I am having trouble determining the correct way to calculate a final rank order for four categories. Each of the four metrics make up a higher group. A Top 10 of each category is applied to the respective product to risk analysis.
CURRENT LOGIC - Assignment of 25% max per category.
Columns - Y4
Parts
0.25
25
=IF(L9=1,$Y$4,IF(L9=2,$Y$4*0.9, IF(L9=3,$Y$4*0.8, IF(L9=4,$Y$4*0.7, IF(L9=5,$Y$4*0.6, IF(L9=6,$Y$4*0.5, IF(L9=7,$Y$4*0.4, IF(L9=8,$Y$4*0.3, IF(L9=9,$Y$4*0.2, IF(L9=10,$Y$4*0.1,0))))))))))
DESIRED...
I would like to use a statement to determine three criteria in order to apply a score (1=100, 2=90, 3=80, etc..).
SUM the rank positions of each of the four categories-apply product rank ascending (not including NULL since it's not in the Top 10)
IF a product is identified in more than one metric-apply a significant contribution weight of (*.75),
IF a product has the number 1 rank in any of the four metrics-apply a score of (100).
Data - UPDATED EXAMPLE
(Product) Parts Labor Overhead External Final Score
"XYZ" 3 1 7 7 100
"ABC" NULL 6 NULL 2 100
"LMN" 4 NULL NULL NULL 70
This is way beyond my capability. ANY assistance is appreciated greatly!!!
Jim
I figured this is a good start and I can alter the weight as needed to reflect the reality of the situation.
=AVERAGE(G28:I28)+SUM(G28:I28)*0.25
However, I couldn't figure out how to put a cap on the score of no more than 100 points.
I am still unclear of what exactly you are attempting and if this will work, but how about this simple matrix using an array formula and some conditional formatting.
Array Formula in F2 (make sure to press Ctrl+Shift+Enter when exiting formula edit mode)
=MIN(100,SUM(IF(B2:E2<>"NULL",CHOOSE(B2:E2,100,90,80,70,60,50,40,30,20,10))))
Conditional Formatting defined as shown below.
Red = 100 value where it comes from a 1
Yellow = 100 value where it comes from more than 1 factor, but without a 1.
Related
I have a range of cells in excel. How to increment numbers when meeting data validation from three different columns?
I tried using formula COUNTIF($A$2:A2,A2) which creates a number sequence. But I have other data to validate from another column for it to return the correct number sequence.
First validation: count the emp no in column range A1:A5 which return a result under Hierarchy column.
Second validation: check the % value under column L as per below level of hierarchy in which the problem comes from.
1 - 0.25
2 - 0.25
3 - 0.5
4 - 0.5
5 - 1
Third validation: check the type of Relation (see Relation column) that needs to check when returning number of sequence too. Below is the Relation Level table.
I don't know on how to join these three conditions for the result to be as below.
My really problem here is on how will i get a sequence number if a person does have 3 children and should be tagged as 2,3,4 (next to spouse which is 1) then the next relation which is parent will be tagged then as next number sequence from the last count of child wherein will be 5 given that as per relation table, Parent level is 3 but it will be adjusted as per count of relations a person has. And for this specific instance, if Parent count will be 5, it still should have 0.5 EE % (see relation table level vs % hierarchy level) even though the count of number is 5. I hope this will make sense. But let me know if you have any questions.
Hope someone could help me on this coz I am not that expert when it comes to excel formula. Thank you!
I want to find the row and column names of the n-th highest values in a 2D array in Excel.
My array has a header row (the Coins) and a header column (the Markets). The data itself displays if a coin is supported on the market and if so what the approximate return of investment (ROI) will be in percent.
Example
An example of the array could look like this:
ROI
Coin A
Coin B
Coin C
Market 1
N/A
7.8%
5.7%
Market 2
0.4%
6.8%
N/A
Market 3
0.45%
7.6%
12.3%
Pay attention: So some values are also set to N/A (or is there a better way to display that a market doesn't support a specific coin? I don't want to enter 0% as it makes it harder to spot is a coin is supported by the market. I also don't want to leave that field blank because then I don't know if I already checked that market for that coin.)
Preferred output
The output for the example table from above with n=3 should then look like this (from high ROI to low):
Coin
Market
ROI
C
3
12.3%
B
1
7.8%
A
3
0.45%
Requirements
Each coin must only be shown once. So, for example, Coin B must not be listed twice in the Top3 output (once for Market 1: 7.8% and once for Market 3: 7.6%)
What I tried
So I thought about how to split up that problem into smaller parts. I think, it will come to these main parts:
find header/row name
here I found something to find the column name for the highest value per row but I wasn't able to adapt it to a working solution for a 2D array
find max in 2D array
here they describe to find the max value in a 2D array but not how to find the n-th highest values
find n-th highest values
here is a good explanation on how to find the highest n values of a 1D array but not how to apply that for a 2D array
only include each coin once
So I really tried to solve this myself but I struggle with adding these different parts together.
I'm trying to sort students based off frequency of participation. I have a table that is automatically generated totaling up how often a student has participated in the last few days.
I want it to do 2 things that I can't figure out.
I want it to ignore students that are at 0 removing them from the resulting rankings.
The first number is most important but I want it to reference the next value in the result of a tie.
Short example of table:
Andy - 1 1 2 3
Brad - 0 1 2 3
Cade - 1 2 3 4
Dane - 1 1 1 2
Desired result:
Cade - 1
Andy - 1
Dane - 1
The tie-breaker isn't that important and I figure I can have conditional formatting to remove children at 0, but I still can't seem to figure it out.
The closest formulas I have found in my searching are:
=INDEX($A$10:$A$9,MATCH(ROWS($C$1:C1),$C$1:$C$9,0))
This one doesn't work because it returns #N/A for pretty much all students who are tied.
=IFERROR(INDEX($C$1:$C$9,MATCH(SMALL(NOT($C$1:$C$9="")*IF(ISNUMBER($C$1:$C$9),COUNTIF($C$1:$C$9,"<="&$C$1:$C$9),COUNTIF($C$1:$C$9,"<="&$C$1:$C$9)+SUM(--ISNUMBER($C$1:$C$9))),ROWS($C$1:C1)+SUM(--ISBLANK($C$1:$C$9))),NOT($C$1:$C$9="")*IF(ISNUMBER($C$1:$C$9),COUNTIF($C$1:$C$9,"<="&$C$1:$C$9),COUNTIF($C$1:$C$9,"<="&$C$1:$C$9)+SUM(--ISNUMBER($C$1:$C$9))),0)),"")
I had this formula that can handle ties but it needs to be OFFSET but I don't know how since it is an array formula. Also, with both these formulas it reverses the ranks with the lowest values at the top. If anyone could assist me I would greatly appreciate it. I'm doing this so that I can give all students a chance to participate equally.
Use a helper column. In that column put the following formula:
=IF(B1=0,"n/a",SUMPRODUCT(B1:E1/10^(COLUMN(B1:E1)-MIN(COLUMN(B1:E1)))))
This will return a single number based on the rankings.
Then in your output column use:
=IFERROR(INDEX(A:A,MATCH(LARGE(F:F,ROW(1:1)),F:F,0)),"")
Then a simple VLOOKUP to return the first number:
=IF(I1<>"",VLOOKUP(I1,A:B,2,FALSE),"")
So I have a table that looks like this
Arrival Time Probability
0 .09
1 .17
2 .27
3 .2
4 .15
5 .12
And I want excel to randomly create one of the 6 arrival time values based on the given probabilities using RAND(). Is there any way to do this other than to have nested If loops?
here's what I came up with.
I would add a column C that calculates the cumulative brackets from 0-1 each digit would represent. If you start with zero and use formulas to calculate your brackets, you can change the probability if needed in the future. (formulas in photo below)
For example, arrival time of 0 would be between 0 and .09.
Then you can use use the rand() function in column D to generate your random number between 0 and 1 and add a lookup function in column E, or wherever you like. Screenshots of the data and formulas:
Replace your probabilities with cumulative probabilities (with a preliminary line for 0) and use VLOOKUP, exploiting the fact that VLOOKUP finds the closest match:
I'd like to accomplish the following task. There are three columns of data. Column A represents price, where the sum needs to be kept under $100,000. Column B represents a value. Column C represents a name tied to columns A & B.
Out of >100 rows of data, I need to find the highest 8 values in column B while keeping the sum of the prices in column A under $100,000. And then return the 8 names from column C.
Can this be accomplished?
EDIT:
I attempted the Solver solution w/ no luck. 200 rows looks to be the max w/ Solver, and that is what I'm using now. Here are the steps I've taken:
Create a column called rank RANK(B2,$B$2:$B$200) (used column D -- what is the purpose of this?)
Create a column called flag just put in zeroes (used column E)
Create 3 total cells total_price (=SUM(A2:A200)), total_value (=SUM(B2:B200)) and total_flag (=(E2:E200))
Use solver to minimize total_value (shouldn't this be maximize??)
Add constraints -Total_price<=100000 -Total_flag=8 -Flag cells are binary
Using Simplex LP, it simply changes the flags for the first 8 values. However, the total price for the first 8 values is >$100,000 ($140k). I've tried changing some options in the Solver Parameters as well as using different solving methods to no avail. I'd like to post an image of the parameter settings, but don't have enough "reputation".
EDIT #2:
The first 5 rows looks like this, price goes down to ~$6k at the bottom of the table.
Price Value Name Rank Flag
$22,538 42.81905675 Blow, Joe 1 0
$22,427 37.36240932 Doe, Jane 2 0
$17,158 34.12127693 Hall, Cliff 3 0
$16,625 33.97654031 Povich, John 4 0
$15,631 33.58212402 Cow, Holy 5 0
I'll give you the solver solution as a starting point. It involves the creation of some extra columns and total cells. Note solver is limited in the amount of cells it can handle but will work with 100 anyway.
Create a column called rank RANK(B2,$B$2:$B$100)
Create a column called flag just put in zeroes
Create 3 total cells total_price, total_value and total_flag
Use solver to minimize total_value
Add constraints
-Total_price<=100000
-Total_flag=8
-Flag cells are binary
This will flag the rows you want and you can grab the names however you want.