Related
How would I validate that a program exists, in a way that will either return an error and exit, or continue with the script?
It seems like it should be easy, but it's been stumping me.
Answer
POSIX compatible:
command -v <the_command>
Example use:
if ! command -v <the_command> &> /dev/null
then
echo "<the_command> could not be found"
exit
fi
For Bash specific environments:
hash <the_command> # For regular commands. Or...
type <the_command> # To check built-ins and keywords
Explanation
Avoid which. Not only is it an external process you're launching for doing very little (meaning builtins like hash, type or command are way cheaper), you can also rely on the builtins to actually do what you want, while the effects of external commands can easily vary from system to system.
Why care?
Many operating systems have a which that doesn't even set an exit status, meaning the if which foo won't even work there and will always report that foo exists, even if it doesn't (note that some POSIX shells appear to do this for hash too).
Many operating systems make which do custom and evil stuff like change the output or even hook into the package manager.
So, don't use which. Instead use one of these:
command -v foo >/dev/null 2>&1 || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
type foo >/dev/null 2>&1 || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
hash foo 2>/dev/null || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
(Minor side-note: some will suggest 2>&- is the same 2>/dev/null but shorter – this is untrue. 2>&- closes FD 2 which causes an error in the program when it tries to write to stderr, which is very different from successfully writing to it and discarding the output (and dangerous!))
If your hash bang is /bin/sh then you should care about what POSIX says. type and hash's exit codes aren't terribly well defined by POSIX, and hash is seen to exit successfully when the command doesn't exist (haven't seen this with type yet). command's exit status is well defined by POSIX, so that one is probably the safest to use.
If your script uses bash though, POSIX rules don't really matter anymore and both type and hash become perfectly safe to use. type now has a -P to search just the PATH and hash has the side-effect that the command's location will be hashed (for faster lookup next time you use it), which is usually a good thing since you probably check for its existence in order to actually use it.
As a simple example, here's a function that runs gdate if it exists, otherwise date:
gnudate() {
if hash gdate 2>/dev/null; then
gdate "$#"
else
date "$#"
fi
}
Alternative with a complete feature set
You can use scripts-common to reach your need.
To check if something is installed, you can do:
checkBin <the_command> || errorMessage "This tool requires <the_command>. Install it please, and then run this tool again."
The following is a portable way to check whether a command exists in $PATH and is executable:
[ -x "$(command -v foo)" ]
Example:
if ! [ -x "$(command -v git)" ]; then
echo 'Error: git is not installed.' >&2
exit 1
fi
The executable check is needed because bash returns a non-executable file if no executable file with that name is found in $PATH.
Also note that if a non-executable file with the same name as the executable exists earlier in $PATH, dash returns the former, even though the latter would be executed. This is a bug and is in violation of the POSIX standard. [Bug report] [Standard]
Edit: This seems to be fixed as of dash 0.5.11 (Debian 11).
In addition, this will fail if the command you are looking for has been defined as an alias.
I agree with lhunath to discourage use of which, and his solution is perfectly valid for Bash users. However, to be more portable, command -v shall be used instead:
$ command -v foo >/dev/null 2>&1 || { echo "I require foo but it's not installed. Aborting." >&2; exit 1; }
Command command is POSIX compliant. See here for its specification: command - execute a simple command
Note: type is POSIX compliant, but type -P is not.
It depends on whether you want to know whether it exists in one of the directories in the $PATH variable or whether you know the absolute location of it. If you want to know if it is in the $PATH variable, use
if which programname >/dev/null; then
echo exists
else
echo does not exist
fi
otherwise use
if [ -x /path/to/programname ]; then
echo exists
else
echo does not exist
fi
The redirection to /dev/null/ in the first example suppresses the output of the which program.
I have a function defined in my .bashrc that makes this easier.
command_exists () {
type "$1" &> /dev/null ;
}
Here's an example of how it's used (from my .bash_profile.)
if command_exists mvim ; then
export VISUAL="mvim --nofork"
fi
Expanding on #lhunath's and #GregV's answers, here's the code for the people who want to easily put that check inside an if statement:
exists()
{
command -v "$1" >/dev/null 2>&1
}
Here's how to use it:
if exists bash; then
echo 'Bash exists!'
else
echo 'Your system does not have Bash'
fi
Try using:
test -x filename
or
[ -x filename ]
From the Bash manpage under Conditional Expressions:
-x file
True if file exists and is executable.
To use hash, as #lhunath suggests, in a Bash script:
hash foo &> /dev/null
if [ $? -eq 1 ]; then
echo >&2 "foo not found."
fi
This script runs hash and then checks if the exit code of the most recent command, the value stored in $?, is equal to 1. If hash doesn't find foo, the exit code will be 1. If foo is present, the exit code will be 0.
&> /dev/null redirects standard error and standard output from hash so that it doesn't appear onscreen and echo >&2 writes the message to standard error.
Command -v works fine if the POSIX_BUILTINS option is set for the <command> to test for, but it can fail if not. (It has worked for me for years, but I recently ran into one where it didn't work.)
I find the following to be more failproof:
test -x "$(which <command>)"
Since it tests for three things: path, existence and execution permission.
There are a ton of options here, but I was surprised no quick one-liners. This is what I used at the beginning of my scripts:
[[ "$(command -v mvn)" ]] || { echo "mvn is not installed" 1>&2 ; exit 1; }
[[ "$(command -v java)" ]] || { echo "java is not installed" 1>&2 ; exit 1; }
This is based on the selected answer here and another source.
If you check for program existence, you are probably going to run it later anyway. Why not try to run it in the first place?
if foo --version >/dev/null 2>&1; then
echo Found
else
echo Not found
fi
It's a more trustworthy check that the program runs than merely looking at PATH directories and file permissions.
Plus you can get some useful result from your program, such as its version.
Of course the drawbacks are that some programs can be heavy to start and some don't have a --version option to immediately (and successfully) exit.
Check for multiple dependencies and inform status to end users
for cmd in latex pandoc; do
printf '%-10s' "$cmd"
if hash "$cmd" 2>/dev/null; then
echo OK
else
echo missing
fi
done
Sample output:
latex OK
pandoc missing
Adjust the 10 to the maximum command length. It is not automatic, because I don't see a non-verbose POSIX way to do it:
How can I align the columns of a space separated table in Bash?
Check if some apt packages are installed with dpkg -s and install them otherwise.
See: Check if an apt-get package is installed and then install it if it's not on Linux
It was previously mentioned at: How can I check if a program exists from a Bash script?
I never did get the previous answers to work on the box I have access to. For one, type has been installed (doing what more does). So the builtin directive is needed. This command works for me:
if [ `builtin type -p vim` ]; then echo "TRUE"; else echo "FALSE"; fi
I wanted the same question answered but to run within a Makefile.
install:
#if [[ ! -x "$(shell command -v ghead)" ]]; then \
echo 'ghead does not exist. Please install it.'; \
exit -1; \
fi
It could be simpler, just:
#!/usr/bin/env bash
set -x
# if local program 'foo' returns 1 (doesn't exist) then...
if ! type -P foo; then
echo 'crap, no foo'
else
echo 'sweet, we have foo!'
fi
Change foo to vi to get the other condition to fire.
hash foo 2>/dev/null: works with Z shell (Zsh), Bash, Dash and ash.
type -p foo: it appears to work with Z shell, Bash and ash (BusyBox), but not Dash (it interprets -p as an argument).
command -v foo: works with Z shell, Bash, Dash, but not ash (BusyBox) (-ash: command: not found).
Also note that builtin is not available with ash and Dash.
zsh only, but very useful for zsh scripting (e.g. when writing completion scripts):
The zsh/parameter module gives access to, among other things, the internal commands hash table. From man zshmodules:
THE ZSH/PARAMETER MODULE
The zsh/parameter module gives access to some of the internal hash ta‐
bles used by the shell by defining some special parameters.
[...]
commands
This array gives access to the command hash table. The keys are
the names of external commands, the values are the pathnames of
the files that would be executed when the command would be in‐
voked. Setting a key in this array defines a new entry in this
table in the same way as with the hash builtin. Unsetting a key
as in `unset "commands[foo]"' removes the entry for the given
key from the command hash table.
Although it is a loadable module, it seems to be loaded by default, as long as zsh is not used with --emulate.
example:
martin#martin ~ % echo $commands[zsh]
/usr/bin/zsh
To quickly check whether a certain command is available, just check if the key exists in the hash:
if (( ${+commands[zsh]} ))
then
echo "zsh is available"
fi
Note though that the hash will contain any files in $PATH folders, regardless of whether they are executable or not. To be absolutely sure, you have to spend a stat call on that:
if (( ${+commands[zsh]} )) && [[ -x $commands[zsh] ]]
then
echo "zsh is available"
fi
The which command might be useful. man which
It returns 0 if the executable is found and returns 1 if it's not found or not executable:
NAME
which - locate a command
SYNOPSIS
which [-a] filename ...
DESCRIPTION
which returns the pathnames of the files which would
be executed in the current environment, had its
arguments been given as commands in a strictly
POSIX-conformant shell. It does this by searching
the PATH for executable files matching the names
of the arguments.
OPTIONS
-a print all matching pathnames of each argument
EXIT STATUS
0 if all specified commands are
found and executable
1 if one or more specified commands is nonexistent
or not executable
2 if an invalid option is specified
The nice thing about which is that it figures out if the executable is available in the environment that which is run in - it saves a few problems...
Use Bash builtins if you can:
which programname
...
type -P programname
For those interested, none of the methodologies in previous answers work if you wish to detect an installed library. I imagine you are left either with physically checking the path (potentially for header files and such), or something like this (if you are on a Debian-based distribution):
dpkg --status libdb-dev | grep -q not-installed
if [ $? -eq 0 ]; then
apt-get install libdb-dev
fi
As you can see from the above, a "0" answer from the query means the package is not installed. This is a function of "grep" - a "0" means a match was found, a "1" means no match was found.
This will tell according to the location if the program exist or not:
if [ -x /usr/bin/yum ]; then
echo "This is Centos"
fi
I'd say there isn't any portable and 100% reliable way due to dangling aliases. For example:
alias john='ls --color'
alias paul='george -F'
alias george='ls -h'
alias ringo=/
Of course, only the last one is problematic (no offence to Ringo!). But all of them are valid aliases from the point of view of command -v.
In order to reject dangling ones like ringo, we have to parse the output of the shell built-in alias command and recurse into them (command -v isn't a superior to alias here.) There isn't any portable solution for it, and even a Bash-specific solution is rather tedious.
Note that a solution like this will unconditionally reject alias ls='ls -F':
test() { command -v $1 | grep -qv alias }
If you guys/gals can't get the things in answers here to work and are pulling hair out of your back, try to run the same command using bash -c. Just look at this somnambular delirium. This is what really happening when you run $(sub-command):
First. It can give you completely different output.
$ command -v ls
alias ls='ls --color=auto'
$ bash -c "command -v ls"
/bin/ls
Second. It can give you no output at all.
$ command -v nvm
nvm
$ bash -c "command -v nvm"
$ bash -c "nvm --help"
bash: nvm: command not found
#!/bin/bash
a=${apt-cache show program}
if [[ $a == 0 ]]
then
echo "the program doesn't exist"
else
echo "the program exists"
fi
#program is not literal, you can change it to the program's name you want to check
The hash-variant has one pitfall: On the command line you can for example type in
one_folder/process
to have process executed. For this the parent folder of one_folder must be in $PATH. But when you try to hash this command, it will always succeed:
hash one_folder/process; echo $? # will always output '0'
I second the use of "command -v". E.g. like this:
md=$(command -v mkdirhier) ; alias md=${md:=mkdir} # bash
emacs="$(command -v emacs) -nw" || emacs=nano
alias e=$emacs
[[ -z $(command -v jed) ]] && alias jed=$emacs
I had to check if Git was installed as part of deploying our CI server. My final Bash script was as follows (Ubuntu server):
if ! builtin type -p git &>/dev/null; then
sudo apt-get -y install git-core
fi
To mimic Bash's type -P cmd, we can use the POSIX compliant env -i type cmd 1>/dev/null 2>&1.
man env
# "The option '-i' causes env to completely ignore the environment it inherits."
# In other words, there are no aliases or functions to be looked up by the type command.
ls() { echo 'Hello, world!'; }
ls
type ls
env -i type ls
cmd=ls
cmd=lsx
env -i type $cmd 1>/dev/null 2>&1 || { echo "$cmd not found"; exit 1; }
If there isn't any external type command available (as taken for granted here), we can use POSIX compliant env -i sh -c 'type cmd 1>/dev/null 2>&1':
# Portable version of Bash's type -P cmd (without output on stdout)
typep() {
command -p env -i PATH="$PATH" sh -c '
export LC_ALL=C LANG=C
cmd="$1"
cmd="`type "$cmd" 2>/dev/null || { echo "error: command $cmd not found; exiting ..." 1>&2; exit 1; }`"
[ $? != 0 ] && exit 1
case "$cmd" in
*\ /*) exit 0;;
*) printf "%s\n" "error: $cmd" 1>&2; exit 1;;
esac
' _ "$1" || exit 1
}
# Get your standard $PATH value
#PATH="$(command -p getconf PATH)"
typep ls
typep builtin
typep ls-temp
At least on Mac OS X v10.6.8 (Snow Leopard) using Bash 4.2.24(2) command -v ls does not match a moved /bin/ls-temp.
My setup for a Debian server:
I had the problem when multiple packages contained the same name.
For example apache2. So this was my solution:
function _apt_install() {
apt-get install -y $1 > /dev/null
}
function _apt_install_norecommends() {
apt-get install -y --no-install-recommends $1 > /dev/null
}
function _apt_available() {
if [ `apt-cache search $1 | grep -o "$1" | uniq | wc -l` = "1" ]; then
echo "Package is available : $1"
PACKAGE_INSTALL="1"
else
echo "Package $1 is NOT available for install"
echo "We can not continue without this package..."
echo "Exitting now.."
exit 0
fi
}
function _package_install {
_apt_available $1
if [ "${PACKAGE_INSTALL}" = "1" ]; then
if [ "$(dpkg-query -l $1 | tail -n1 | cut -c1-2)" = "ii" ]; then
echo "package is already_installed: $1"
else
echo "installing package : $1, please wait.."
_apt_install $1
sleep 0.5
fi
fi
}
function _package_install_no_recommends {
_apt_available $1
if [ "${PACKAGE_INSTALL}" = "1" ]; then
if [ "$(dpkg-query -l $1 | tail -n1 | cut -c1-2)" = "ii" ]; then
echo "package is already_installed: $1"
else
echo "installing package : $1, please wait.."
_apt_install_norecommends $1
sleep 0.5
fi
fi
}
How do I get the path of the directory in which a Bash script is located, inside that script?
I want to use a Bash script as a launcher for another application. I want to change the working directory to the one where the Bash script is located, so I can operate on the files in that directory, like so:
$ ./application
#!/usr/bin/env bash
SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
is a useful one-liner which will give you the full directory name of the script no matter where it is being called from.
It will work as long as the last component of the path used to find the script is not a symlink (directory links are OK). If you also want to resolve any links to the script itself, you need a multi-line solution:
#!/usr/bin/env bash
SOURCE=${BASH_SOURCE[0]}
while [ -L "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
DIR=$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )
SOURCE=$(readlink "$SOURCE")
[[ $SOURCE != /* ]] && SOURCE=$DIR/$SOURCE # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
done
DIR=$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )
This last one will work with any combination of aliases, source, bash -c, symlinks, etc.
Beware: if you cd to a different directory before running this snippet, the result may be incorrect!
Also, watch out for $CDPATH gotchas, and stderr output side effects if the user has smartly overridden cd to redirect output to stderr instead (including escape sequences, such as when calling update_terminal_cwd >&2 on Mac). Adding >/dev/null 2>&1 at the end of your cd command will take care of both possibilities.
To understand how it works, try running this more verbose form:
#!/usr/bin/env bash
SOURCE=${BASH_SOURCE[0]}
while [ -L "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
TARGET=$(readlink "$SOURCE")
if [[ $TARGET == /* ]]; then
echo "SOURCE '$SOURCE' is an absolute symlink to '$TARGET'"
SOURCE=$TARGET
else
DIR=$( dirname "$SOURCE" )
echo "SOURCE '$SOURCE' is a relative symlink to '$TARGET' (relative to '$DIR')"
SOURCE=$DIR/$TARGET # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
fi
done
echo "SOURCE is '$SOURCE'"
RDIR=$( dirname "$SOURCE" )
DIR=$( cd -P "$( dirname "$SOURCE" )" >/dev/null 2>&1 && pwd )
if [ "$DIR" != "$RDIR" ]; then
echo "DIR '$RDIR' resolves to '$DIR'"
fi
echo "DIR is '$DIR'"
And it will print something like:
SOURCE './scriptdir.sh' is a relative symlink to 'sym2/scriptdir.sh' (relative to '.')
SOURCE is './sym2/scriptdir.sh'
DIR './sym2' resolves to '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
DIR is '/home/ubuntu/dotfiles/fo fo/real/real1/real2'
Use dirname "$0":
#!/usr/bin/env bash
echo "The script you are running has basename $( basename -- "$0"; ), dirname $( dirname -- "$0"; )";
echo "The present working directory is $( pwd; )";
Using pwd alone will not work if you are not running the script from the directory it is contained in.
[matt#server1 ~]$ pwd
/home/matt
[matt#server1 ~]$ ./test2.sh
The script you are running has basename test2.sh, dirname .
The present working directory is /home/matt
[matt#server1 ~]$ cd /tmp
[matt#server1 tmp]$ ~/test2.sh
The script you are running has basename test2.sh, dirname /home/matt
The present working directory is /tmp
The dirname command is the most basic, simply parsing the path up to the filename off of the $0 (script name) variable:
dirname -- "$0";
But, as matt b pointed out, the path returned is different depending on how the script is called. pwd doesn't do the job because that only tells you what the current directory is, not what directory the script resides in. Additionally, if a symbolic link to a script is executed, you're going to get a (probably relative) path to where the link resides, not the actual script.
Some others have mentioned the readlink command, but at its simplest, you can use:
dirname -- "$( readlink -f -- "$0"; )";
readlink will resolve the script path to an absolute path from the root of the filesystem. So, any paths containing single or double dots, tildes and/or symbolic links will be resolved to a full path.
Here's a script demonstrating each of these, whatdir.sh:
#!/usr/bin/env bash
echo "pwd: `pwd`"
echo "\$0: $0"
echo "basename: `basename -- "$0"`"
echo "dirname: `dirname -- "$0"`"
echo "dirname/readlink: $( dirname -- "$( readlink -f -- "$0"; )"; )"
Running this script in my home dir, using a relative path:
>>>$ ./whatdir.sh
pwd: /Users/phatblat
$0: ./whatdir.sh
basename: whatdir.sh
dirname: .
dirname/readlink: /Users/phatblat
Again, but using the full path to the script:
>>>$ /Users/phatblat/whatdir.sh
pwd: /Users/phatblat
$0: /Users/phatblat/whatdir.sh
basename: whatdir.sh
dirname: /Users/phatblat
dirname/readlink: /Users/phatblat
Now changing directories:
>>>$ cd /tmp
>>>$ ~/whatdir.sh
pwd: /tmp
$0: /Users/phatblat/whatdir.sh
basename: whatdir.sh
dirname: /Users/phatblat
dirname/readlink: /Users/phatblat
And finally using a symbolic link to execute the script:
>>>$ ln -s ~/whatdir.sh whatdirlink.sh
>>>$ ./whatdirlink.sh
pwd: /tmp
$0: ./whatdirlink.sh
basename: whatdirlink.sh
dirname: .
dirname/readlink: /Users/phatblat
There is however one case where this doesn't work, when the script is sourced (instead of executed) in bash:
>>>$ cd /tmp
>>>$ . ~/whatdir.sh
pwd: /tmp
$0: bash
basename: bash
dirname: .
dirname/readlink: /tmp
pushd . > '/dev/null';
SCRIPT_PATH="${BASH_SOURCE[0]:-$0}";
while [ -h "$SCRIPT_PATH" ];
do
cd "$( dirname -- "$SCRIPT_PATH"; )";
SCRIPT_PATH="$( readlink -f -- "$SCRIPT_PATH"; )";
done
cd "$( dirname -- "$SCRIPT_PATH"; )" > '/dev/null';
SCRIPT_PATH="$( pwd; )";
popd > '/dev/null';
It works for all versions, including
when called via multiple depth soft link,
when the file it
when script called by command "source" aka . (dot) operator.
when arg $0 is modified from caller.
"./script"
"/full/path/to/script"
"/some/path/../../another/path/script"
"./some/folder/script"
Alternatively, if the Bash script itself is a relative symlink you want to follow it and return the full path of the linked-to script:
pushd . > '/dev/null';
SCRIPT_PATH="${BASH_SOURCE[0]:-$0}";
while [ -h "$SCRIPT_PATH" ];
do
cd "$( dirname -- "$SCRIPT_PATH"; )";
SCRIPT_PATH="$( readlink -f -- "$SCRIPT_PATH"; )";
done
cd "$( dirname -- "$SCRIPT_PATH"; )" > '/dev/null';
SCRIPT_PATH="$( pwd; )";
popd > '/dev/null';
SCRIPT_PATH is given in full path, no matter how it is called.
Just make sure you locate this at start of the script.
You can use $BASH_SOURCE:
#!/usr/bin/env bash
scriptdir="$( dirname -- "$BASH_SOURCE"; )";
Note that you need to use #!/bin/bash and not #!/bin/sh since it's a Bash extension.
Here is an easy-to-remember script:
DIR="$( dirname -- "${BASH_SOURCE[0]}"; )"; # Get the directory name
DIR="$( realpath -e -- "$DIR"; )"; # Resolve its full path if need be
Short answer:
"`dirname -- "$0";`"
or (preferably):
"$( dirname -- "$0"; )"
This should do it:
DIR="$(dirname "$(realpath "$0")")"
This works with symlinks and spaces in path.
Please see the man pages for dirname and realpath.
Please add a comment on how to support MacOS. I'm sorry I can verify it.
pwd can be used to find the current working directory, and dirname to find the directory of a particular file (command that was run, is $0, so dirname $0 should give you the directory of the current script).
However, dirname gives precisely the directory portion of the filename, which more likely than not is going to be relative to the current working directory. If your script needs to change directory for some reason, then the output from dirname becomes meaningless.
I suggest the following:
#!/usr/bin/env bash
reldir="$( dirname -- "$0"; )";
cd "$reldir";
directory="$( pwd; )";
echo "Directory is ${directory}";
This way, you get an absolute, rather than a relative directory.
Since the script will be run in a separate Bash instance, there isn't any need to restore the working directory afterwards, but if you do want to change back in your script for some reason, you can easily assign the value of pwd to a variable before you change directory, for future use.
Although just
cd "$( dirname -- "$0"; )";
solves the specific scenario in the question, I find having the absolute path to more more useful generally.
SCRIPT_DIR=$( cd ${0%/*} && pwd -P )
I don't think this is as easy as others have made it out to be. pwd doesn't work, as the current directory is not necessarily the directory with the script. $0 doesn't always have the information either. Consider the following three ways to invoke a script:
./script
/usr/bin/script
script
In the first and third ways $0 doesn't have the full path information. In the second and third, pwd does not work. The only way to get the directory in the third way would be to run through the path and find the file with the correct match. Basically the code would have to redo what the OS does.
One way to do what you are asking would be to just hardcode the data in the /usr/share directory, and reference it by its full path. Data shoudn't be in the /usr/bin directory anyway, so this is probably the thing to do.
This gets the current working directory on Mac OS X v10.6.6 (Snow Leopard):
DIR=$(cd "$(dirname "$0")"; pwd)
$(dirname "$(readlink -f "$BASH_SOURCE")")
This is Linux specific, but you could use:
SELF=$(readlink /proc/$$/fd/255)
Here is a POSIX compliant one-liner:
SCRIPT_PATH=`dirname "$0"`; SCRIPT_PATH=`eval "cd \"$SCRIPT_PATH\" && pwd"`
# test
echo $SCRIPT_PATH
The shortest and most elegant way to do this is:
#!/bin/bash
DIRECTORY=$(cd `dirname $0` && pwd)
echo $DIRECTORY
This would work on all platforms and is super clean.
More details can be found in "Which directory is that bash script in?".
Summary:
FULL_PATH_TO_SCRIPT="$(realpath "${BASH_SOURCE[-1]}")"
# OR, if you do NOT need it to work for **sourced** scripts too:
# FULL_PATH_TO_SCRIPT="$(realpath "$0")"
# OR, depending on which path you want, in case of nested `source` calls
# FULL_PATH_TO_SCRIPT="$(realpath "${BASH_SOURCE[0]}")"
# OR, add `-s` to NOT expand symlinks in the path:
# FULL_PATH_TO_SCRIPT="$(realpath -s "${BASH_SOURCE[-1]}")"
SCRIPT_DIRECTORY="$(dirname "$FULL_PATH_TO_SCRIPT")"
SCRIPT_FILENAME="$(basename "$FULL_PATH_TO_SCRIPT")"
Details:
How to obtain the full file path, full directory, and base filename of any script being run OR sourced...
...even when the called script is called from within another bash function or script, or when nested sourcing is being used!
For many cases, all you need to acquire is the full path to the script you just called. This can be easily accomplished using realpath. Note that realpath is part of GNU coreutils. If you don't have it already installed (it comes default on Ubuntu), you can install it with sudo apt update && sudo apt install coreutils.
get_script_path.sh (for the latest version of this script, see get_script_path.sh in my eRCaGuy_hello_world repo):
#!/bin/bash
# A. Obtain the full path, and expand (walk down) symbolic links
# A.1. `"$0"` works only if the file is **run**, but NOT if it is **sourced**.
# FULL_PATH_TO_SCRIPT="$(realpath "$0")"
# A.2. `"${BASH_SOURCE[-1]}"` works whether the file is sourced OR run, and even
# if the script is called from within another bash function!
# NB: if `"${BASH_SOURCE[-1]}"` doesn't give you quite what you want, use
# `"${BASH_SOURCE[0]}"` instead in order to get the first element from the array.
FULL_PATH_TO_SCRIPT="$(realpath "${BASH_SOURCE[-1]}")"
# B.1. `"$0"` works only if the file is **run**, but NOT if it is **sourced**.
# FULL_PATH_TO_SCRIPT_KEEP_SYMLINKS="$(realpath -s "$0")"
# B.2. `"${BASH_SOURCE[-1]}"` works whether the file is sourced OR run, and even
# if the script is called from within another bash function!
# NB: if `"${BASH_SOURCE[-1]}"` doesn't give you quite what you want, use
# `"${BASH_SOURCE[0]}"` instead in order to get the first element from the array.
FULL_PATH_TO_SCRIPT_KEEP_SYMLINKS="$(realpath -s "${BASH_SOURCE[-1]}")"
# You can then also get the full path to the directory, and the base
# filename, like this:
SCRIPT_DIRECTORY="$(dirname "$FULL_PATH_TO_SCRIPT")"
SCRIPT_FILENAME="$(basename "$FULL_PATH_TO_SCRIPT")"
# Now print it all out
echo "FULL_PATH_TO_SCRIPT = \"$FULL_PATH_TO_SCRIPT\""
echo "SCRIPT_DIRECTORY = \"$SCRIPT_DIRECTORY\""
echo "SCRIPT_FILENAME = \"$SCRIPT_FILENAME\""
IMPORTANT note on nested source calls: if "${BASH_SOURCE[-1]}" above doesn't give you quite what you want, try using "${BASH_SOURCE[0]}" instead. The first (0) index gives you the first entry in the array, and the last (-1) index gives you the last last entry in the array. Depending on what it is you're after, you may actually want the first entry. I discovered this to be the case when I sourced ~/.bashrc with . ~/.bashrc, which sourced ~/.bash_aliases with . ~/.bash_aliases, and I wanted the realpath (with expanded symlinks) to the ~/.bash_aliases file, NOT to the ~/.bashrc file. Since these are nested source calls, using "${BASH_SOURCE[0]}" gave me what I wanted: the expanded path to ~/.bash_aliases! Using "${BASH_SOURCE[-1]}", however, gave me what I did not want: the expanded path to ~/.bashrc.
Example command and output:
Running the script:
~/GS/dev/eRCaGuy_hello_world/bash$ ./get_script_path.sh
FULL_PATH_TO_SCRIPT = "/home/gabriel/GS/dev/eRCaGuy_hello_world/bash/get_script_path.sh"
SCRIPT_DIRECTORY = "/home/gabriel/GS/dev/eRCaGuy_hello_world/bash"
SCRIPT_FILENAME = "get_script_path.sh"
Sourcing the script with . get_script_path.sh or source get_script_path.sh (the result is the exact same as above because I used "${BASH_SOURCE[-1]}" in the script instead of "$0"):
~/GS/dev/eRCaGuy_hello_world/bash$ . get_script_path.sh
FULL_PATH_TO_SCRIPT = "/home/gabriel/GS/dev/eRCaGuy_hello_world/bash/get_script_path.sh"
SCRIPT_DIRECTORY = "/home/gabriel/GS/dev/eRCaGuy_hello_world/bash"
SCRIPT_FILENAME = "get_script_path.sh"
If you use "$0" in the script instead of "${BASH_SOURCE[-1]}", you'll get the same output as above when running the script, but this undesired output instead when sourcing the script:
~/GS/dev/eRCaGuy_hello_world/bash$ . get_script_path.sh
FULL_PATH_TO_SCRIPT = "/bin/bash"
SCRIPT_DIRECTORY = "/bin"
SCRIPT_FILENAME = "bash"
And, apparently if you use "$BASH_SOURCE" instead of "${BASH_SOURCE[-1]}", it will not work if the script is called from within another bash function. So, using "${BASH_SOURCE[-1]}" is therefore the best way to do it, as it solves both of these problems! See the references below.
Difference between realpath and realpath -s:
Note that realpath also successfully walks down symbolic links to determine and point to their targets rather than pointing to the symbolic link. If you do NOT want this behavior (sometimes I don't), then add -s to the realpath command above, making that line look like this instead:
# Obtain the full path, but do NOT expand (walk down) symbolic links; in
# other words: **keep** the symlinks as part of the path!
FULL_PATH_TO_SCRIPT="$(realpath -s "${BASH_SOURCE[-1]}")"
This way, symbolic links are NOT expanded. Rather, they are left as-is, as symbolic links in the full path.
The code above is now part of my eRCaGuy_hello_world repo in this file here: bash/get_script_path.sh. Reference and run this file for full examples both with and withOUT symlinks in the paths. See the bottom of the file for example output in both cases.
References:
How to retrieve absolute path given relative
taught me about the BASH_SOURCE variable: Unix & Linux: determining path to sourced shell script
taught me that BASH_SOURCE is actually an array, and we want the last element from it for it to work as expected inside a function (hence why I used "${BASH_SOURCE[-1]}" in my code here): Unix & Linux: determining path to sourced shell script
man bash --> search for BASH_SOURCE:
BASH_SOURCE
An array variable whose members are the source filenames where the corresponding shell function names in the FUNCNAME array variable are defined. The shell function ${FUNCNAME[$i]} is defined in the file ${BASH_SOURCE[$i]} and called from ${BASH_SOURCE[$i+1]}.
See also:
[my answer] Unix & Linux: determining path to sourced shell script
#!/bin/sh
PRG="$0"
# need this for relative symlinks
while [ -h "$PRG" ] ; do
PRG=`readlink "$PRG"`
done
scriptdir=`dirname "$PRG"`
Here is the simple, correct way:
actual_path=$(readlink -f "${BASH_SOURCE[0]}")
script_dir=$(dirname "$actual_path")
Explanation:
${BASH_SOURCE[0]} - the full path to the script. The value of this will be correct even when the script is being sourced, e.g. source <(echo 'echo $0') prints bash, while replacing it with ${BASH_SOURCE[0]} will print the full path of the script. (Of course, this assumes you're OK taking a dependency on Bash.)
readlink -f - Recursively resolves any symlinks in the specified path. This is a GNU extension, and not available on (for example) BSD systems. If you're running a Mac, you can use Homebrew to install GNU coreutils and supplant this with greadlink -f.
And of course dirname gets the parent directory of the path.
I tried all of these and none worked. One was very close, but it had a tiny bug that broke it badly; they forgot to wrap the path in quotation marks.
Also a lot of people assume you're running the script from a shell, so they forget when you open a new script it defaults to your home.
Try this directory on for size:
/var/No one/Thought/About Spaces Being/In a Directory/Name/And Here's your file.text
This gets it right regardless how or where you run it:
#!/bin/bash
echo "pwd: `pwd`"
echo "\$0: $0"
echo "basename: `basename "$0"`"
echo "dirname: `dirname "$0"`"
So to make it actually useful, here's how to change to the directory of the running script:
cd "`dirname "$0"`"
This is a slight revision to the solution e-satis and 3bcdnlklvc04a pointed out in their answer:
SCRIPT_DIR=''
pushd "$(dirname "$(readlink -f "$BASH_SOURCE")")" > /dev/null && {
SCRIPT_DIR="$PWD"
popd > /dev/null
}
This should still work in all the cases they listed.
This will prevent popd after a failed pushd. Thanks to konsolebox.
Try using:
real=$(realpath "$(dirname "$0")")
I would use something like this:
# Retrieve the full pathname of the called script
scriptPath=$(which $0)
# Check whether the path is a link or not
if [ -L $scriptPath ]; then
# It is a link then retrieve the target path and get the directory name
sourceDir=$(dirname $(readlink -f $scriptPath))
else
# Otherwise just get the directory name of the script path
sourceDir=$(dirname $scriptPath)
fi
For systems having GNU coreutils readlink (for example, Linux):
$(readlink -f "$(dirname "$0")")
There's no need to use BASH_SOURCE when $0 contains the script filename.
$_ is worth mentioning as an alternative to $0. If you're running a script from Bash, the accepted answer can be shortened to:
DIR="$( dirname "$_" )"
Note that this has to be the first statement in your script.
These are short ways to get script information:
Folders and files:
Script: "/tmp/src dir/test.sh"
Calling folder: "/tmp/src dir/other"
Using these commands:
echo Script-Dir : `dirname "$(realpath $0)"`
echo Script-Dir : $( cd ${0%/*} && pwd -P )
echo Script-Dir : $(dirname "$(readlink -f "$0")")
echo
echo Script-Name : `basename "$(realpath $0)"`
echo Script-Name : `basename $0`
echo
echo Script-Dir-Relative : `dirname "$BASH_SOURCE"`
echo Script-Dir-Relative : `dirname $0`
echo
echo Calling-Dir : `pwd`
And I got this output:
Script-Dir : /tmp/src dir
Script-Dir : /tmp/src dir
Script-Dir : /tmp/src dir
Script-Name : test.sh
Script-Name : test.sh
Script-Dir-Relative : ..
Script-Dir-Relative : ..
Calling-Dir : /tmp/src dir/other
Also see: https://pastebin.com/J8KjxrPF
This works in Bash 3.2:
path="$( dirname "$( which "$0" )" )"
If you have a ~/bin directory in your $PATH, you have A inside this directory. It sources the script ~/bin/lib/B. You know where the included script is relative to the original one, in the lib subdirectory, but not where it is relative to the user's current directory.
This is solved by the following (inside A):
source "$( dirname "$( which "$0" )" )/lib/B"
It doesn't matter where the user is or how he/she calls the script. This will always work.
I've compared many of the answers given, and came up with some more compact solutions. These seem to handle all of the crazy edge cases that arise from your favorite combination of:
Absolute paths or relative paths
File and directory soft links
Invocation as script, bash script, bash -c script, source script, or . script
Spaces, tabs, newlines, Unicode, etc. in directories and/or filename
Filenames beginning with a hyphen
If you're running from Linux, it seems that using the proc handle is the best solution to locate the fully resolved source of the currently running script (in an interactive session, the link points to the respective /dev/pts/X):
resolved="$(readlink /proc/$$/fd/255 && echo X)" && resolved="${resolved%$'\nX'}"
This has a small bit of ugliness to it, but the fix is compact and easy to understand. We aren't using bash primitives only, but I'm okay with that because readlink simplifies the task considerably. The echo X adds an X to the end of the variable string so that any trailing whitespace in the filename doesn't get eaten, and the parameter substitution ${VAR%X} at the end of the line gets rid of the X. Because readlink adds a newline of its own (which would normally be eaten in the command substitution if not for our previous trickery), we have to get rid of that, too. This is most easily accomplished using the $'' quoting scheme, which lets us use escape sequences such as \n to represent newlines (this is also how you can easily make deviously named directories and files).
The above should cover your needs for locating the currently running script on Linux, but if you don't have the proc filesystem at your disposal, or if you're trying to locate the fully resolved path of some other file, then maybe you'll find the below code helpful. It's only a slight modification from the above one-liner. If you're playing around with strange directory/filenames, checking the output with both ls and readlink is informative, as ls will output "simplified" paths, substituting ? for things like newlines.
absolute_path=$(readlink -e -- "${BASH_SOURCE[0]}" && echo x) && absolute_path=${absolute_path%?x}
dir=$(dirname -- "$absolute_path" && echo x) && dir=${dir%?x}
file=$(basename -- "$absolute_path" && echo x) && file=${file%?x}
ls -l -- "$dir/$file"
printf '$absolute_path: "%s"\n' "$absolute_path"
I believe I've got this one. I'm late to the party, but I think some will appreciate it being here if they come across this thread. The comments should explain:
#!/bin/sh # dash bash ksh # !zsh (issues). G. Nixon, 12/2013. Public domain.
## 'linkread' or 'fullpath' or (you choose) is a little tool to recursively
## dereference symbolic links (ala 'readlink') until the originating file
## is found. This is effectively the same function provided in stdlib.h as
## 'realpath' and on the command line in GNU 'readlink -f'.
## Neither of these tools, however, are particularly accessible on the many
## systems that do not have the GNU implementation of readlink, nor ship
## with a system compiler (not to mention the requisite knowledge of C).
## This script is written with portability and (to the extent possible, speed)
## in mind, hence the use of printf for echo and case statements where they
## can be substituded for test, though I've had to scale back a bit on that.
## It is (to the best of my knowledge) written in standard POSIX shell, and
## has been tested with bash-as-bin-sh, dash, and ksh93. zsh seems to have
## issues with it, though I'm not sure why; so probably best to avoid for now.
## Particularly useful (in fact, the reason I wrote this) is the fact that
## it can be used within a shell script to find the path of the script itself.
## (I am sure the shell knows this already; but most likely for the sake of
## security it is not made readily available. The implementation of "$0"
## specificies that the $0 must be the location of **last** symbolic link in
## a chain, or wherever it resides in the path.) This can be used for some
## ...interesting things, like self-duplicating and self-modifiying scripts.
## Currently supported are three errors: whether the file specified exists
## (ala ENOENT), whether its target exists/is accessible; and the special
## case of when a sybolic link references itself "foo -> foo": a common error
## for beginners, since 'ln' does not produce an error if the order of link
## and target are reversed on the command line. (See POSIX signal ELOOP.)
## It would probably be rather simple to write to use this as a basis for
## a pure shell implementation of the 'symlinks' util included with Linux.
## As an aside, the amount of code below **completely** belies the amount
## effort it took to get this right -- but I guess that's coding for you.
##===-------------------------------------------------------------------===##
for argv; do :; done # Last parameter on command line, for options parsing.
## Error messages. Use functions so that we can sub in when the error occurs.
recurses(){ printf "Self-referential:\n\t$argv ->\n\t$argv\n" ;}
dangling(){ printf "Broken symlink:\n\t$argv ->\n\t"$(readlink "$argv")"\n" ;}
errnoent(){ printf "No such file: "$#"\n" ;} # Borrow a horrible signal name.
# Probably best not to install as 'pathfull', if you can avoid it.
pathfull(){ cd "$(dirname "$#")"; link="$(readlink "$(basename "$#")")"
## 'test and 'ls' report different status for bad symlinks, so we use this.
if [ ! -e "$#" ]; then if $(ls -d "$#" 2>/dev/null) 2>/dev/null; then
errnoent 1>&2; exit 1; elif [ ! -e "$#" -a "$link" = "$#" ]; then
recurses 1>&2; exit 1; elif [ ! -e "$#" ] && [ ! -z "$link" ]; then
dangling 1>&2; exit 1; fi
fi
## Not a link, but there might be one in the path, so 'cd' and 'pwd'.
if [ -z "$link" ]; then if [ "$(dirname "$#" | cut -c1)" = '/' ]; then
printf "$#\n"; exit 0; else printf "$(pwd)/$(basename "$#")\n"; fi; exit 0
fi
## Walk the symlinks back to the origin. Calls itself recursivly as needed.
while [ "$link" ]; do
cd "$(dirname "$link")"; newlink="$(readlink "$(basename "$link")")"
case "$newlink" in
"$link") dangling 1>&2 && exit 1 ;;
'') printf "$(pwd)/$(basename "$link")\n"; exit 0 ;;
*) link="$newlink" && pathfull "$link" ;;
esac
done
printf "$(pwd)/$(basename "$newlink")\n"
}
## Demo. Install somewhere deep in the filesystem, then symlink somewhere
## else, symlink again (maybe with a different name) elsewhere, and link
## back into the directory you started in (or something.) The absolute path
## of the script will always be reported in the usage, along with "$0".
if [ -z "$argv" ]; then scriptname="$(pathfull "$0")"
# Yay ANSI l33t codes! Fancy.
printf "\n\033[3mfrom/as: \033[4m$0\033[0m\n\n\033[1mUSAGE:\033[0m "
printf "\033[4m$scriptname\033[24m [ link | file | dir ]\n\n "
printf "Recursive readlink for the authoritative file, symlink after "
printf "symlink.\n\n\n \033[4m$scriptname\033[24m\n\n "
printf " From within an invocation of a script, locate the script's "
printf "own file\n (no matter where it has been linked or "
printf "from where it is being called).\n\n"
else pathfull "$#"
fi
Try the following cross-compatible solution:
CWD="$(cd -P -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd -P)"
As the commands such as realpath or readlink could be not available (depending on the operating system).
Note: In Bash, it's recommended to use ${BASH_SOURCE[0]} instead of $0, otherwise path can break when sourcing the file (source/.).
Alternatively you can try the following function in Bash:
realpath () {
[[ $1 = /* ]] && echo "$1" || echo "$PWD/${1#./}"
}
This function takes one argument. If argument has already absolute path, print it as it is, otherwise print $PWD variable + filename argument (without ./ prefix).
Related:
How can I set the current working directory to the directory of the script in Bash?
Bash script absolute path with OS X
Reliable way for a Bash script to get the full path to itself
How would I validate that a program exists, in a way that will either return an error and exit, or continue with the script?
It seems like it should be easy, but it's been stumping me.
Answer
POSIX compatible:
command -v <the_command>
Example use:
if ! command -v <the_command> &> /dev/null
then
echo "<the_command> could not be found"
exit
fi
For Bash specific environments:
hash <the_command> # For regular commands. Or...
type <the_command> # To check built-ins and keywords
Explanation
Avoid which. Not only is it an external process you're launching for doing very little (meaning builtins like hash, type or command are way cheaper), you can also rely on the builtins to actually do what you want, while the effects of external commands can easily vary from system to system.
Why care?
Many operating systems have a which that doesn't even set an exit status, meaning the if which foo won't even work there and will always report that foo exists, even if it doesn't (note that some POSIX shells appear to do this for hash too).
Many operating systems make which do custom and evil stuff like change the output or even hook into the package manager.
So, don't use which. Instead use one of these:
command -v foo >/dev/null 2>&1 || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
type foo >/dev/null 2>&1 || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
hash foo 2>/dev/null || { echo >&2 "I require foo but it's not installed. Aborting."; exit 1; }
(Minor side-note: some will suggest 2>&- is the same 2>/dev/null but shorter – this is untrue. 2>&- closes FD 2 which causes an error in the program when it tries to write to stderr, which is very different from successfully writing to it and discarding the output (and dangerous!))
If your hash bang is /bin/sh then you should care about what POSIX says. type and hash's exit codes aren't terribly well defined by POSIX, and hash is seen to exit successfully when the command doesn't exist (haven't seen this with type yet). command's exit status is well defined by POSIX, so that one is probably the safest to use.
If your script uses bash though, POSIX rules don't really matter anymore and both type and hash become perfectly safe to use. type now has a -P to search just the PATH and hash has the side-effect that the command's location will be hashed (for faster lookup next time you use it), which is usually a good thing since you probably check for its existence in order to actually use it.
As a simple example, here's a function that runs gdate if it exists, otherwise date:
gnudate() {
if hash gdate 2>/dev/null; then
gdate "$#"
else
date "$#"
fi
}
Alternative with a complete feature set
You can use scripts-common to reach your need.
To check if something is installed, you can do:
checkBin <the_command> || errorMessage "This tool requires <the_command>. Install it please, and then run this tool again."
The following is a portable way to check whether a command exists in $PATH and is executable:
[ -x "$(command -v foo)" ]
Example:
if ! [ -x "$(command -v git)" ]; then
echo 'Error: git is not installed.' >&2
exit 1
fi
The executable check is needed because bash returns a non-executable file if no executable file with that name is found in $PATH.
Also note that if a non-executable file with the same name as the executable exists earlier in $PATH, dash returns the former, even though the latter would be executed. This is a bug and is in violation of the POSIX standard. [Bug report] [Standard]
Edit: This seems to be fixed as of dash 0.5.11 (Debian 11).
In addition, this will fail if the command you are looking for has been defined as an alias.
I agree with lhunath to discourage use of which, and his solution is perfectly valid for Bash users. However, to be more portable, command -v shall be used instead:
$ command -v foo >/dev/null 2>&1 || { echo "I require foo but it's not installed. Aborting." >&2; exit 1; }
Command command is POSIX compliant. See here for its specification: command - execute a simple command
Note: type is POSIX compliant, but type -P is not.
It depends on whether you want to know whether it exists in one of the directories in the $PATH variable or whether you know the absolute location of it. If you want to know if it is in the $PATH variable, use
if which programname >/dev/null; then
echo exists
else
echo does not exist
fi
otherwise use
if [ -x /path/to/programname ]; then
echo exists
else
echo does not exist
fi
The redirection to /dev/null/ in the first example suppresses the output of the which program.
I have a function defined in my .bashrc that makes this easier.
command_exists () {
type "$1" &> /dev/null ;
}
Here's an example of how it's used (from my .bash_profile.)
if command_exists mvim ; then
export VISUAL="mvim --nofork"
fi
Expanding on #lhunath's and #GregV's answers, here's the code for the people who want to easily put that check inside an if statement:
exists()
{
command -v "$1" >/dev/null 2>&1
}
Here's how to use it:
if exists bash; then
echo 'Bash exists!'
else
echo 'Your system does not have Bash'
fi
Try using:
test -x filename
or
[ -x filename ]
From the Bash manpage under Conditional Expressions:
-x file
True if file exists and is executable.
To use hash, as #lhunath suggests, in a Bash script:
hash foo &> /dev/null
if [ $? -eq 1 ]; then
echo >&2 "foo not found."
fi
This script runs hash and then checks if the exit code of the most recent command, the value stored in $?, is equal to 1. If hash doesn't find foo, the exit code will be 1. If foo is present, the exit code will be 0.
&> /dev/null redirects standard error and standard output from hash so that it doesn't appear onscreen and echo >&2 writes the message to standard error.
Command -v works fine if the POSIX_BUILTINS option is set for the <command> to test for, but it can fail if not. (It has worked for me for years, but I recently ran into one where it didn't work.)
I find the following to be more failproof:
test -x "$(which <command>)"
Since it tests for three things: path, existence and execution permission.
There are a ton of options here, but I was surprised no quick one-liners. This is what I used at the beginning of my scripts:
[[ "$(command -v mvn)" ]] || { echo "mvn is not installed" 1>&2 ; exit 1; }
[[ "$(command -v java)" ]] || { echo "java is not installed" 1>&2 ; exit 1; }
This is based on the selected answer here and another source.
If you check for program existence, you are probably going to run it later anyway. Why not try to run it in the first place?
if foo --version >/dev/null 2>&1; then
echo Found
else
echo Not found
fi
It's a more trustworthy check that the program runs than merely looking at PATH directories and file permissions.
Plus you can get some useful result from your program, such as its version.
Of course the drawbacks are that some programs can be heavy to start and some don't have a --version option to immediately (and successfully) exit.
Check for multiple dependencies and inform status to end users
for cmd in latex pandoc; do
printf '%-10s' "$cmd"
if hash "$cmd" 2>/dev/null; then
echo OK
else
echo missing
fi
done
Sample output:
latex OK
pandoc missing
Adjust the 10 to the maximum command length. It is not automatic, because I don't see a non-verbose POSIX way to do it:
How can I align the columns of a space separated table in Bash?
Check if some apt packages are installed with dpkg -s and install them otherwise.
See: Check if an apt-get package is installed and then install it if it's not on Linux
It was previously mentioned at: How can I check if a program exists from a Bash script?
I never did get the previous answers to work on the box I have access to. For one, type has been installed (doing what more does). So the builtin directive is needed. This command works for me:
if [ `builtin type -p vim` ]; then echo "TRUE"; else echo "FALSE"; fi
I wanted the same question answered but to run within a Makefile.
install:
#if [[ ! -x "$(shell command -v ghead)" ]]; then \
echo 'ghead does not exist. Please install it.'; \
exit -1; \
fi
It could be simpler, just:
#!/usr/bin/env bash
set -x
# if local program 'foo' returns 1 (doesn't exist) then...
if ! type -P foo; then
echo 'crap, no foo'
else
echo 'sweet, we have foo!'
fi
Change foo to vi to get the other condition to fire.
hash foo 2>/dev/null: works with Z shell (Zsh), Bash, Dash and ash.
type -p foo: it appears to work with Z shell, Bash and ash (BusyBox), but not Dash (it interprets -p as an argument).
command -v foo: works with Z shell, Bash, Dash, but not ash (BusyBox) (-ash: command: not found).
Also note that builtin is not available with ash and Dash.
zsh only, but very useful for zsh scripting (e.g. when writing completion scripts):
The zsh/parameter module gives access to, among other things, the internal commands hash table. From man zshmodules:
THE ZSH/PARAMETER MODULE
The zsh/parameter module gives access to some of the internal hash ta‐
bles used by the shell by defining some special parameters.
[...]
commands
This array gives access to the command hash table. The keys are
the names of external commands, the values are the pathnames of
the files that would be executed when the command would be in‐
voked. Setting a key in this array defines a new entry in this
table in the same way as with the hash builtin. Unsetting a key
as in `unset "commands[foo]"' removes the entry for the given
key from the command hash table.
Although it is a loadable module, it seems to be loaded by default, as long as zsh is not used with --emulate.
example:
martin#martin ~ % echo $commands[zsh]
/usr/bin/zsh
To quickly check whether a certain command is available, just check if the key exists in the hash:
if (( ${+commands[zsh]} ))
then
echo "zsh is available"
fi
Note though that the hash will contain any files in $PATH folders, regardless of whether they are executable or not. To be absolutely sure, you have to spend a stat call on that:
if (( ${+commands[zsh]} )) && [[ -x $commands[zsh] ]]
then
echo "zsh is available"
fi
The which command might be useful. man which
It returns 0 if the executable is found and returns 1 if it's not found or not executable:
NAME
which - locate a command
SYNOPSIS
which [-a] filename ...
DESCRIPTION
which returns the pathnames of the files which would
be executed in the current environment, had its
arguments been given as commands in a strictly
POSIX-conformant shell. It does this by searching
the PATH for executable files matching the names
of the arguments.
OPTIONS
-a print all matching pathnames of each argument
EXIT STATUS
0 if all specified commands are
found and executable
1 if one or more specified commands is nonexistent
or not executable
2 if an invalid option is specified
The nice thing about which is that it figures out if the executable is available in the environment that which is run in - it saves a few problems...
Use Bash builtins if you can:
which programname
...
type -P programname
For those interested, none of the methodologies in previous answers work if you wish to detect an installed library. I imagine you are left either with physically checking the path (potentially for header files and such), or something like this (if you are on a Debian-based distribution):
dpkg --status libdb-dev | grep -q not-installed
if [ $? -eq 0 ]; then
apt-get install libdb-dev
fi
As you can see from the above, a "0" answer from the query means the package is not installed. This is a function of "grep" - a "0" means a match was found, a "1" means no match was found.
This will tell according to the location if the program exist or not:
if [ -x /usr/bin/yum ]; then
echo "This is Centos"
fi
I'd say there isn't any portable and 100% reliable way due to dangling aliases. For example:
alias john='ls --color'
alias paul='george -F'
alias george='ls -h'
alias ringo=/
Of course, only the last one is problematic (no offence to Ringo!). But all of them are valid aliases from the point of view of command -v.
In order to reject dangling ones like ringo, we have to parse the output of the shell built-in alias command and recurse into them (command -v isn't a superior to alias here.) There isn't any portable solution for it, and even a Bash-specific solution is rather tedious.
Note that a solution like this will unconditionally reject alias ls='ls -F':
test() { command -v $1 | grep -qv alias }
If you guys/gals can't get the things in answers here to work and are pulling hair out of your back, try to run the same command using bash -c. Just look at this somnambular delirium. This is what really happening when you run $(sub-command):
First. It can give you completely different output.
$ command -v ls
alias ls='ls --color=auto'
$ bash -c "command -v ls"
/bin/ls
Second. It can give you no output at all.
$ command -v nvm
nvm
$ bash -c "command -v nvm"
$ bash -c "nvm --help"
bash: nvm: command not found
#!/bin/bash
a=${apt-cache show program}
if [[ $a == 0 ]]
then
echo "the program doesn't exist"
else
echo "the program exists"
fi
#program is not literal, you can change it to the program's name you want to check
The hash-variant has one pitfall: On the command line you can for example type in
one_folder/process
to have process executed. For this the parent folder of one_folder must be in $PATH. But when you try to hash this command, it will always succeed:
hash one_folder/process; echo $? # will always output '0'
I second the use of "command -v". E.g. like this:
md=$(command -v mkdirhier) ; alias md=${md:=mkdir} # bash
emacs="$(command -v emacs) -nw" || emacs=nano
alias e=$emacs
[[ -z $(command -v jed) ]] && alias jed=$emacs
I had to check if Git was installed as part of deploying our CI server. My final Bash script was as follows (Ubuntu server):
if ! builtin type -p git &>/dev/null; then
sudo apt-get -y install git-core
fi
To mimic Bash's type -P cmd, we can use the POSIX compliant env -i type cmd 1>/dev/null 2>&1.
man env
# "The option '-i' causes env to completely ignore the environment it inherits."
# In other words, there are no aliases or functions to be looked up by the type command.
ls() { echo 'Hello, world!'; }
ls
type ls
env -i type ls
cmd=ls
cmd=lsx
env -i type $cmd 1>/dev/null 2>&1 || { echo "$cmd not found"; exit 1; }
If there isn't any external type command available (as taken for granted here), we can use POSIX compliant env -i sh -c 'type cmd 1>/dev/null 2>&1':
# Portable version of Bash's type -P cmd (without output on stdout)
typep() {
command -p env -i PATH="$PATH" sh -c '
export LC_ALL=C LANG=C
cmd="$1"
cmd="`type "$cmd" 2>/dev/null || { echo "error: command $cmd not found; exiting ..." 1>&2; exit 1; }`"
[ $? != 0 ] && exit 1
case "$cmd" in
*\ /*) exit 0;;
*) printf "%s\n" "error: $cmd" 1>&2; exit 1;;
esac
' _ "$1" || exit 1
}
# Get your standard $PATH value
#PATH="$(command -p getconf PATH)"
typep ls
typep builtin
typep ls-temp
At least on Mac OS X v10.6.8 (Snow Leopard) using Bash 4.2.24(2) command -v ls does not match a moved /bin/ls-temp.
My setup for a Debian server:
I had the problem when multiple packages contained the same name.
For example apache2. So this was my solution:
function _apt_install() {
apt-get install -y $1 > /dev/null
}
function _apt_install_norecommends() {
apt-get install -y --no-install-recommends $1 > /dev/null
}
function _apt_available() {
if [ `apt-cache search $1 | grep -o "$1" | uniq | wc -l` = "1" ]; then
echo "Package is available : $1"
PACKAGE_INSTALL="1"
else
echo "Package $1 is NOT available for install"
echo "We can not continue without this package..."
echo "Exitting now.."
exit 0
fi
}
function _package_install {
_apt_available $1
if [ "${PACKAGE_INSTALL}" = "1" ]; then
if [ "$(dpkg-query -l $1 | tail -n1 | cut -c1-2)" = "ii" ]; then
echo "package is already_installed: $1"
else
echo "installing package : $1, please wait.."
_apt_install $1
sleep 0.5
fi
fi
}
function _package_install_no_recommends {
_apt_available $1
if [ "${PACKAGE_INSTALL}" = "1" ]; then
if [ "$(dpkg-query -l $1 | tail -n1 | cut -c1-2)" = "ii" ]; then
echo "package is already_installed: $1"
else
echo "installing package : $1, please wait.."
_apt_install_norecommends $1
sleep 0.5
fi
fi
}
Can anyone tell me why this is always saying that the directory is not writable, when it absolutely is?
$dnam="/home/bryan/renametest/C D"
# Is the directory writable
err=0
if [ ! -w $dnam ]
then
# Not writable. Pop the error and exit.
echo "Directory $dnam is not writable"
err=1
fi
You need double-quotes around $dnam -- without them, it's interpreted as two separate shell words, "/home/bryan/renametest/C" and "D", which makes an invalid test expression and hence fails. This should work:
if [ ! -w "$dnam" ]
#tink's suggestion of [[ ]] is a cleaner way of doing tests like this, but is only available in bash (and some other shells with extended syntax). The fact that you get [[: not found means you're using a fairly basic shell, not bash.
I see multiple problems:
You are using a space inside your variable. This is not illegal, but in combination line you use the variable unescaped and generate the following command:
if [ ! -w /home/bryan/renametest/C D ]
This is not a valid syntax. The simplest way to fix this is changing the line to
if [ ! -w "$dnam" ]
The next problem is worse: On my system, help test returns the text:
-w FILE True if the file is writable by you.
Which means, the command doesn't support directories but only files. If you want to check if a directory is writable, you will have to use a different command
As everyone else said, the $dnam variable needs double quotes. Here's why:
The [ ... ] is an alias to the test command. If you look in your system, you will see a file called /bin/[ or maybe /bin/usr/[. On some systems, this is a hard link to /bin/test or /bin/usr/test. The if statement executes what comes after the if, and if that command returns a zero exit status, the if statement will execute the then clause. Otherwise, if there is an else clause, that will execute instead.
To allow for boolean testing, Unix included the test command, so you could do this:
if test -d "$directory"
then
echo "Directory $directory exists!"
fi
Later on, the /bin/[ was added as syntactic sugar. This is identical to the above:
if [ -d "$directory" ]
then
echo "Directory $directory exists!"
fi
Now, both [ and test are builtin commands, but they are *still commands. This means that the shell interpolates the command and then executes it.
Try executing the following:
$ set -xv # Turns on shell debugging
$ dnam="/home/bryan/renametest/C D"
dnam="/home/bryan/renametest/C D"
+ dnam='/home/bryan/renametest/C D'
$ test -d $dnam
test -d $dnam
+ test -d /home/bryan/renametest/C D
$ echo $?
echo $?
+ echo 1
1
$ test -d "$dnam" # Now with quotes
test -d $dnam
+ test -d "/home/bryan/renametest/C D"
$ echo $?
echo $?
+ echo 0
0
$ set +xv # Turn off the debuggin
Each command is echoed twice. The first time as written, and the second time after the line is interpolated. As part of the interpolation, the shell splits parameters on white space. As you can see, the test command is testing the presence of /home/bryan/renamtest/C which doesn't exist and thus not writable. I'm actually surprised that the test command didn't print an error message because you passed it an extra parameter.
In the second attempt, you added quotes. These quotes prevented the shell from splitting your parameters on the space and keep the directory name as a single parameter.
Since [ ... ] is a command, you have to take into account the shell's interpolation of variables and other issues. And, if you're not absolutely careful, you can end up with errors.
Even worse, sometimes the [ ... ] might work and sometimes it might not. If your directory name didn't contain spaces, it will work as expected. Imagine you're writing a program, and you test it and everything works because all directories you've tried don't have spaces. Then, someone uses your program, but has a space in the directory. A substantial number of shell script bugs are do to this type of issue in if statements.
This is why Bash introduced the [[ ... ]] tests. The [[ isn't a command but a statement. This means that the shell doesn't directly interpolate the results. Instead, the parameters are parsed, and then any interpolation is done. Thus, this would have worked:
dnam="/home/bryan/renametest/C D" # No "$" in front of the variable!
# Is the directory writable
if [[ ! -w $dnam ]] # No quotation marks needed!
then
# Not writable. Pop the error and exit.
echo "Directory $dnam is not writable"
err=1
fi
It's almost always better to use the [[ ... ]] test rather than the [ ... ] test, so go ahead and get into the habit.
One more minor error, you had:
$dnam="/home/bryan/renametest/C D"
This gets interpolated by the shell, so the variable being set is whatever the value of $dnam just happens to be. If $dnam happened to equal "foo", you would been doing this:
foo="/home/bryan/renametest/C D"
Not what you want.
You want to leave the $ off when you set variables:
dnam="/home/bryan/renametest/C D"
I'm converting some Windows batch files to Unix scripts using sh. I have problems because some behavior is dependent on the %~dp0 macro available in batch files.
Is there any sh equivalent to this? Any way to obtain the directory where the executing script lives?
The problem (for you) with $0 is that it is set to whatever command line was use to invoke the script, not the location of the script itself. This can make it difficult to get the full path of the directory containing the script which is what you get from %~dp0 in a Windows batch file.
For example, consider the following script, dollar.sh:
#!/bin/bash
echo $0
If you'd run it you'll get the following output:
# ./dollar.sh
./dollar.sh
# /tmp/dollar.sh
/tmp/dollar.sh
So to get the fully qualified directory name of a script I do the following:
cd `dirname $0`
SCRIPTDIR=`pwd`
cd -
This works as follows:
cd to the directory of the script, using either the relative or absolute path from the command line.
Gets the absolute path of this directory and stores it in SCRIPTDIR.
Goes back to the previous working directory using "cd -".
Yes, you can! It's in the arguments. :)
look at
${0}
combining that with
{$var%Pattern}
Remove from $var the shortest part of $Pattern that matches the back end of $var.
what you want is just
${0%/*}
I recommend the Advanced Bash Scripting Guide
(that is also where the above information is from).
Especiall the part on Converting DOS Batch Files to Shell Scripts
might be useful for you. :)
If I have misunderstood you, you may have to combine that with the output of "pwd". Since it only contains the path the script was called with!
Try the following script:
#!/bin/bash
called_path=${0%/*}
stripped=${called_path#[^/]*}
real_path=`pwd`$stripped
echo "called path: $called_path"
echo "stripped: $stripped"
echo "pwd: `pwd`"
echo "real path: $real_path
This needs some work though.
I recommend using Dave Webb's approach unless that is impossible.
In bash under linux you can get the full path to the command with:
readlink /proc/$$/fd/255
and to get the directory:
dir=$(dirname $(readlink /proc/$$/fd/255))
It's ugly, but I have yet to find another way.
I was trying to find the path for a script that was being sourced from another script. And that was my problem, when sourcing the text just gets copied into the calling script, so $0 always returns information about the calling script.
I found a workaround, that only works in bash, $BASH_SOURCE always has the info about the script in which it is referred to. Even if the script is sourced it is correctly resolved to the original (sourced) script.
The correct answer is this one:
How do I determine the location of my script? I want to read some config files from the same place.
It is important to realize that in the general case, this problem has no solution. Any approach you might have heard of, and any approach that will be detailed below, has flaws and will only work in specific cases. First and foremost, try to avoid the problem entirely by not depending on the location of your script!
Before we dive into solutions, let's clear up some misunderstandings. It is important to understand that:
Your script does not actually have a location! Wherever the bytes end up coming from, there is no "one canonical path" for it. Never.
$0 is NOT the answer to your problem. If you think it is, you can either stop reading and write more bugs, or you can accept this and read on.
...
Try this:
${0%/*}
This should work for bash shell:
dir=$(dirname $(readlink -m $BASH_SOURCE))
Test script:
#!/bin/bash
echo $(dirname $(readlink -m $BASH_SOURCE))
Run test:
$ ./somedir/test.sh
/tmp/somedir
$ source ./somedir/test.sh
/tmp/somedir
$ bash ./somedir/test.sh
/tmp/somedir
$ . ./somedir/test.sh
/tmp/somedir
This is a script can get the shell file real path when executed or sourced.
Tested in bash, zsh, ksh, dash.
BTW: you shall clean the verbose code by yourself.
#!/usr/bin/env bash
echo "---------------- GET SELF PATH ----------------"
echo "NOW \$(pwd) >>> $(pwd)"
ORIGINAL_PWD_GETSELFPATHVAR=$(pwd)
echo "NOW \$0 >>> $0"
echo "NOW \$_ >>> $_"
echo "NOW \${0##*/} >>> ${0##*/}"
if test -n "$BASH"; then
echo "RUNNING IN BASH..."
SH_FILE_RUN_PATH_GETSELFPATHVAR=${BASH_SOURCE[0]}
elif test -n "$ZSH_NAME"; then
echo "RUNNING IN ZSH..."
SH_FILE_RUN_PATH_GETSELFPATHVAR=${(%):-%x}
elif test -n "$KSH_VERSION"; then
echo "RUNNING IN KSH..."
SH_FILE_RUN_PATH_GETSELFPATHVAR=${.sh.file}
else
echo "RUNNING IN DASH OR OTHERS ELSE..."
SH_FILE_RUN_PATH_GETSELFPATHVAR=$(lsof -p $$ -Fn0 | tr -d '\0' | grep "${0##*/}" | tail -1 | sed 's/^[^\/]*//g')
fi
echo "EXECUTING FILE PATH: $SH_FILE_RUN_PATH_GETSELFPATHVAR"
cd "$(dirname "$SH_FILE_RUN_PATH_GETSELFPATHVAR")" || return 1
SH_FILE_RUN_BASENAME_GETSELFPATHVAR=$(basename "$SH_FILE_RUN_PATH_GETSELFPATHVAR")
# Iterate down a (possible) chain of symlinks as lsof of macOS doesn't have -f option.
while [ -L "$SH_FILE_RUN_BASENAME_GETSELFPATHVAR" ]; do
SH_FILE_REAL_PATH_GETSELFPATHVAR=$(readlink "$SH_FILE_RUN_BASENAME_GETSELFPATHVAR")
cd "$(dirname "$SH_FILE_REAL_PATH_GETSELFPATHVAR")" || return 1
SH_FILE_RUN_BASENAME_GETSELFPATHVAR=$(basename "$SH_FILE_REAL_PATH_GETSELFPATHVAR")
done
# Compute the canonicalized name by finding the physical path
# for the directory we're in and appending the target file.
SH_SELF_PATH_DIR_RESULT=$(pwd -P)
SH_FILE_REAL_PATH_GETSELFPATHVAR=$SH_SELF_PATH_DIR_RESULT/$SH_FILE_RUN_BASENAME_GETSELFPATHVAR
echo "EXECUTING REAL PATH: $SH_FILE_REAL_PATH_GETSELFPATHVAR"
echo "EXECUTING FILE DIR: $SH_SELF_PATH_DIR_RESULT"
cd "$ORIGINAL_PWD_GETSELFPATHVAR" || return 1
unset ORIGINAL_PWD_GETSELFPATHVAR
unset SH_FILE_RUN_PATH_GETSELFPATHVAR
unset SH_FILE_RUN_BASENAME_GETSELFPATHVAR
unset SH_FILE_REAL_PATH_GETSELFPATHVAR
echo "---------------- GET SELF PATH ----------------"
# USE $SH_SELF_PATH_DIR_RESULT BEBLOW
I have tried $0 before, namely:
dirname $0
and it just returns "." even when the script is being sourced by another script:
. ../somedir/somescript.sh