prompt = 'Enter ASCII codes';
dlg_title = 'Input';
num_lines = 5;
defaultans = {''};
answer = inputdlg(prompt,dlg_title,num_lines,defaultans);
answer = answer{1};
m2=matrixA.'; result=char(m2(:)).';
result
What Im trying to do is write a script that when i run it, it will convert the matrix of numbers you input into a sentence. What am I doing wrong?
Your input matrix is a string, not numeric. Change line 7 to:
answer = str2num(answer{1});
But since you never assign anything to matrixA, you might as well change it to this:
matrixA = str2num(answer{1});
Related
I'm creating simple multiplication program and i stuck at empty and non integer input
I tried while loop in loop and if/else but because the input is coming first it shows the error and breaks the program
while g < 20 :
variable_1 = random.randint (0,20)
variable_2 = random.randint (0,9)
answer = variable_1 * variable_2
querystr = int(input("str(variable_1)+" x "+str(variable_2)+" = "))
program works fine with multiplication for any integer input if answer is correct or incorrect. problem is that should discard empty input and when entered a letter should be terminate.
Try to first get the data from the user without casting it to an integer, then test the input to decide what to do.
The following example will wait until an input will be entered:
querystr = ''
while not querystr:
querystr = input('What do you have to say?')
Now, if you want to break the loop if a letter is entered (when you expect only integers) you can try something like that:
import string
expected_int = ''
while not expected_int:
try:
expected_int = input('Insert an integer or a letter to exist:')
if no expected_int:
continue
if expected_int in string.ascii_letters:
break
expected_int = int(expected_int)
except:
pass
I'm trying to write a code to print chemical equations in a readable form. I've got all other parts working aside from the subscripts. I know the subscripts will range from 1 to 9, and the hex code is 0x2081 - 0x2089 accordingly.
If the user inputs O_2, it will attach the needed 2 to the hexadecimal to create 0x2082, giving me the subscript 2. However, I can't convert the string '0x2082' into a usable type for chr.
uni = '0x208'
el = input("Enter element (with optional underscore): ")
if ('_' in el):
end = str(el[len(el)-1])
hex_code = uni + end
print(hex_code)
sub = chr(int(hex_code))
Anything to point me in the right direction would be appreciated.
This works:
In [1]: chr(0x2082)
Out[1]: '₂'
So all you need to do is something like this:
text = 'O_2' # take from user input
subzero = 0x2080
subchr = chr(subzero + int(text[-1]))
How can I employ repmat to produce the vector below;
sysHealthy={'sys';'sys';'sys';'sys';'sys'}
I tried:
A=repmat({'sys'},1,5);
unique_cell = {sprintf('%3s;',A{:})};
but it produces the put below:
{'sys;sys;sys;sys;sys;'}
This output has two problems: first, in doesn't have double quotation above each sys and second, it has an ; at the end of the array. I would like to get something like
sysHealthy={'sys';'sys';'sys';'sys';'sys'}.
Try the following lines --
charLength = 3; repCount = 5;
A=repmat('sys',repCount,1); % Creates a column vector
sysHealthy = mat2cell(A, repmat(1, [1,repCount]),charLength); % Convert them into cell.
Very new to matlab and still learning the basics. I'm trying to write a script which calculates the distance between two peaks in a waveform. That part I have managed to do, and I have used xlswrite to put the values I have obtained onto an excel file.
For each file, I have between about 50-250 columns, with just two rows: the second row has the numerical value, and the first has the column headings, copied from original excel files I extracted the data from.
Some of the columns have similar, but not identical, headings, e.g. 'green227RightEyereading3' and 'green227RightEyereading4' etc. Is there a way I can group columns with similar headings, e.g. which have the same number/colour in the heading (I.e.green227) and either 'right eye' or 'left eye', and calculate an average of their numerical values? Link to file here: >https://www.dropbox.com/s/ezpyjr3raol31ts/SampleBatchForTesting.xls?dl=0>
>[Excel_file,PathName] = uigetfile('*.xls', 'Pick a File','C:\Users\User\Documents\Optometry\Year 3\Dissertation\A-scan3');
>[~,name,ext] = fileparts(Excel_file);
>sheet = 2;
>FullXLSfile = [PathName, Excel_file];
>[number_data,txt_data,raw_data] = xlsread(FullXLSfile,sheet);
>HowManyWide = size(txt_data);
>NumberOfTitles = HowManyWide(1,2);
>xlRangeA = txt_data;
>Chickens = {'Test'};
>for f = 1:xlRangeA; %%defined as top line of cells on sheet;
>Text = xlRangeA{f};
>HyphenLocations = find(Text == '-');
>R = HyphenLocations(1,1) -1;
>Chick = Text(1:R);
>Chick = cellstr(Chick);
>B = length(Chick);
>TF = strncmp(Chickens,Chick,B);
>if any(TF == 1); %do nothing
>else
>Chickens = {Chickens;Chick};
>end
>end
Here also is a link to the file that is created when I run my entire script. The values below the headings are the calculated thickesses of the tissue I'm analysing. https://www.dropbox.com/s/4p6iu9kk75ecyzl/Choroid_Thickness.xls?dl=0
Thanks very much
If the different characters are located at the very end (or the very beginning) of the heading, you can go with strncmp buit-in function and compare only part of the string. See more here. But please, provide some code and a part of your excel file. It would help.
Also, if I am not mistaken, you are saving all the data into excel and then re-call it again in order to sort it. Maybe you should consider saving only the final result in excel, it will save you some time, especially if you want to run your script many times.
EDIT:
Here is the code I came up with. It is not the best possible solution for sure, but it works with the file you uploaded. I have omitted the unnecessary lines and variables. The code works only if the numbers of each reading have the same amount of digits. They can be 4 digits as long as every entry has 4 digits. Since in each file you have waves of the same color, the only thing that you care about is whether the reading was recorded with the left or the right eye (correct?). Based on that and the code you wrote, the comparison concerns the part of the string that contains the words "Right" or "Left", i.e. the characters between the hyphens.
[Excel_file,PathName] = uigetfile('*.xls', 'Pick a File',...
'C:\Users\User\Documents\Optometry\Year 3\Dissertation\A-scan3');
sheet = 1;
FullXLSfile = [PathName,Excel_file];
[number_data,txt_data,raw_data] = xlsread(FullXLSfile,sheet);
%% data manipulation
NumberOfTitles = length(txt_data);
TextToCompare = txt_data{1};
r1 = 1; % counter for Readings1 vector
r2 = 1; % counter for Readings2 vector
for ff = 1:NumberOfTitles % in your code xlRangeA is a cell vector not a number!
Text = txt_data{ff};
HyphenLocations = find(Text == '-');
Text = Text(HyphenLocations(1,1):HyphenLocations(1,2)); % take only the part that contains the "eye" information
TextToCompare = TextToCompare(HyphenLocations(1,1):HyphenLocations(1,2)); % same here
if (Text == TextToCompare)
Readings1(r1) = number_data(ff); % store the numerical value in a vector
r1 = r1 + 1; % increase the counter of this vector
else
Readings2(r2) = number_data(ff); % same here
r2 = r2 + 1;
end
TextToCompare = txt_data{1}; % TextToCompare re-initialized for the next comparison
end
mean_readings1 = mean(Readings1); % Find the mean of the grouped values
mean_readings2 = mean(Readings2);
I am positive that this can be done in a more efficient and delicate way. I don't know exactly what kind of calculations you want to do so I only included the mean values as an example. Inside the if statement you can also store the txt_data if you need it. Below I have also included a second way which I find more delicate. Just substitute the %%data manipulation part with the part below if you want to test it:
%% more delicate way
Text_Vector = char(txt_data);
TextToCompare2 = txt_data{1};
HyphenLocations2 = find(TextToCompare2 == '-');
TextToCompare2 = TextToCompare2(HyphenLocations2(1,1):HyphenLocations2(1,2));
Text_Vector = Text_Vector(:,HyphenLocations2(1,1):HyphenLocations2(1,2));
Text_Vector = cellstr(Text_Vector);
dummy = strcmpi(Text_Vector,TextToCompare2);
Readings1 = number_data(dummy);
Readings2 = number_data(~dummy);
I hope this helps.
I have a simple question that I need help on. My code,I believe, is almost complete but im having trouble with the a specific line of code.
I have an assignment question (2 parts) that asks me to find whether a protein (string), has the specified motif (substring) at that particular location (location). This is the first part, and the function and code looks like this:
function output = Motif_Match(motif,protein,location)
%This code wil print a '1' if the motif occurs in the protein starting
at the given location, else it wil print a '0'
for k = 1:location %Iterates through specified location
if protein(1, [k, k+1]) == motif; % if the location matches the protein and motif
output = 1;
else
output = 0;
end
end
This part I was able to get correctly, and example of this is as follows:
p = 'MGNAAAAKKGN'
m = 'GN'
Motif_Match(m,p,2)
ans =
1
The second part of the question, which I am stuck on, is to take the motif and protein and return a vector containing the locations at which the motif occurs in the protein. To do this, I am using calls to my previous code and I am not supposed to use any functions that make this easy such as strfind, find, hist, strcmp etc.
My code for this, so far, is:
function output = Motif_Find(motif,protein)
[r,c] = size(protein)
output = zeros(r,c)
for k = 1:c-1
if Motif_Match(motif,protein,k) == 1;
output(k) = protein(k)
else
output = [];
end
end
I belive something is wrong at line 6 of this code. My thinking on this is that I want the output to give me the locations to me and that this code on this line is incorrect, but I can't seem to think of anything else. An example of what should happen is as follows:
p = 'MGNAAAAKKGN';
m = 'GN';
Motif_Find(m,p)
ans =
2 10
So my question is, how can I get my code to give me the locations? I've been stuck on this for quite a while and can't seem to get anywhere with this. Any help will be greatly appreciated!
Thank you all!
you are very close.
output(k) = protein(k)
should be
output(k) = k
This is because we want just the location K of the match. Using protien(k) will gives us the character at position K in the protein string.
Also the very last thing I would do is only return the nonzero elements. The easiest way is to just use the find command with no arguments besides the vector/matrix
so after your loop just do this
output = find(output); %returns only non zero elements
edit
I just noticed another problem output = []; means set output to an empty array. this isn't what you want i think what you meant was output(k) = 0; this is why you weren't getting the result you expected. But REALLY since you already made the whole array zeros, you don't need that at all. all together, the code should look like this. I also replaced your size with length since your proteins are linear sequences, not 2d matricies
function output = Motif_Find(motif,protein)
protein_len = length(protein)
motif_len = length(motif)
output = zeros(1,protein_len)
%notice here I changed this to motif_length. think of it this way, if the
%length is 4, we don't need to search the last 3,2,or 1 protein groups
for k = 1:protein_len-motif_len + 1
if Motif_Match(motif,protein,k) == 1;
output(k) = k;
%we don't really need these lines, since the array already has zeros
%else
% output(k) = 0;
end
end
%returns only nonzero elements
output = find(output);