How can I uncomment a line // Configure::write('debug', 2); using sed? I've tried
sed 's+// Configure::write('debug', 2);+Configure::write('debug', 2);+g' -I file
The problem is you are using single quotes both to denote the argument and you have them inside the string you are trying to match, so the shell just strips them, and the match fails.
Use double quotes around the argument:
sed "s+// Configure::write('debug', 2);+Configure::write('debug', 2);+g" -i file
Note that depending on the version of sed you are using, you may need to escape the parentheses so they are not treated as a capture group.
I tested with GNU sed version 4.7 and it is not needed, the example above works, but it also expects a lower case i as the "in place" parameter.
I am trying to change the values in a text file using sed in a Bash script with the line,
sed 's/draw($prev_number;n_)/draw($number;n_)/g' file.txt > tmp
This will be in a for loop. Why is it not working?
Variables inside ' don't get substituted in Bash. To get string substitution (or interpolation, if you're familiar with Perl) you would need to change it to use double quotes " instead of the single quotes:
# Enclose the entire expression in double quotes
$ sed "s/draw($prev_number;n_)/draw($number;n_)/g" file.txt > tmp
# Or, concatenate strings with only variables inside double quotes
# This would restrict expansion to the relevant portion
# and prevent accidental expansion for !, backticks, etc.
$ sed 's/draw('"$prev_number"';n_)/draw('"$number"';n_)/g' file.txt > tmp
# A variable cannot contain arbitrary characters
# See link in the further reading section for details
$ a='foo
bar'
$ echo 'baz' | sed 's/baz/'"$a"'/g'
sed: -e expression #1, char 9: unterminated `s' command
Further Reading:
Difference between single and double quotes in Bash
Is it possible to escape regex metacharacters reliably with sed
Using different delimiters for sed substitute command
Unless you need it in a different file you can use the -i flag to change the file in place
Variables within single quotes are not expanded, but within double quotes they are. Use double quotes in this case.
sed "s/draw($prev_number;n_)/draw($number;n_)/g" file.txt > tmp
You could also make it work with eval, but don’t do that!!
This may help:
sed "s/draw($prev_number;n_)/draw($number;n_)/g"
You can use variables like below. Like here, I wanted to replace hostname i.e., a system variable in the file. I am looking for string look.me and replacing that whole line with look.me=<system_name>
sed -i "s/.*look.me.*/look.me=`hostname`/"
You can also store your system value in another variable and can use that variable for substitution.
host_var=`hostname`
sed -i "s/.*look.me.*/look.me=$host_var/"
Input file:
look.me=demonic
Output of file (assuming my system name is prod-cfm-frontend-1-usa-central-1):
look.me=prod-cfm-frontend-1-usa-central-1
I needed to input github tags from my release within github actions. So that on release it will automatically package up and push code to artifactory.
Here is how I did it. :)
- name: Invoke build
run: |
# Gets the Tag number from the release
TAGNUMBER=$(echo $GITHUB_REF | cut -d / -f 3)
# Setups a string to be used by sed
FINDANDREPLACE='s/${GITHUBACTIONSTAG}/'$(echo $TAGNUMBER)/
# Updates the setup.cfg file within version number
sed -i $FINDANDREPLACE setup.cfg
# Installs prerequisites and pushes
pip install -r requirements-dev.txt
invoke build
Retrospectively I wish I did this in python with tests. However it was fun todo some bash.
Another variant, using printf:
SED_EXPR="$(printf -- 's/draw(%s;n_)/draw(%s;n_)/g' $prev_number $number)"
sed "${SED_EXPR}" file.txt
or in one line:
sed "$(printf -- 's/draw(%s;n_)/draw(%s;n_)/g' $prev_number $number)" file.txt
Using printf to build the replacement expression should be safe against all kinds of weird things, which is why I like this variant.
I have a file, and I am trying to use bask to replace all the contents of a substring with a path.
I can use the command:
sed -i s/{WORKSPACE}/$MYVARIABLE/g /var/lib/jenkins/jobs/MY-JOB/workspace/config/params.ini
My config/params.ini looks like:
[folders]
folder1 = {WORKSPACE}/subfolder1
folder2 = {WORKSPACE}/subfolder2
however, when $MYVARIABLE is a path, it fails (containing slashes), the sed command fails with:
sed: -e expression #1, char 16: unknown option to `s'
When I run through it manually, I see that the $MYVARIABLE needs to have it's path-slashes escaped. How can I modify my sed command to incorporate an escaped version of $MYVARIABLE?
There's nothing saying you have to use / as your delimiter. sed will use (almost) anything you stick in there. I have a tendency to use |, since that never (rarely?) appears in a path.
sridhar#century:~> export boong=FLEAK
sridhar#century:~> echo $PATH | sed "s|/bin|/$boong|g"
~/FLEAK:/usr/local/FLEAK:/usr/local/sbin:/usr/local/games:/FLEAK:/sbin:/usr/FLEAK:/usr/sbin:/usr/games:/usr/lib/lightdm/lightdm:/home/oracle/app/oracle/product/12.1.0/server_1/FLEAK
sridhar#century:~>
Using double-quotes will allow the shell to do the variable-substitution.
Just escape the $ sign, and use a different delimiter:
sed -i 's;{WORKSPACE};\$MYVARIABLE;g' your_file
I have a text file which has a particular line something like
sometext sometext sometext TEXT_TO_BE_REPLACED sometext sometext sometext
I need to replace the whole line above with
This line is removed by the admin.
The search keyword is TEXT_TO_BE_REPLACED
I need to write a shell script for this. How can I achieve this using sed?
You can use the change command to replace the entire line, and the -i flag to make the changes in-place. For example, using GNU sed:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
You need to use wildcards (.*) before and after to replace the whole line:
sed 's/.*TEXT_TO_BE_REPLACED.*/This line is removed by the admin./'
The Answer above:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
Works fine if the replacement string/line is not a variable.
The issue is that on Redhat 5 the \ after the c escapes the $. A double \\ did not work either (at least on Redhat 5).
Through hit and trial, I discovered that the \ after the c is redundant if your replacement string/line is only a single line. So I did not use \ after the c, used a variable as a single replacement line and it was joy.
The code would look something like:
sed -i "/TEXT_TO_BE_REPLACED/c $REPLACEMENT_TEXT_STRING" /tmp/foo
Note the use of double quotes instead of single quotes.
The accepted answer did not work for me for several reasons:
my version of sed does not like -i with a zero length extension
the syntax of the c\ command is weird and I couldn't get it to work
I didn't realize some of my issues are coming from unescaped slashes
So here is the solution I came up with which I think should work for most cases:
function escape_slashes {
sed 's/\//\\\//g'
}
function change_line {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | escape_slashes)
# FIX: No space after the option i.
sed -i.bak '/'"${OLD_LINE_PATTERN}"'/s/.*/'"${NEW}"'/' "${FILE}"
mv "${FILE}.bak" /tmp/
}
So the sample usage to fix the problem posed:
change_line "TEXT_TO_BE_REPLACED" "This line is removed by the admin." yourFile
All of the answers provided so far assume that you know something about the text to be replaced which makes sense, since that's what the OP asked. I'm providing an answer that assumes you know nothing about the text to be replaced and that there may be a separate line in the file with the same or similar content that you do not want to be replaced. Furthermore, I'm assuming you know the line number of the line to be replaced.
The following examples demonstrate the removing or changing of text by specific line numbers:
# replace line 17 with some replacement text and make changes in file (-i switch)
# the "-i" switch indicates that we want to change the file. Leave it out if you'd
# just like to see the potential changes output to the terminal window.
# "17s" indicates that we're searching line 17
# ".*" indicates that we want to change the text of the entire line
# "REPLACEMENT-TEXT" is the new text to put on that line
# "PATH-TO-FILE" tells us what file to operate on
sed -i '17s/.*/REPLACEMENT-TEXT/' PATH-TO-FILE
# replace specific text on line 3
sed -i '3s/TEXT-TO-REPLACE/REPLACEMENT-TEXT/'
for manipulation of config files
i came up with this solution inspired by skensell answer
configLine [searchPattern] [replaceLine] [filePath]
it will:
create the file if not exists
replace the whole line (all lines) where searchPattern matched
add replaceLine on the end of the file if pattern was not found
Function:
function configLine {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | sed 's/\//\\\//g')
touch "${FILE}"
sed -i '/'"${OLD_LINE_PATTERN}"'/{s/.*/'"${NEW}"'/;h};${x;/./{x;q100};x}' "${FILE}"
if [[ $? -ne 100 ]] && [[ ${NEW_LINE} != '' ]]
then
echo "${NEW_LINE}" >> "${FILE}"
fi
}
the crazy exit status magic comes from https://stackoverflow.com/a/12145797/1262663
In my makefile I use this:
#sed -i '/.*Revision:.*/c\'"`svn info -R main.cpp | awk '/^Rev/'`"'' README.md
PS: DO NOT forget that the -i changes actually the text in the file... so if the pattern you defined as "Revision" will change, you will also change the pattern to replace.
Example output:
Abc-Project written by John Doe
Revision: 1190
So if you set the pattern "Revision: 1190" it's obviously not the same as you defined them as "Revision:" only...
bash-4.1$ new_db_host="DB_HOSTNAME=good replaced with 122.334.567.90"
bash-4.1$
bash-4.1$ sed -i "/DB_HOST/c $new_db_host" test4sed
vim test4sed
'
'
'
DB_HOSTNAME=good replaced with 122.334.567.90
'
it works fine
To do this without relying on any GNUisms such as -i without a parameter or c without a linebreak:
sed '/TEXT_TO_BE_REPLACED/c\
This line is removed by the admin.
' infile > tmpfile && mv tmpfile infile
In this (POSIX compliant) form of the command
c\
text
text can consist of one or multiple lines, and linebreaks that should become part of the replacement have to be escaped:
c\
line1\
line2
s/x/y/
where s/x/y/ is a new sed command after the pattern space has been replaced by the two lines
line1
line2
cat find_replace | while read pattern replacement ; do
sed -i "/${pattern}/c ${replacement}" file
done
find_replace file contains 2 columns, c1 with pattern to match, c2 with replacement, the sed loop replaces each line conatining one of the pattern of variable 1
To replace whole line containing a specified string with the content of that line
Text file:
Row: 0 last_time_contacted=0, display_name=Mozart, _id=100, phonebook_bucket_alt=2
Row: 1 last_time_contacted=0, display_name=Bach, _id=101, phonebook_bucket_alt=2
Single string:
$ sed 's/.* display_name=\([[:alpha:]]\+\).*/\1/'
output:
100
101
Multiple strings delimited by white-space:
$ sed 's/.* display_name=\([[:alpha:]]\+\).* _id=\([[:digit:]]\+\).*/\1 \2/'
output:
Mozart 100
Bach 101
Adjust regex to meet your needs
[:alpha] and [:digit:]
are Character Classes and Bracket Expressions
This worked for me:
sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
An example is:
sed -i .bak -e '7s/.*version.*/ version = "4.33.0"/'
-i: The extension for the backup file after the replacement. In this case, it is .bak.
-e: The sed script. In this case, it is '7s/.*version.*/ version = "4.33.0"/'. If you want to use a sed file use the -f flag
s: The line number in the file to be replaced. In this case, it is 7s which means line 7.
Note:
If you want to do a recursive find and replace with sed then you can grep to the beginning of the command:
grep -rl --exclude-dir=<directory-to-exclude> --include=\*<Files to include> "<Line to be replaced>" ./ | sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
The question asks for solutions using sed, but if that's not a hard requirement then there is another option which might be a wiser choice.
The accepted answer suggests sed -i and describes it as replacing the file in-place, but -i doesn't really do that and instead does the equivalent of sed pattern file > tmp; mv tmp file, preserving ownership and modes. This is not ideal in many circumstances. In general I do not recommend running sed -i non-interactively as part of an automatic process--it's like setting a bomb with a fuse of an unknown length. Sooner or later it will blow up on someone.
To actually edit a file "in place" and replace a line matching a pattern with some other content you would be well served to use an actual text editor. This is how it's done with ed, the standard text editor.
printf '%s\n' '/TEXT_TO_BE_REPLACED/' d i 'This line is removed by the admin' . w q | \
ed -s /tmp/foo > /dev/null
Note that this only replaces the first matching line, which is what the question implied was wanted. This is a material difference from most of the other answers.
That disadvantage aside, there are some advantages to using ed over sed:
You can replace the match with one or multiple lines without any extra effort.
The replacement text can be arbitrarily complex without needing any escaping to protect it.
Most importantly, the original file is opened, modified, and saved. A copy is not made.
How it works
How it works:
printf will use its first argument as a format string and print each of its other arguments using that format, effectively meaning that each argument to printf becomes a line of output, which is all sent to ed on stdin.
The first line is a regex pattern match which causes ed to move its notion of "the current line" forward to the first line that matches (if there is no match the current line is set to the last line of the file).
The next is the d command which instructs ed to delete the entire current line.
After that is the i command which puts ed into insert mode;
after that all subsequent lines entered are written to the current line (or additional lines if there are any embedded newlines). This means you can expand a variable (e.g. "$foo") containing multiple lines here and it will insert all of them.
Insert mode ends when ed sees a line consisting of .
The w command writes the content of the file to disk, and
the q command quits.
The ed command is given the -s switch, putting it into silent mode so it doesn't echo any information as it runs,
the file to be edited is given as an argument to ed,
and, finally, stdout is thrown away to prevent the line matching the regex from being printed.
Some Unix-like systems may (inappropriately) ship without an ed installed, but may still ship with an ex; if so you can simply use it instead. If have vim but no ex or ed you can use vim -e instead. If you have only standard vi but no ex or ed, complain to your sysadmin.
It is as similar to above one..
sed 's/[A-Za-z0-9]*TEXT_TO_BE_REPLACED.[A-Za-z0-9]*/This line is removed by the admin./'
Below command is working for me. Which is working with variables
sed -i "/\<$E\>/c $D" "$B"
I very often use regex to extract data from files I just used that to replace the literal quote \" with // nothing :-)
cat file.csv | egrep '^\"([0-9]{1,3}\.[0-9]{1,3}\.)' | sed s/\"//g | cut -d, -f1 > list.txt
I'm trying to write a shell script that does a search and replace inside a configuration file upon start-up.
The string we're trying to replace is:
include /etc/nginx/https.include;
and we want to replace it with a commented version:
#include /etc/nginx/https.include;
The file that contains the string that we want to replace is:
/etc/nginx/app-servers.include
I'm not a Linux guru and can't seem to find the command to do this.
perl -p -i -e 's%^(include /etc/nginx/https.include;)$%#$1%' /etc/nginx/ap-servers.include
If the line might not end in the ;, use instead:
perl -p -i -e 's%^(include /etc/nginx/https.include;.*)$%#$1%' /etc/nginx/ap-servers.include
If you want to preserve the original file, add a backup extension after -i:
perl -p -i.bak -e 's%^(include /etc/nginx/https.include;)$%#$1%' /etc/nginx/ap-servers.include
Now, explaining. The -p flag means replace in-place. All lines of the file will be fed to the expression, and the result will be used as replacement. The -i flag indicates the extension of the backup file. By using it without anything, you prevent generation of backups. The -e tells Perl to get the following parameter as an expression to be executed.
Now, the expression is s%something%other%. I use % instead of the more traditional / to avoid having to escape the slashes of the path. I use parenthesis in the expression and $1 in the substituted expression for safety -- if you change one, the other will follow. Thus, %#$1% is actually the second % of s, followed by the desired #, $1 indicating the pattern inside parenthesis, and the last % of s.
HTH. HAND.
sed -i 's/foo/bar/g' config.txt
This replaces all instances of foo (case insensitive) with bar in the file config.txt
Check out sed:
sed -i -r 's|^(include /etc/nginx/https.include;)$|#\1|' /etc/nginx/app-servers.include
-i means do the substitution in-place and -r means to use extended regular expressions.
cd pathname
for y in `ls *`;
do sed "s/ABCD/DCBA/g" $y > temp; mv temp $y;
done
This script shold replace string ABCD to DCBA in all the files in pathname