I am a master student working with MonetDB for my thesis. I installed MonetDB and now I need to work with the DataCell extension to proceed. I am on Lubuntu 15.04 and started the MonetDB tutorial, however when I begin to work with the DataCell (https://www.monetdb.org/Documentation/Extensions/Streams), I keep finding errors.
For example, on the "set optimizer = 'datacell_pipe';" instruction, I get the error "optimizer 'datacell_pipe' unknown". I also tried the "sensor --host=localhost --port=50500 --events=1000 --columns=3 & " command, which is not found.
I am using the July 2015 release, and I installed every package related to the MonetDB on Linux repositories.
Thanks in advance!
DataCell was officially removed in the July2015 release, along with the required datacell_pipe optimiser. Mostly do the changes in the low-level APIs that its query pipeline relied on. The last release know to work good with DataCell was Feb2013-SP6.
There are plans for a port to the new version or a new implementation. Timing might not be great, if you plan to use it for master thesis - it will take a while until a new version is available.
Related
I have a very simple VGA macro in Excel that worked fine for awhile and now has stopped. I now get one of the two error message below:
The code is somewhat longer, but I've taken out the irrelevant lines; even what I have below doesn't work:
Public edgebot As WebDriver
Sub EUPatentClass()
edgebot.Start "edge"
End Sub
The references are as follows:
Current version of Edge is Version 108.0.1462.54 (Official build) (64-bit)
Current version of edgedriver.exe (renamed from msedgedriver.ext) is also Version 108.0.1462.54
I've tried uninstalling and then reinstalling Selenium 2.0.9, and also repairing .NET Core Runtime 3.1.32(x64) and .NET SDK 6.0.307(x64). I'm running Windows 10, ver 22H2 (Build 19045.2364), fully patched and up to date.
Can anyone give me a suggestion as to what to try next? THANKS!!!
I've been trying for hours, but can't build and use Light Table. Every time I try to run deploy/LightTable, it hangs on a screen that simply says "Light Table". I receive this error*:
[14381:0519/204037:INFO:CONSOLE(27860)] "Uncaught TypeError: Cannot read property 'thread_STAR_' of undefined", source: file:///home/zaz/Desktop/LightTable/builds/lighttable-0.8.0-linux/resources/app/core/node_modules/lighttable/bootstrap.js (27860)
Here's what I've tried:
git clone https://github.com/LightTable/LightTable.git
cd LightTable
bash linux_deps.sh
./deploy/LightTable # creates frozen window, throws the error above
cd deploy
./LightTable # creates frozen window, throws the error above
./ltbin # creates frozen window, throws the error above
I also tried similar things after checking out the atom-shell branch and the 0.7.2 tag (and cleaning up all the files from the previous build). Each time, I received the error above.
Does anyone know what's going on here?
Has Light Table been completely abandoned? It seems the last commit was in March.
* Depending on the version I was trying to run, I also received other errors, but I don't think they're relevant (the error above was the only one that appeared for all versions):
[18593:0519/222845:INFO:gpu_info_collector_x11.cc(80)] NVCtrl extension does not exist.
[18593:0519/222845:ERROR:browser_main_loop.cc(226)] Gdk: gdk_window_set_icon_list: icons too large
Fontconfig warning: FcPattern object size does not accept value 11(i)
[14413:0519/204035:INFO:renderer_main.cc(212)] Renderer process started
A year later (question was written in May 2015, now is June 2016), LightTable 0.8.1 is out, and I tried both Linux binary and cloned it from git, and it works fine.
For complete info, I'm using also Atom, and although I had not problems with "Cannot read property 'something' of undefined"" in Atom core, I met such problems in two or three Atom packages.
Both editors are based on same electron platform, LightTable is beautiful eye candy with quite revolutionary REPL integration, but it needs more polish to be usable to same extent as Atom.
For example, LightTable does not have workspace saving by default, that is done via plugin. That's ridiculous.
But although Atom looks so nice and powerful compared to simple editors, with realy huuuge number of available packages/plugins, LightTable is more elegant.
As I don't want to start new semi-religious war Atom vs LightTable resembling vi-vs-emacs, I'll stop here. :)
I can't replicate your problems in LightTable v0.8.1, so I think that answers this question. If not, please add errors you get with v0.8.1.
For info about releases, please check: https://github.com/LightTable/LightTable/releases
I have installed RedHawk 1.10.0 using Ubuntu 14.0.4LTS as described in appendix F of the RedHawk documentation. I also installed standalone IDE from SourceForge
again, as specified in appendix F, chapter 2.5. The IDE comes up looking ok, but here are the problems:
The components list is empty (there are supposed to be a set of pre-defined components). The directory is empty as well on the file system.
When attempting to generate C++ component, I get:
"Exception running "/bin/redhawk-codegen" /bin/redhawk-codegen - template=redhawk.codegen.jinja.cpp.component.pull --checkSupport
In detail, it said: bin/redhawk-codegen":error=2 no such file or directory. The /bin/redhawk-codegen is there under OSSIEHOME. The "pull" template is under: /usr/local/lib/python2.7/dist-packages/redhawk/codegen/jinja/cpp/component.
If I attempt to start Domain Manager I get an error "no domain configuration available".
So for all these problems it is obvious that I need to get a better picture of the expected file layout of all IDE and core RedHawk components. This is not clear from the documentation. Is there a starting point where I can begin debugging "where to find things"?
Regarding your first issue:
When installing for CentOS using the RPMs, a number of components, and devices are pre-packaged into the yum repository. When installing from source, as one must do for Ubuntu in 1.10, the pieces of Redhawk are modular and are installed individually.
The directions from Appendix F walk the user through installing each of the parts that make up the framework. The core, a GPP, bulkio, bustio, and the code generator. This does not include any components or devices (other than the GPP). To install these, you'll need to clone them from their respective git repositories and build and install from source either from the command line, or through the REDHAWK IDE. Building and installing the components from the command line follows the same pattern as the framework, there is a reconf script, which creates the configure script which creates the makefile script. eg. ./reconf; ./configure; make; sudo make install
Regarding your second issue:
These symptoms seem to point to the OSSIEHOME and SDRROOT variables not being set. Make sure that the OSSIEHOME and SDRROOT variables are set in the terminal using "echo $SDRROOT" and "echo $OSSIEHOME" prior to running the IDE. Keep in mind that the environments are unique to each session so, for example, having them set in one bash terminal does not guarantee they are set when launching the IDE from a desktop shortcut. Confirm they are set in your terminal, then launch the IDE from the same terminal.
Regarding your last issue:
This is likely also caused by your second issue. However, if it is not resolved following the above steps, take a look within $SDRROOT/dom/domain There should be two files. One DomainManager.dmd.xml.template and one DomainManager.dmd.xml. If all you have is the template then you need to create the DomainManager.dmd.xml file by copying the template. Then edit it and fill in the id and name fields. The default name is generally REDHAWK_DEV and the id should be a UUID.
I have a very strange problem with the constructor of AptPkg::Cache object in the precise package of libapt-pkg-perl (v. 0.1.25).
The perl script is designed to download a debian package for three different architectures (i386, armel, armhf). For each architecture I do the following:
Configure AptPkg::Config '$_config' with the right parameters and package-lists for the desired architecture.
Create the cache object with AptPkg::Cache->new .
Call the method AptPkg::Cache->policy to create the AptPkg::Policy object.
Call the method AptPkg::Policy->candidate("program-name") .
Download the package for the selected architecture.
This works very well with Ubuntu Lucid, but with Ubuntu Precise I can only download the package for the first architecture defined. For the other two architectures there will be no installation candidate (method AptPkg::Policy->candidate("Package-Name") doesn't return an object).
I tried to build a workaround and I found one solution how the script works for all three architectures, without problems, in precise:
If I create the cache object (with AptPkg::Cache->new) twice in a row it works and the script downloads the debian package for all three architectures:
my $cache = AptPkg::Cache->new;
$cache = AptPkg::Cache->new;
I'm sure that the problem has something to do with the method AptPkg::Cache->new because I checked everything else, what could cause the problem, twice. All config-variables are set correctly and I even get a different Hash for AptPkg::Cache->new for each architecture, but it seems that I am overlooking something important.
I'm not very familiar with perl, so I am asking you guys if someone can explain why the script works with the workaround but not without it. Further it looks quite strange if you have the same line of code twice in your script.
Maybe you hit this bug - https://bugs.launchpad.net/ubuntu/+source/libapt-pkg-perl/+bug/994509
There is a script there to test if you're affected. If it's something else consider submitting a bug report.
edit: Just saw this is 11 months old :/
On the gentoo Linux server I use, I've just upgraded APC from 3.0.19 to 3.1.4 and it appears as if something is not working properly there. It appears as if cache entries which should have been deleted (either explicitly or via TTL expiry) stay in place and so cache use keeps growing until it reaches the max usage memory and then the server becomes extremely slow.
Anyone with some experience on this upgrade?
Thanks
Here's my apc.ini
extension=apc.so
apc.enabled="1"
apc.shm_segments="1"
apc.shm_size="1536"
apc.num_files_hint="2500"
apc.ttl="7200"
apc.user_ttl="86400"
apc.gc_ttl="3600"
apc.cache_by_default="1"
;apc.filters=""
;apc.mmap_file_mask="/tmp/apcphp5.XXXXXX"
apc.slam_defense="0"
apc.file_update_protection="2"
apc.enable_cli="1"
apc.max_file_size="5M"
apc.stat="0"
apc.write_lock="1"
apc.report_autofilter="0"
apc.include_once_override="0"
apc.rfc1867="0"
apc.rfc1867_prefix="upload_"
apc.rfc1867_name="APC_UPLOAD_PROGRESS"
apc.rfc1867_freq="0"
apc.localcache="0"
apc.localcache.size="512"
apc.coredump_unmap="0"
This was seemingly a Gentoo linux related bug. I've reported it on http://bugs.gentoo.org/show_bug.cgi?id=343485 and it's been fixed for APC 3.1.5
I had problem with APC 3.1.5 when I set the apc.shm_size with only the numeric value.
Try out apc.shm_size="1536M", maybe it helps (the default value in the documentation also uses this formula)