The code is following:
gnome-terminal -x sh -c "ssh root#ip 'ls'"
And the 'ls' can executed well on the server, but after the execution it will log out the server and I want to stay in the server. So I want to know is there any way to solve this problem
Because you are supplying a command (the 'ls' part of your code) ssh will execute it on the remote server then log out of it, just as you experienced.
It you leave out the command, ssh should stay logged into the server,
gnome-terminal -x sh -c "ssh root#ip"
Related
I wish to run a script on the remote system and then wish to stay there.
Running following script:-
ssh user#remote logs.sh
This do run the script but after that I am back to my host system. i need to stay on remote one. I tried with..
ssh user#remote logs.sh;bash -l
somehow it solves the problem but still not working exactly as a fresh login as the command:-
ssh user#remote
Or it will be better if i could include something in my script that would open the bash terminal in the same directory where the script was running. Please suggest.
Try this:
ssh -t user#remote 'logs.sh; bash -l'
The quotes are needed to pass both commands to ssh. The -t option forces a pseudo-tty allocation.
Discussion
Consider:
ssh user#remote logs.sh;bash -l
When the shell parses this line, it splits it into two commands. The first is:
ssh user#remote logs.sh
This runs logs.sh on the remote machine. The second command is:
bash -l
This opens a login shell on the local machine.
The quotes were added above to prevent the shell from splitting up the commands this way.
I place this ssh call in the following a shell script on our Linux box named "tstz" and then call it with the linux "at" command in order to schedule it for later execution.
tstz script:
#! /bin/ksh
/usr/bin/ssh -tt <remote windows server> pmcmds ${fl} ${wf} < /dev/null >/tmp/test1.log 2>&1
at command syntax:
at -f tstz now + 1 minute
The ssh call executes remote command as expected, but the ssh connection closes immediately before the remote command has completed. I need the connection to stay open until the remote command has completed and then return control to the tstz script with an exit status.
This is the error I get in the /tmp/test1.log:
tcgetattr: Inappropriate ioctl for device
^[[2JConnection to dc01nj2dwifdv02.nj.core.him closed.^M
NOTE: When using the "at" command to schedule tstz, if I don't use -tt, the ssh command will not execute the remoted command "pmcmds ${fl} ${wf}". I believe this is because a terminal is required. I can however run tstz from the Linux command prompt in the foreground without the -tt on the ssh command line and it runs as expected.
Any help would be greately appreciated. Thanks!
As I understand you need to specify a command to execute on the REMOTE machine after successfully connecting to the server, not on LOCAL machine.
I use following command
ssh -i "key.pem" ec2-user#ec2-XX-XX-XX-XX.us-west-2.compute.amazonaws.com -t 'command; bash -l -c "sudo su"'
where you should replace "sudo su" with your own command, I guess with "pmcmds DFD_ETIME wf_TESTa"
So, try to issue, maybe
/usr/bin/ssh -tt <remote windows server> 'command; bash -l -c "pmcmds DFD_ETIME wf_TESTa"'
P.S. I have discovered interesting service on google called "explainshell"
which helped me to understand that "command;" keyword is crucial inside quotes.
I hardly know anything about shell script or terminal commands.
Want to achieve:
Make a shell script, that connects to remote server and after connecting to that server, run some commands on that server.
Is it possible?
I have tried googling, but didn't find something, i am looking for.
You can do this using ssh (secure shell), you can refer this question for answers How to use SSH to run a shell script on a remote machine?
/tmp/sh.sh is shell script on remote server.
#!/bin/bash
ssh "root#server-ip" 'sh -c "( (nohup /tmp/sh.sh) )"'
#use following for suppressing the output from remote server script.
ssh "root#server-ip" 'sh -c "( (nohup /tmp/sh.sh &>/dev/null ) & )"'
I am trying to call an installation of node.js on a remote server running Ubuntu via SSH. Node has been installed via nvm.
SSHing in and calling node works just fine:
user#localmachine:~$ ssh user#remoteserver
(Server welcome text)
user#remoteserver:~$ which node
/home/user/.nvm/v0.10.00/bin/node
However if I combine it into one line:
user#localmachine:~$ ssh user#remoteserver "which ls"
/bin/ls
user#localmachine:~$ ssh user#remoteserver "which node"
No sign of node, so I tried sourcing .bashrc and waiting 10 seconds:
user#localmachine:~$ ssh user#remoteserver "source ~/.bashrc; sleep 10; which node"
Only node seems affected by this. One thing I did notice was that if I ssh in and then check which shell I'm in it says -bash whilst if I ssh direct it gives me /bin/bash. I tried running the commands inside a bash login shell:
user#localmachine:~$ ssh user#remoteserver 'bash --login -c "which node"'
Still nothing.
Basically my question is: Why isn't bash finding my node.js installation when I call it non-interactively from SSH?
Another approach is to run bash in interactive mode with the -i flag:
user#localmachine:~$ ssh user#remoteserver "bash -i -c 'which node'"
/home/user/.nvm/v0.10.00/bin/node
$ ssh user#remoteserver "which node"
When you run ssh and specify a command to be run on the remote system, ssh by default doesn't allocate a PTY (pseudo-TTY) for the session. Not having a TTY causes your remote shell process (ie, bash) to initialize as a non-interactive session instead of an interactive session. This can alter how it interprets your initialization files--.bashrc, .bash_profile, and so on.
The actual problem is probably that the line which adds /home/user/.nvm/v0.10.00/bin to your command PATH isn't executing for non-interactive sessions. There are two ways to resolve this:
Find the command in your initialization file(s) which adds /home/user/.nvm/v0.10.00/bin to your command path, figure out why it's not running for non-interactive sessions, and correct it.
Run ssh with the -t option. This tells it to allocate a PTY for the remote session. Or add the line RequestTTY yes to your .ssh/config file on the local host.
I am using SSH to start a background process on a remote server. This is what I have at the moment:
ssh remote_user#server.com "nohup process &"
This works, in that the process does start. But the SSH session itself does not end until I hit Ctr-C.
When I hit Ctr-C, the remote process continues to run in the background.
I would like to place the ssh command in a script that I can run locally, so I would like the ssh session to exit automatically once the remote process has started.
Is there a way to make this happen?
The "-f" option to ssh tells ssh to run the remote command in the background and to return immediately. E.g.,
ssh -f user#host "echo foo; sleep 5; echo bar"
If you type the above, you will get your shell prompt back immediately, you will then see "foo" output. Five seconds later you will then see "bar" output. In the meantime, you could have been using the shell.
When using nohup, make sure you also redirect stdin, stdout and stderr:
ssh user#server 'DISPLAY=:0 nohup xeyes < /dev/null > std.out 2> std.err &'
In this way you will be completely detached from the remote process. Be carefull with using ssh -f user#host... since that will only put the ssh process in the background on the calling side. You can verify this by running a ps -aux | grep ssh on the calling machine and this will show you that the ssh call is still active, but just put in the background.
In my example above I use DISPLAY=:0 since xeyes is an X11 program and I want it started on the remote machine.
You could use screen to run your process on this screen, detach from screen Ctrl-a :detach and exit your current session without problem. Then you can reconnect to SSH and attach to this screen again to continue with your task or check if is finished.
Or you can send the command to an already running screen. Your local script should look like this:
ssh remote_user#server.com
screen -dmS new_screen sh
screen -S new_screen -p 0 -X stuff $'nohup process \n'
exit
For more info see this tutorial
Well this question is almost 10 years old, but I recently had to launch a very long script (taking several hours to complete) on a remote server and I found a way using the crontab.
If can edit your user's crontab on the remote server, connect with ssh to the server, edit the crontab and add an entry that will start your script the next minute. Let's say it's 15h03. Add this line :
4 15 * * * /path/to/your/script.sh
save your crontab, wait a minute for the script to be launched. Then edit again your crontab to remove this entry.
You can then safely exit ssh, even shut down your computer while the script is running.