I have an application in nodejs, which I am testing against thousands of users. For 1000 users (when server is deployed at local), Jmeter fails for most test cases providing this:
org.apache.http.NoHttpResponseException: The target server failed to respond
at org.apache.http.impl.conn.DefaultHttpResponseParser.parseHead(DefaultHttpResponseParser.java:95)
at org.apache.http.impl.conn.DefaultHttpResponseParser.parseHead(DefaultHttpResponseParser.java:61)
at org.apache.http.impl.io.AbstractMessageParser.parse(AbstractMessageParser.java:254)
at org.apache.http.impl.AbstractHttpClientConnection.receiveResponseHeader(AbstractHttpClientConnection.java:289)
at org.apache.http.impl.conn.DefaultClientConnection.receiveResponseHeader(DefaultClientConnection.java:252)
at org.apache.http.impl.conn.ManagedClientConnectionImpl.receiveResponseHeader(ManagedClientConnectionImpl.java:191)
at org.apache.jmeter.protocol.http.sampler.MeasuringConnectionManager$MeasuredConnection.receiveResponseHeader(MeasuringConnectionManager.java:201)
at org.apache.http.protocol.HttpRequestExecutor.doReceiveResponse(HttpRequestExecutor.java:300)
at org.apache.http.protocol.HttpRequestExecutor.execute(HttpRequestExecutor.java:127)
at org.apache.http.impl.client.DefaultRequestDirector.tryExecute(DefaultRequestDirector.java:715)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:520)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.executeRequest(HTTPHC4Impl.java:517)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.sample(HTTPHC4Impl.java:331)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:74)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1146)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1135)
at org.apache.jmeter.threads.JMeterThread.process_sampler(JMeterThread.java:434)
at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:261)
at java.lang.Thread.run(Thread.java:745)
Sometimes, I get this as well:
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:196)
at java.net.SocketInputStream.read(SocketInputStream.java:122)
at org.apache.http.impl.io.AbstractSessionInputBuffer.fillBuffer(AbstractSessionInputBuffer.java:166)
at org.apache.http.impl.io.SocketInputBuffer.fillBuffer(SocketInputBuffer.java:90)
at org.apache.http.impl.io.AbstractSessionInputBuffer.readLine(AbstractSessionInputBuffer.java:281)
at org.apache.http.impl.conn.DefaultHttpResponseParser.parseHead(DefaultHttpResponseParser.java:92)
at org.apache.http.impl.conn.DefaultHttpResponseParser.parseHead(DefaultHttpResponseParser.java:61)
at org.apache.http.impl.io.AbstractMessageParser.parse(AbstractMessageParser.java:254)
at org.apache.http.impl.AbstractHttpClientConnection.receiveResponseHeader(AbstractHttpClientConnection.java:289)
at org.apache.http.impl.conn.DefaultClientConnection.receiveResponseHeader(DefaultClientConnection.java:252)
at org.apache.http.impl.conn.ManagedClientConnectionImpl.receiveResponseHeader(ManagedClientConnectionImpl.java:191)
at org.apache.jmeter.protocol.http.sampler.MeasuringConnectionManager$MeasuredConnection.receiveResponseHeader(MeasuringConnectionManager.java:201)
at org.apache.http.protocol.HttpRequestExecutor.doReceiveResponse(HttpRequestExecutor.java:300)
at org.apache.http.protocol.HttpRequestExecutor.execute(HttpRequestExecutor.java:127)
at org.apache.http.impl.client.DefaultRequestDirector.tryExecute(DefaultRequestDirector.java:715)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:520)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:906)
at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:805)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.executeRequest(HTTPHC4Impl.java:517)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.sample(HTTPHC4Impl.java:331)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:74)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1146)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1135)
at org.apache.jmeter.threads.JMeterThread.process_sampler(JMeterThread.java:434)
at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:261)
at java.lang.Thread.run(Thread.java:745)
I tried all the steps in this link:
https://wiki.apache.org/jmeter/JMeterSocketClosed
None of them worked. (I am using Jmeter 2.13)
If you are running your app server locally (I assume with moderate level of HW i.e. dual/quad core CPU, 4/8 GB RAM etc.) and running Jmeter instance on same server then you should understand below things,
As a rule of thumb you can assume Jmeter alone (with all tuning settings applied and enough rampup)can create 500-1000 threads with that hw.
You are running your app server on same machine with Jmeter. This means your app server is getting less resources to use. From errors it looks like that target server/app server is unable to handle that load.
This behavior is obvious because of many reasons like insufficient memory, over CPU utilization, IO issues, Jmeter is not coping with server.
What you can do is,
Try to deploy app server on separate machine with equal or better hw.
Follow all Jmeter best practices mentioned in above link.
Run the test and monitor resource utilization on both servers just to correlate the values with results.
Check if your test passes or not. (Even if it doesn't then at least you know that its not because of Jmeter :) and with the help of resource util logs, Jmeter logs you can find out the bottleneck.)
Similar question I found was Why am I receiving Response code: Non HTTP response code: java.net.SocketException?.
when running maximum number of user, i hope you had taken care about various aspects of the run
user ramp up time
proper timers ( decent amount of think time must be provided)
and most of all , the server that is being utilized should have capability to respond
for a given simple server ( which does not support multi-threading), when we send concurrent requests continuously, at a given point of time, we must analyse and conclude a healthy load , at a point when there are more number of requests being sent, the usual behavior is the script would make you run in errors ;)
Please recheck and post additional info.
Related
I have a Node.js (Express.js) server for my React.js website as BFF. I use Node.js for SSR, proxying some request and cache some pages in Redis. In last time I found that my server time to time went down. I suggest an uptime is about 2 days. After restart, all ok, then response time growth from hour to hour. I have resource monitoring at this server, and I see that server don't have problems with RAM or CPU. It used about 30% of RAM and 20% of CPU.
I regret to say it's a big production site and I can't make minimal reproducible example, cause i don't know where is reason of these error :(
Except are memory and CPU leaks, what will be reasons for Node.js server might go went down?
I need at least direction to search.
UPDATE1:
"went down" - its when kubernetes kills container due 3 failed life checks (GET request to a root / of website)
My site don't use any BD connection but call lots of 3rd party API's. About 6 API requests due one GET/ request from browser
UPDATE2:
Thx. To your answers, guys.
To understand what happend inside my GET/ request, i'm add open-telemetry into my server. In longtime and timeout GET/ requests i saw long API requests with very big tcp.connect and tls.connect.
I think it happens due lack of connections or something about that. I think Mostafa Nazari is right.
I create patch and apply them within the next couple of days, and then will say if problem gone
I solve problem.
It really was lack of connections. I add reusing node-fetch connection due keepAlive and a lot of cache for saving connections. And its works.
Thanks for all your answers. They all right, but most helpful thing was added open-telemetry to my server to understand what exactly happens inside request.
For other people with these problems, I'm strongly recommended as first step, add telemetry to your project.
https://opentelemetry.io/
PS: i can't mark two replies as answer. Joe have most detailed and Mostafa Nazari most relevant to my problem. They both may be "best answers".
Tnx for help, guys.
Gradual growth of response time suggest some kind of leak.
If CPU and memory consumption is excluded, another potentially limiting resources include:
File descriptors - when your server forgets to close files. Monitor for number of files in /proc//fd/* to confirm this. See what those files are, find which code misbehaves.
Directory listing - even temporary directory holding a lot of files will take some time to scan, and if your application is not removing some temporary files and lists them - you will be in trouble quickly.
Zombie processes - just monitor total number of processes on the server.
Firewall rules (some docker network magic may in theory cause this on host system) - monitor length of output of "iptables -L" or "iptables-save" or equivalent on modern kernels. Rare condition.
Memory fragmentation - this may happen in languages with garbage collection, but often leaves traces with something like "Can not allocate memory" in logs. Rare condition, hard to fix. Export some health metrics and make your k8s restart your pod preemptively.
Application bugs/implementation problems. This really depends on internal logic - what is going on inside the app. There may be some data structure that gets filled in with data as time goes by in some tricky way, becoming O(N) instead of O(1). Really hard to trace down, unless you have managed to reproduce the condition in lab/test environment.
API calls from frontend shift to shorter, but more CPU-hungry ones. Monitor distribution of API call types over time.
Here are some of the many possibilities of why your server may go down:
Memory leaks The server may eventually fail if a Node.js application is leaking memory, as you stated in your post above. This may occur if the application keeps adding new objects to the memory without appropriately cleaning up.
Unhandled exceptions The server may crash if an exception is thrown in the application code and is not caught. To avoid this from happening, ensure that all exceptions are handled properly.
Third-party libraries If the application uses any third-party libraries, the server may experience problems as a result. Before using them, consider examining their resource usage, versions, or updates.
Network Connection The server's network connection may have issues if the server is sending a lot of queries to third-party APIs or if the connection is unstable. Verify that the server is handling connections, timeouts, and retries appropriately.
Connection to the Database Even though your server doesn't use any BD connections, it's a good idea to look for any stale connections to databases that could be problematic.
High Volumes of Traffic The server may experience performance issues if it is receiving a lot of traffic. Make sure the server is set up appropriately to handle a lot of traffic, making use of load balancing, caching, and other speed enhancement methods. Cloudflare is always a good option ;)
Concurrent Requests Performance problems may arise if the server is managing a lot of concurrent requests. Check to see if the server is set up correctly to handle several requests at once, using tools like a connection pool, a thread pool, or other concurrency management strategies.
(Credit goes to my System Analysis and Design course slides)
With any incoming/outgoing web requests, 2 File Descriptors will be acquired. as there is a limit on number of FDs, OS does not let new Socket to be opened, this situation cause "Timeout Error" on clients. you can easily check number of open FDs by sudo ls -la /proc/_PID_/fd/ | tail -n +4 | wc -l where _PID_ is nodejs PID, if this value is rising, you have connection leak issue.
I guess you need to do the following to prevent Connection Leak:
make sure you are closing outgoing API call Http Connection (it depends on how you are opening them, some libraries manage this and you just need to config them)
cache your outgoing API call (if it is possible) to reduce API call
for your outgoing API call, use Connection pool, this would manage number of open HttpConnection, reuse already-opened connection and ...
review your code, so that you can serve a request faster than now (for example make your API call more parallel instead of await or nested call). anything you do to make your response faster, is good for preventing this situation
I solve problem. It really was lack of connections. I add reusing node-fetch connection due keepAlive and a lot of cache for saving connections. And its works.
Thanks for all your answers. They all right, but most helpful thing was added open-telemetry to my server to understand what exactly happens inside request.
For other people with these problems, I'm strongly recommended as first step, add telemetry to your project.
https://opentelemetry.io/
I am using an IIS web garden for long running requests with 15 worker processes.
With, for example, 3 browsers, typically multiple worker processes are used.
With Apache jMeter, all requests are using the same worker process.
Is there a way to force the use of multiple worker processes?
This may have at least 2 explanations:
You have some hard coded ID or session ID in your test plan. Check for their presence and remove them, add Cookie Manager to your test
You have a load balancer that work in Source IP mode, in this case you need to either change policy to Round Robin or add 2 other machines
If you are using 1 thread with X iterations and expecting different workers then check that:
Cookie Manager is configured this way:
And Thread Group this way (notice "Same User on each iteration is unchecked"):
If issue persists, then please share you plan and check that you don't have somewhere in Header Manager a hardcoded id leading to using 1 worker
Well-behaved JMeter script should produce the same network footprint as the real browser do so if you're observing inconsistencies most probably your JMeter configuration is not matching requests which are being sent by the real browser.
Make sure that your JMeter test is doing what it is supposed to be doing by inspecting requests/responses details using View Results Tree listener
Use a 3rd-party tool like Wireshark or Fiddler to capture the requests originating from browser/JMeter, detect the differences and amend your JMeter configuration to eliminate them
More information: How to make JMeter behave more like a real browser
In the absolute majority of cases JMeter script is not working as expected due to missing or improperly implemented correlation of the dynamic values
I'm relatively new to running production node.js apps and I've recently been having problems with my server timing out.
Basically after a certain amount of usage & time my node.js app stops responding to requests. I don't even see routes being fired on my console anymore - it's like the whole thing just comes to a halt and the HTTP calls from my client (iPhone running AFNetworking) don't reach the server anymore. But if I restart my node.js app server everything starts working again, until things inevitable stop again. The app never crashes, it just stops responding to requests.
I'm not getting any errors, and I've made sure to handle and log all DB connection errors so I'm not sure where to start. I thought it might have something to do with memory leaks so I installed node-memwatch and set up a listener for memory leaks but that doesn't get called before my server stops responding to requests.
Any clue as to what might be happening and how I can solve this problem?
Here's my stack:
Node.js on AWS EC2 Micro Instance (using Express 4.0 + PM2)
Database on AWS RDS volume running MySQL (using node-mysql)
Sessions stored w/ Redis on same EC2 instance as the node.js app
Clients are iPhones accessing the server via AFNetworking
Once again no errors are firing with any of the modules mentioned above.
First of all you need to be a bit more specific about timeouts.
TCP timeouts: TCP divides a message into packets which are sent one by one. The receiver needs to acknowledge having received the packet. If the receiver does not acknowledge having received the package within certain period of time, a TCP retransmission occurs, which is sending the same packet again. If this happens a couple of more times, the sender gives up and kills the connection.
HTTP timeout: An HTTP client like a browser, or your server while acting as a client (e.g: sending requests to other HTTP servers), can set an arbitrary timeout. If a response is not received within that period of time, it will disconnect and call it a timeout.
Now, there are many, many possible causes for this... from more trivial to less trivial:
Wrong Content-Length calculation: If you send a request with a Content-Length: 20 header, that means "I am going to send you 20 bytes". If you send 19, the other end will wait for the remaining 1. If that takes too long... timeout.
Not enough infrastructure: Maybe you should assign more machines to your application. If (total load / # of CPU cores) is over 1, or your memory usage is high, your system may be over capacity. However keep reading...
Silent exception: An error was thrown but not logged anywhere. The request never finished processing, leading to the next item.
Resource leaks: Every request needs to be handled to completion. If you don't do this, the connection will remain open. In addition, the IncomingMesage object (aka: usually called req in express code) will remain referenced by other objects (e.g: express itself). Each one of those objects can use a lot of memory.
Node event loop starvation: I will get to that at the end.
For memory leaks, the symptoms would be:
the node process would be using an increasing amount of memory.
To make things worse, if available memory is low and your server is misconfigured to use swapping, Linux will start moving memory to disk (swapping), which is very I/O and CPU intensive. Servers should not have swapping enabled.
cat /proc/sys/vm/swappiness
will return you the level of swappiness configured in your system (goes from 0 to 100). You can modify it in a persistent way via /etc/sysctl.conf (requires restart) or in a volatile way using: sysctl vm.swappiness=10
Once you've established you have a memory leak, you need to get a core dump and download it for analysis. A way to do that can be found in this other Stackoverflow response: Tools to analyze core dump from Node.js
For connection leaks (you leaked a connection by not handling a request to completion), you would be having an increasing number of established connections to your server. You can check your established connections with netstat -a -p tcp | grep ESTABLISHED | wc -l can be used to count established connections.
Now, the event loop starvation is the worst problem. If you have short lived code node works very well. But if you do CPU intensive stuff and have a function that keeps the CPU busy for an excessive amount of time... like 50 ms (50 ms of solid, blocking, synchronous CPU time, not asynchronous code taking 50 ms), operations being handled by the event loop such as processing HTTP requests start falling behind and eventually timing out.
The way to find a CPU bottleneck is using a performance profiler. nodegrind/qcachegrind are my preferred profiling tools but others prefer flamegraphs and such. However it can be hard to run a profiler in production. Just take a development server and slam it with requests. aka: a load test. There are many tools for this.
Finally, another way to debug the problem is:
env NODE_DEBUG=tls,net node <...arguments for your app>
node has optional debug statements that are enabled through the NODE_DEBUG environment variable. Setting NODE_DEBUG to tls,net will make node emit debugging information for the tls and net modules... so basically everything being sent or received. If there's a timeout you will see where it's coming from.
Source: Experience of maintaining large deployments of node services for years.
In my company we experienced a serious problem today: our production server went down. Most people accessing our software via a browser were unable to get a connection, however people who had already been using the software were able to continue using it. Even our hot standby server was unable to communicate with the production server, which it does using HTTP, not even going out to the broader internet. The whole time the server was accessible via ping and ssh, and in fact was quite underloaded - it's normally running at 5% CPU load and it was even lower at this time. We do almost no disk i/o.
A few days after the problem started we have a new variation: port 443 (HTTPS) is responding but port 80 stopped responding. The server load is very low. Immediately after restarting tomcat, port 80 started responding again.
We're using tomcat7, with maxThreads="200", and using maxConnections=10000. We serve all data out of main memory, so each HTTP request completes very quickly, but we have a large number of users doing very simple interactions (this is high school subject selection). But it seems very unlikely we would have 10,000 users all with their browser open on our page at the same time.
My question has several parts:
Is it likely that the "maxConnections" parameter is the cause of our woes?
Is there any reason not to set "maxConnections" to a ridiculously high value e.g. 100,000? (i.e. what's the cost of doing so?)
Does tomcat output a warning message anywhere once it hits the "maxConnections" message? (We didn't notice anything).
Is it possible there's an OS limit we're hitting? We're using CentOS 6.4 (Linux) and "ulimit -f" says "unlimited". (Do firewalls understand the concept of Tcp/Ip connections? Could there be a limit elsewhere?)
What happens when tomcat hits the "maxConnections" limit? Does it try to close down some inactive connections? If not, why not? I don't like the idea that our server can be held to ransom by people having their browsers on it, sending the keep-alive's to keep the connection open.
But the main question is, "How do we fix our server?"
More info as requested by Stefan and Sharpy:
Our clients communicate directly with this server
TCP connections were in some cases immediately refused and in other cases timed out
The problem is evident even connecting my browser to the server within the network, or with the hot standby server - also in the same network - unable to do database replication messages which normally happens over HTTP
IPTables - yes, IPTables6 - I don't think so. Anyway, there's nothing between my browser and the server when I test after noticing the problem.
More info:
It really looked like we had solved the problem when we realised we were using the default Tomcat7 setting of BIO, which has one thread per connection, and we had maxThreads=200. In fact 'netstat -an' showed about 297 connections, which matches 200 + queue of 100. So we changed this to NIO and restarted tomcat. Unfortunately the same problem occurred the following day. It's possible we misconfigured the server.xml.
The server.xml and extract from catalina.out is available here:
https://www.dropbox.com/sh/sxgd0fbzyvuldy7/AACZWoBKXNKfXjsSmkgkVgW_a?dl=0
More info:
I did a load test. I'm able to create 500 connections from my development laptop, and do an HTTP GET 3 times on each, without any problem. Unless my load test is invalid (the Java class is also in the above link).
It's hard to tell for sure without hands-on debugging but one of the first things I would check would be the file descriptor limit (that's ulimit -n). TCP connections consume file descriptors, and depending on which implementation is in use, nio connections that do polling using SelectableChannel may eat several file descriptors per open socket.
To check if this is the cause:
Find Tomcat PIDs using ps
Check the ulimit the process runs with: cat /proc/<PID>/limits | fgrep 'open files'
Check how many descriptors are actually in use: ls /proc/<PID>/fd | wc -l
If the number of used descriptors is significantly lower than the limit, something else is the cause of your problem. But if it is equal or very close to the limit, it's this limit which is causing issues. In this case you should increase the limit in /etc/security/limits.conf for the user with whose account Tomcat is running and restart the process from a newly opened shell, check using /proc/<PID>/limits if the new limit is actually used, and see if Tomcat's behavior is improved.
While I don't have a direct answer to solve your problem, I'd like to offer my methods to find what's wrong.
Intuitively there are 3 assumptions:
If your clients hold their connections and never release, it is quite possible your server hits the max connection limit even there is no communications.
The non-responding state can also be reached via various ways such as bugs in the server-side code.
The hardware conditions should not be ignored.
To locate the cause of this problem, you'd better try to replay the scenario in a testing environment. Perform more comprehensive tests and record more detailed logs, including but not limited:
Unit tests, esp. logic blocks using transactions, threading and synchronizations.
Stress-oriented tests. Try to simulate all the user behaviors you can come up with and their combinations and test them in a massive batch mode. (ref)
More specified Logging. Trace client behaviors and analysis what happened exactly before the server stopped responding.
Replace a server machine and see if it will still happen.
The short answer:
Use the NIO connector instead of the default BIO connector
Set "maxConnections" to something suitable e.g. 10,000
Encourage users to use HTTPS so that intermediate proxy servers can't turn 100 page requests into 100 tcp connections.
Check for threads hanging due to deadlock problems, e.g. with a stack dump (kill -3)
(If applicable and if you're not already doing this, write your client app to use the one connection for multiple page requests).
The long answer:
We were using the BIO connector instead of NIO connector. The difference between the two is that BIO is "one thread per connection" and NIO is "one thread can service many connections". So increasing "maxConnections" was irrelevant if we didn't also increase "maxThreads", which we didn't, because we didn't understand the BIO/NIO difference.
To change it to NIO, put this in the element in server.xml:
protocol="org.apache.coyote.http11.Http11NioProtocol"
From what I've read, there's no benefit to using BIO so I don't know why it's the default. We were only using it because it was the default and we assumed the default settings were reasonable and we didn't want to become experts in tomcat tuning to the extent that we now have.
HOWEVER: Even after making this change, we had a similar occurrence: on the same day, HTTPS became unresponsive even while HTTP was working, and then a little later the opposite occurred. Which was a bit depressing. We checked in 'catalina.out' that in fact the NIO connector was being used, and it was. So we began a long period of analysing 'netstat' and wireshark. We noticed some periods of high spikes in the number of connections - in one case up to 900 connections when the baseline was around 70. These spikes occurred when we synchronised our databases between the main production server and the "appliances" we install at each customer site (schools). The more we did the synchronisation, the more we caused outages, which caused us to do even more synchronisations in a downward spiral.
What seems to be happening is that the NSW Education Department proxy server splits our database synchronisation traffic into multiple connections so that 1000 page requests become 1000 connections, and furthermore they are not closed properly until the TCP 4 minute timeout. The proxy server was only able to do this because we were using HTTP. The reason they do this is presumably load balancing - they thought by splitting the page requests across their 4 servers, they'd get better load balancing. When we switched to HTTPS, they are unable to do this and are forced to use just one connection. So that particular problem is eliminated - we no longer see a burst in the number of connections.
People have suggested increasing "maxThreads". In fact this would have improved things but this is not the 'proper' solution - we had the default of 200, but at any given time, hardly any of these were doing anything, in fact hardly any of these were even allocated to page requests.
I think you need to debug the application using Apache JMeter for number of connection and use Jconsole or Zabbix to look for heap space or thread dump for tomcat server.
Nio Connector of Apache tomcat can have maximum connections of 10000 but I don't think thats a good idea to provide that much connection to one instance of tomcat better way to do this is to run multiple instance of tomcat.
In my view best way for Production server: To Run Apache http server in front and point your tomcat instance to that http server using AJP connector.
Hope this helps.
Are you absolutely sure you're not hitting the maxThreads limit? Have you tried changing it?
These days browsers limit simultaneous connections to a max of 4 per hostname/ip, so if you have 50 simultaneous browsers, you could easily hit that limit. Although hopefully your webapp responds quickly enough to handle this. Long polling has become popular these days (until websockets are more prevalent), so you may have 200 long polls.
Another cause could be if you use HTTP[S] for app-to-app communication (that is, no browser involved). Sometimes app writers are sloppy and create new connections for performing multiple tasks in parallel, causing TCP and HTTP overhead. Double check that you are not getting an inflood of requests. Log files can usually help you on this, or you can use wireshark to count the number of HTTP requests or HTTP[S] connections. If possible, modify your API to handle multiple API calls in one HTTP request.
Related to the last one, if you have many HTTP/1.1 requests going across one connection, and intermediate proxy may be splitting them into multiple connections for load balancing purposes. Sounds crazy I know, but I've seen it happen.
Lastly, some crawl bots ignore the crawl delay set in robots.txt. Again, log files and/or wireshark can help you determine this.
Overall, run more experiments with more changes. maxThreads, https, etc. before jumping to conclusions with maxConnections.
We're evaluating using the toobusy module https://github.com/lloyd/node-toobusy on an app hosted on Heroku. I am not sure what an appropriate value for maxLag would be for Heroku environment. It seems like it would need a fair amount of playing around and tweaking to tune it? Anyone use this module in production and with what kind of setup (ie. dynos) and with what params?
Thanks!
I recently started running a small auto-complete RESTful service on heroku.
It serves lots of requests for each user (request is sent on each character the user types).
This service is running on two x1 dynos.
I need it to keep responding fast under load, so I'm also using toobusy. At first I've set it to max lag of 10ms but that was an ambitious goal - it denied many requests when I ran a load test.
After some tweaking - I've ended up with max lag of 40ms. It gave me a good balance between the load (amount of requests service needs to handle) and the desired response time (before denying requests).
I'm monitoring my app for denied requests due to load, so I'm able to add more dynos when needed.
I believe you'll have to play with this value and run load tests to get to the right number as it's very specific to the hardware (in your case Heroku) and what your app is doing for each request.