What's the best way to find and replace the values of all keys in a file without precising the keys ?
Example :
originalFile.txt ------------------------------------> newFile.txt
key1=a key1=$key1
key2=b key2=$key2
key3=c key3=$key3
I came up with this but I'm not able to do it dynamically for any new added key :
sed '/^key1/s/=.*$/= $key1/' newFile.txt
awk -vFS="=" -v OFS="=" '$2="$"$1' originalFile.txt
Using sed: using back referencing capture the left of = in \1 and right of = in \2:
sed -r 's/(^[^=]+)*=(.*)/\1=$\1/g' originalFile.txt
key1=$key1
key2=$key2
key3=$key3
This should do it:
sed -re 's/^(key[[:digit:]]+)=.*$/\1=\$\1/' originalFile.txt
It works because (since the -r options is used) a pair of parentheses captures its match. In the substitution pattern, the \1 reproduces the text matched.
this script extract the password from env and include it in the new file:
while read line; do
password=$(echo $line | sed "s/\(.*\)=.*/\1/g")
newpassword="$(printenv $password)"
if [ -n "$newpassword" ]; then
echo "$password=$newpassword"
else
echo $line
fi
done <originalFile.txt >newFile.txt
From command line, how to change to uppercase each first word of a line in a text file?
Example input:
hello world
tell me who you are!
Example output:
HELLO world
TELL me who you are!
There are no empty lines, it's ASCII, and each line starts with an alphabetic word followed by a tab.
Tools to use: anything that works on command line on macOS (bash 3.2, BSD sed, awk, tr, perl 5, python 2.7, swift 4, etc.).
You can always just use bash case conversion and a while loop to accomplish what you intend, e.g.
$ while read -r a b; do echo "${a^^} $b"; done < file
HELLO world
HOW are you?
The parameter expansion ${var^^} converts all chars in var to uppercase, ${var^} converts the first letter.
Bash 3.2 - 'tr'
For earlier bash, you can use the same setup with tr with a herestring to handle the case conversion:
$ while read -r a b; do echo "$(tr [a-z] [A-Z] <<<"$a") $b"; done file
HELLO world
HOW are you?
Preserving \t Characters
To preserve the tab separated words, you have to prevent word-splitting during the read. Unfortunately, the -d option to read doesn't allow termination on a set of characters. A way around checking for both spaces or tab delimited words is the read the entire line disabling word-splitting with IFS= and then scanning forward through the line until the first literal $' ' or $'\t' is found. (the literals are bash-only, not POSIX shell) A simple implementation would be:
while IFS= read -r line; do
word=
ct=0
for ((i = 0; i < ${#line}; i++)); do
ct=$i
## check against literal 'space' or 'tab'
[ "${line:$i:1}" = $' ' -o "${line:$i:1}" = $'\t' ] && break
word="${word}${line:$i:1}"
done
word="$(tr [a-z] [A-Z] <<<"$word")"
echo "${word}${line:$((ct))}"
done <file
Output of tab Separated Words
HELLO world
HOW are you?
Use awk one-liner:
awk -F$'\t' -v OFS=$'\t' '{ $1 = toupper($1) }1' file
Using GNU sed:
sed 's/^\S*/\U&/g' file
where \S matches a non-whitespace character and \U& uppercases the matched pattern
UPDATE: in case of BSD sed since it does not support most of those special characters it is still doable but requires a much longer expression
sed -f script file
where the script contains
{
h
s/ .*//
y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/
G
s/\(.*\)\n[^ ]* \(.*\)/\1 \2/
}
Bash scripting. How can i get a simple while loop to go through a file with below content and strip out all character from T (including T) using sed
"2012-05-04T10:16:04Z"
"2012-04-05T15:27:40Z"
"2012-03-05T14:58:27Z"
"2011-11-29T15:04:09Z"
"2011-11-16T12:12:00Z"
Thanks
A simple awk command to do this:
awk -F '["T]' '{print $2}' file
2012-05-04
2012-04-05
2012-03-05
2011-11-29
2011-11-16
Through sed,
sed 's/"\|T.*//g' file
"matches double quotes \| or T.* starts from the first T match all the characters upto the last. Replacing the matched characters with an empty string will give you the desired output.
Example:
$ echo '"2012-05-04T10:16:04Z"' | sed 's/"\|T.*//g'
2012-05-04
With bash builtins:
while IFS='T"' read -r a a b; do echo "$a"; done < filename
Output:
2012-05-04
2012-04-05
2012-03-05
2011-11-29
2011-11-16
I am wrinting a shell script and have a variable like this: something-that-is-hyphenated.
I need to use it in various points in the script as:
something-that-is-hyphenated, somethingthatishyphenated, SomethingThatIsHyphenated
I have managed to change it to somethingthatishyphenated by stripping out - using sed "s/-//g".
I am sure there is a simpler way, and also, need to know how to get the camel cased version.
Edit: Working function derived from #Michał's answer
function hyphenToCamel {
tr '-' '\n' | awk '{printf "%s%s", toupper(substr($0,1,1)), substr($0,2)}'
}
CAMEL=$(echo something-that-is-hyphenated | hyphenToCamel)
echo $CAMEL
Edit: Finally, a sed one liner thanks to #glenn
echo a-hyphenated-string | sed -E "s/(^|-)([a-z])/\u\2/g"
a GNU sed one-liner
echo something-that-is-hyphenated |
sed -e 's/-\([a-z]\)/\u\1/g' -e 's/^[a-z]/\u&/'
\u in the replacement string is documented in the sed manual.
Pure bashism:
var0=something-that-is-hyphenated
var1=(${var0//-/ })
var2=${var1[*]^}
var3=${var2// /}
echo $var3
SomethingThatIsHyphenated
Line 1 is trivial.
Line 2 is the bashism for replaceAll or 's/-/ /g', wrapped in parens, to build an array.
Line 3 uses ${foo^}, which means uppercase (while ${foo,} would mean 'lowercase' [note, how ^ points up while , points down]) but to operate on every first letter of a word, we address the whole array with ${foo[*]} (or ${foo[#]}, if you would prefer that).
Line 4 is again a replace-all: blank with nothing.
Line 5 is trivial again.
You can define a function:
hypenToCamel() {
tr '-' '\n' | awk '{printf "%s%s", toupper(substr($0,0,1)), substr($0,2)}'
}
CAMEL=$(echo something-that-is-hyphenated | hypenToCamel)
echo $CAMEL
In the shell you are stuck with being messy:
aa="aaa-aaa-bbb-bbb"
echo " $aa" | sed -e 's/--*/ /g' -e 's/ a/A/g' -e 's/ b/B/g' ... -e 's/ *//g'
Note the carefully placed space in the echo and the double space in the last -e.
I leave it as an exercise to complete the code.
In perl it is a bit easier as a one-line shell command:
perl -e 'print map{ $a = ucfirst; $a =~ s/ +//g; $a} split( /-+/, $ARGV[0] ), "\n"' $aa
For the records, here's a pure Bash safe method (that is not subject to pathname expansion)—using Bash≥4:
var0=something-that-is-hyphenated
IFS=- read -r -d '' -a var1 < <(printf '%s\0' "${var0,,}")
printf '%s' "${var1[#]^}"
This (safely) splits the lowercase expansion of var0 at the hyphens, with each split part in array var1. Then we use the ^ parameter expansion to uppercase the first character of the fields of this array, and concatenate them.
If your variable may also contain spaces and you want to act on them too, change IFS=- into IFS='- '.
In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.
Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.
The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.
The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf
It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.
It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"
Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare
Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.
These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e
sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )
There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.
Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test
don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"
If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;
If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test
I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.
An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt