename.sql
Ignore the Docker steps, and just run mysqldump on your host. The -h option is the IP address or DNS name of the host running the database (can be 127.0.0.1 if the container is running on the same host, but not localhost because MySQL misinterprets that); if you mapped the database external port to a non-default port, you also need a -P (capital P) option to specify that port.
For example, if you started the container with
docker run -p 5433:5432 ... mysql:8
then you can take the dump from the host with
mysqldump -h 127.0.0.1 -P 5433 -p db > dump.sql
and not worry about the Docker details at all.
I'm running docker following this procedure:
$ sudo service docker start
$ docker pull epgg/eg
$ docker run -p 8081:80 --name eg -it epgg/eg bash
root#35f54d7d290f:~#
Notice at the last step it creates a root prompt root#35f54d7d290f:~#.
When I do
root#35f54d7d290f:~# exit
exit
The docker process end and the Apache inside the container is dead.
How can I exit the container safely, and how can I re-enter the docker
container prompt back.
When you run following command it performs 2 operations.
$ docker run -p 8081:80 --name eg -it epgg/eg bash
It creates a container named eg
It has only one purpose/process bash that you have overridden using cmd parameter.
That means when bash shell is over/complete/exit container has no objective to run & hence your docker container will also entered into stopped stage.
Ideally you should create a container to run apache-server as the main process (either by default entry-point or cmd).
$ docker run -p 8081:80 --name eg -d epgg/eg
And then using following command you can enter inside the running container.
$ docker exec -it eg bash
here name of your container is eg
(Note since you already have a container named "eg" you may want to remove it first)
$ docker rm -f eg
Since the purpose of any container is to launch/run any process/processes, the container stops/exits when that process is finished. So to keep running the container in the background, it must have an active process inside it.
You can use -d shorthand while running the container to detach
the container from the terminal like this:
docker run -d -it --name {container_name} {image}:{tag}
But this doesn't guarantee to run any process actively in the
background, so even in this case container will stop when the
process comes to an end.
To run the apache server actively in the background you need to use
-DFOREGROUND flag while starting the container:
/usr/sbin/httpd -DFOREGROUND (for centOS/RHEL)
This will run your apache service in background.
In other cases, to keep your services running in the detached mode
simply pass on the /bin/bash command, this will keep the bash
shell active in the background.
docker run -d -it --name {container_name} {image}:{tag} /bin/bash
Anyway, to come outside the running container without exiting the container and the process, simply press: Ctrl+P+Q.
To attach container again to the terminal use this:
docker attach {container_name}
Like for example if I use command docker run -it alpine /bin/sh
it starts a terminal after which I can install packages and all. Now when I use exit command it goes back to the terminal. (main one)
So how can I access the same container again?
When I run that command again, I get a fresh alpine.
Please help
The container lives as long as the specified run command process is still running. When you specify to run /bin/sh, once you exit, the sh process will die and so will you container.
If you want to keep your container running, you have to keep the process inside running. For your case (I am not sure what you want to acheive, I assume you are just testing), the following will keep it running
docker run -d --name alpine alpine tail -f /dev/null
Then you can sh into the container using
docker exec -it alpine sh
Pull an image
docker image pull alpine
See that image is there
docker image ls OR just docker images
see what is inside the alpine
docker run alpine ls -al
Now your question is how to stay with the shell
docker container run -it alpine /bin/sh
You are inside shell script command line. Some distribution may have bash shell.
docker exec -it 5f4 sh
/ # (<-- you can run linux command here!)
At this point, you can use command line of alpine and do
ls -al
type exit to come out-
You can run it in detached mode and it will keep running.
With exec command we can login again
docker container run -it -d alpine /bin/sh
verify that it is UP and copy the FIRST 2 -3 digits of the container ID
docker container ls
login with exec command
docker exec -it <CONTAINER ID or just 2-3 digits> sh
You will need to STOP otherwise it will keep running.
docker stop <CONTAINER ID>
Run Alpine in background
$ docker run --name alpy -dit alpine
$ docker ps
Attach to Alpine
$ docker attach alpy
You should use docker start, which allows you to start a stopped container. If you didn't name your container, you'll need to get it's name/id using docker ps.
For example,
$docker ps
CONTAINER ID IMAGE COMMAND
4c01db0b339c alpine bash
$docker start -i -a 4c01db0b339c
What you should do is below
docker run -d --name myalpine alpine tail -f /dev/null
This would make sure that your container doesn't die. Now whenever you need to install packages inside you just get inside the container using sh
docker exec -it myalpine /bin/sh
If for some reason your container dies, you can still start it again using
docker start myalpine
The following command issued on a Mac terminal is failing the docker command on the remote shell.
However it works if I log in to the server and issue the command there with replacing ";" with "&&"
ssh -i "myKey.pem" user#host ‘docker stop $(docker ps -a -q --filter ancestor=name/kind); docker rm $(docker ps -a -q --filter ancestor=name/kind); docker rmi name/kind; docker build -t name/kind .; sudo docker run -it -d -p 80:80 name/kind’
Cannot connect to the Docker daemon. Is the docker daemon running on this host?
I need to run this command form the local terminal because if is part of bigger command which first build the project locally and scp it to the server.
`$bigger-command && then-the-ssh-as-shown-above.
How do I go about it? Thanks
The best way to pass very complex commands to ssh is the create a script on the server side.
If you need to pass some parameters, proceed this way:
create a .sh file on your localhost
scp it to your remote host
run `ssh user#remotehost 'bash scriptfile.sh'
This should do the trick without giving you headaches about escapement.
I am running Docker (1.10.2) on Windows. I created a script to echo 'Hello World' on my machine and stored it in C:/Users/username/MountTest. I created a new container and mounted this directory (MountTest) as a data volume. The command I ran to do so is shown below:
docker run -t -i --name mounttest -v /c/Users/sarin/MountTest:/home ubuntu /bin/bash
Next, I run the command to execute the script within the container mounttest.
docker exec -it mounttest sh /home/helloworld.sh
The result is as follows:
: not foundworld.sh: 2: /home/helloworld.sh:
Hello World
I get the desired output (echo Hello World) but I want to understand the reason behind the not found errors.
Note: This question might look similar to Run shell script on docker from shared volume, but it addresses permission related issues.
References:
The helloworld.sh file:
#!/bin/sh
echo 'Hello World'
The mounted volumes information is captured below.
Considering the default ENTRYPOINT for the 'ubuntu' image is sh -c, the final command executed on docker exec is:
sh -c 'sh /home/helloworld.sh'
It looks a bit strange and might be the cause of the error message.
Try simply:
docker exec -it mounttest /home/helloworld.sh
# or
docker exec -it mounttest sh -c '/home/helloworld.sh'
Of course, the docker exec should be done in a boot2docker ssh session, simalar to the shell session in which you did a docker run.
Since the docker run opens a bash, you should make a new boot2docker session (docker-machine ssh), and in that new boot2docker shell session, try the docker exec.
Trying docker exec from within the bash made by docker run means trying to do DiD (Docker in Docker). It is not relevant for your test.