I have created dummy project to figure out how Cucumber for android works and followed the "tutorial" here
https://www.jetbrains.com/idea/help/enabling-cucumber-support-in-project.html
I am using IntelliJ IDEA IDE as you can see and my feature looks like this:
Feature: Testing
Scenario: Testiranje
Given I am on the 'New Pet' page
And I press "Registrer"
Then I should go to the "Registrer" page
Given I am on the new pet page
And Java file:
public class ProradiStepDefs
{
#Given("^I am on the 'New Pet' page$")
public void I_am_on_the_New_Pet_page() throws Throwable
{
}
#And("^I press \\\"([^\\\"]*)\\\"$")
public void I_press(String arg1) throws Throwable
{
System.out.println(arg1);
}
#Then("^I should go to the \\\"([^\\\"]*)\\\" page$")
public void I_should_go_to_the_page(String arg1) throws Throwable
{
System.out.println(arg1);
throw new PendingException();
}
#Given("I am on the new pet page")
public void I_am_on_the_new_pet_page() throws Throwable
{
}
}
And when I start Cucumber java tests I got this in console:
1 Scenarios (1 undefined)
4 Steps (4 undefined)
0m0.000s
You can implement missing steps with the snippets below:
Given("^I am on the 'New Pet' page$", () -> {
// Write code here that turns the phrase above into concrete actions
throw new PendingException();
});
Given("^I press \"([^\"]*)\"$", (String arg1) -> {
// Write code here that turns the phrase above into concrete actions
throw new PendingException();
});
Then("^I should go to the \"([^\"]*)\" page$", (String arg1) -> {
// Write code here that turns the phrase above into concrete actions
throw new PendingException();
});
Given("^I am on the new pet page$", () -> {
// Write code here that turns the phrase above into concrete actions
throw new PendingException();
});
Process finished with exit code 0
Try to run tests with option -r features
Related
I am trying to cover few lines of the code with junit test case. Though the test case is covering the lines which I found after debugging the test case, but in Sonarqube Coverage on new code those lines are not showing as covered ..
Below is the code :
#Override
public StandardMapper createMapper(Services services) {
val objectMapper = ObjectMapperFactory.createObjectMapper();
TransformerPool transformerPool = new TransformerPool(getTransformerPoolSize());
try (RetryingTransporter retryingTransporter = new RetryingTransporter(
new SoapTransporter(objectMapper,Configuration.class));
ResponseGeneratorService responseGeneratorService = new ResponseGeneratorService(
JAXBContext.newInstance(Response.class));
ConfigurationReader configurationReader = new ConfigurationReader();
ParsingTransformer parsingTransformer = new ParsingTransformer(
new RequestTransformerService(transformerPool));) {
return new StandardMapper(configurationReader, parsingTransformer, retryingTransporter,
responseGeneratorService);
} catch (Exception e) {
log.error(TransformerConstants.TRANSFORM + TransformerConstants.ERROR_101, e);
}
return null;
}
private int getTransformerPoolSize() {
try {
String poolSize = ((Function<String, String>) System::getenv).apply(TransformerConstants.TRANSFORMER_POOL_SIZE);
return Integer.parseInt(poolSize);
} catch (NumberFormatException nfe) {
log.error(TransformerConstants.TRANSFORMER_POOL_INITIALIZATION_ERROR, nfe);
}
return TransformerConstants.DEFAULT_TRANSFORMER_POOL_SIZE;
}
and test case for the above scenario is
#Test
public void testCreateMapper_validTransformerPoolSize() throws Exception {
restoreSystemProperties(() -> {
withEnvironmentVariable(TransformerConstants.TRANSFORMER_POOL_SIZE, "7").execute(() -> {
Assert.assertTrue(factory.createMapper(null) instanceof StandardMapper);
});
});
}
The above test case is passing and covers lines from getTransformerPoolSize() method but when I run above test case and put debugger point at return Integer.parseInt(poolSize); debugger points comes there but in sonarqube code coverage for new code it doesn't shows as covered ..
Below line from getTransformerPoolSize method is not getting covered even though Junit test case is covering that ..
return Integer.parseInt(poolSize);
Can someone suggest how to fix this issue ?
I have a test project with Room database. Using Asynctask I can successfully insert an object with some test data into the database. I'm trying to learn RxJava and replace Asynctask with RxJava's observer, but it doesn't work. I have read alot of documentation and watched tutorials, but I don't think I quite get it. Here's the relevant code:
Here I set my Room object with the data from my List:
for(ObjectForArray item: listToDatabase) {
myRoomEntity.setName( item.getName() );
Log.d( "TAG", myRoomEntity.getName() );
}
Then I try to use RxJava Observable to insert data into the database. This was originally and successfully done using Asynctask:
Observable<MyRoomEntity> myRX = Observable
.just(myRoomEntity)
.subscribeOn( Schedulers.io() )
.observeOn( AndroidSchedulers.mainThread() );
myRX.subscribe( new Observer<MyRoomEntity>() {
#Override
public void onSubscribe(Disposable d) {
Log.d("TAG ONSUBSCRIBE", d.toString());
try {
myViewModel.insertDatabase( myRoomEntity );
Log.d( "TAG", "Populating database Success" );
}catch(Error error) {
Log.d( "TAG", error.toString() );
}
}
The OnNext, OnError and OnComplete are empty.
When I run the project it crashes with the error:
Cannot access database on the main thread since it may potentially lock the UI for a long period of time.
I'm obviously using RxJava wrong since the point is to do asynchronous tasks away from the main thread.
i have use RX java in replace of Asyntask as it has been deprecated in android 9
there are multiple replacements that android provides like Executors, threads, Listenable Futures , Coroutines 🔥, so you are looking how to implement this with rxjava and how RX Java java helps your to migrate just add these dependencies first in gradle
implementation "io.reactivex.rxjava2:rxjava:2.2.20"
implementation "io.reactivex.rxjava2:rxandroid:2.1.1"
once you import lets start working with RX java i will let you know where you can put background task, pre execute, on post execute like asynctask
lets start codding with Rx java first , i have comment in the method that will help you to put the code
Observable.fromCallable(new Callable<Boolean>() {
#Override
public Boolean call() throws Exception {
/// here is your background task
return true;
}
}).subscribeOn(Schedulers.io()).observeOn(AndroidSchedulers.mainThread())
.subscribe(new Observer<Boolean>() {
#Override
public void onSubscribe(Disposable d) {
//// pre execute here is my progress dialog
showProgressDialog(getString(R.string.scanning));
}
#Override
public void onNext(Boolean aBoolean) {
//// here is on sucess you can do anystuff here like
if (aBoolean){
/// if its value true you can go ahead with this
}
}
#Override
public void onError(Throwable e) {
/// this helps you to go if there is any error show dialog whatever you wants here
Log.e("error of kind",e.getMessage() );
}
#Override
public void onComplete() {
/// when your task done means post execute
}
});
once its done lets start working with implementation
Observable.fromCallable(new Callable<Boolean>() {
#Override
public Boolean call() throws Exception {
/// here is your background task
uribitmap = getScannedBitmap(original, points);
uri = Utils.getUri(getActivity(), uribitmap);
scanner.onScanFinish(uri);
return true;
}
}).subscribeOn(Schedulers.io()).observeOn(AndroidSchedulers.mainThread())
.subscribe(new Observer<Boolean>() {
#Override
public void onSubscribe(Disposable d) {
//// pre execute here is my progress dialog
showProgressDialog(getString(R.string.scanning));
}
#Override
public void onNext(Boolean aBoolean) {
//// here is on sucess you can do anystuff here like
if (aBoolean){
/// if its value true you can go ahead with this
}
}
#Override
public void onError(Throwable e) {
/// this helps you to go if there is any error show dialog whatever you wants here
Log.e("error of kind",e.getMessage() );
}
#Override
public void onComplete() {
/// when your task done means post execute
uribitmap.recycle();
dismissDialog();
}
});
now i will do this with executors :
/// pre execute you can trigger to progress dialog
showProgressDialog(getString(R.string.scanning));
ExecutorService executors = Executors.newSingleThreadExecutor();
executors.execute(new Runnable() {
#Override
public void run() {
//// do background heavy task here
final Bitmap uribitmap = getScannedBitmap(original, points);
uri = Utils.getUri(getActivity(), uribitmap);
scanner.onScanFinish(uri);
new Handler(Looper.getMainLooper()).post(new Runnable() {
#Override
public void run() {
//// Ui thread work like
uribitmap.recycle();
dismissDialog();
}
});
}
});
You are getting this error because you are trying to insert an Object on the main (UI) thread.
You should do something like this:
Observable.fromCallable(() -> myViewModel.insertDatabase( myRoomEntity ))
.subscribeOn( Schedulers.io() )
.observeOn( AndroidSchedulers.mainThread() );
And then use an Observer to subscribe to the Observable.
Please try restructuring your code like this:
Completable.fromAction(() -> myViewModel.insertDatabase(myRoomEntity))
.subscribeOn(Schedulers.io())
.observeOn(AndroidSchedulers.mainThread())
.subscribe(() -> Log.d("TAG", "Populating database Success"),
throwable -> Log.d("TAG", throwable.toString()))
Considerations:
If your myRoomEntity is not available before this whole construct gets subscribed, make sure you use defer http://reactivex.io/documentation/operators/defer.html
Your subscribe section handlers are operating on "main", that's why you were receiving a crash.
If possible, avoid unnecessary just calls
Hello Liferay Experts,
I have a requirement where I need to stop an Admin from assigning a role, I am trying to implement this with a ModelListener.
Here is the code..
#Component(immediate = true, service = ModelListener.class)
public class TestUserModelListener extends BaseModelListener<User> {
#Override
public void onBeforeAddAssociation(Object classPK, String associationClassName, Objext accociationClassPK) throws ModelListenerException {
// ...
throw new ModelListenerException("User creation not allowed");
}
}
When this code executes, the exception is thrown but the UI doesnt handle it correctly, the control panel Menus are not displayed and the exception message is not displayed to the user.
How to throw an exception and handle it correctly in UI and display error message to the user.
Thanks
M
Andre Albert already gave you the correct hints in the comments.
You should keep the ModelListener and override the ActionCommand additionally.
First, read the tutorial about Overriding MVC Comands. When implementing your custom Command, use Liferay's implemenation as basis (don't forget to add the higher service.ranking) and replace the catch block with something like this:
// I took the freedom and refactored Liferay's catch block a little bit
catch (NoSuchUserException | PrincipalException e) {
SessionErrors.add(actionRequest, e.getClass());
actionResponse.setRenderParameter("mvcPath", "/error.jsp");
} catch (MembershipPolicyException e) {
SessionErrors.add(actionRequest, e.getClass(), e);
actionResponse.setRenderParameter("mvcPath", "/edit_user.jsp");
actionResponse.setRenderParameter("screenNavigationCategoryKey", UserFormConstants.CATEGORY_KEY_GENERAL);
actionResponse.setRenderParameter("screenNavigationEntryKey", UserFormConstants.ENTRY_KEY_ROLES);
} catch (ForbiddenRoleAssociationException e) {
// Here you can add a SessionError
// and set some render parameters
} catch (Exception e) {
throw e;
}
The ForbiddenRoleAssociationException does not exist yet. It's purpose is to distinguish this special case of a ModelListenerException from others which might not interest you. You'll have to implement it yourself. Just extend the ModelListenerException:
public class ForbiddenRoleAssociationException extends ModelListenerException {
// here might be some constructors
}
Now adjust your ModelListener so that it throws your new ForbiddenRoeAssociationException:
#Component(immediate = true, service = ModelListener.class)
public class TestUserModelListener extends BaseModelListener<User> {
#Override
public void onBeforeAddAssociation(Object classPK, String associationClassName, Objext accociationClassPK) throws ModelListenerException {
// ...
throw new ForbiddenRoleAssociationException(); // or any other constructor
}
}
This way you should be able to display error messages to admins (depending on your code in the catch block of the ForbiddenRoleAssociationException) and circumvent any other (programmatic) attempt to assign the Role as well.
I am working on a JavaFx application, there i have a script that extract a zip followed by some other operation like updating files etc.
I want to have a textArea that displays whats going on in background, like "Zip extracting...", "Updating xyz file" etc.
Till now i have tried following way:
MyTask<String> task;
task = new MyTask<String>() {
#Override
protected String call() throws Exception {
File path = new File(exportTo.getAbsolutePath());
updateMessage("Extracting modular app to target directory...");
patcher.unZip(appPath.getAbsolutePath(), path.getAbsolutePath());
if (path.exists()) {
AppInfo info = getAppInfo();
patcher.patchAndroid(info, resourceZip, new File(path.getAbsolutePath() + "/" + appPath.getName().substring(0, appPath.getName().lastIndexOf("."))), this);
showOkAlert("Build completed!");
} else {
showOkAlert("Modular app folder not found");
}
return "";
}
#Override
protected void updateProgress(double workDone, double max) {
patcher.reportLogs(message);
}
private String message;
#Override
public void updateMessage(final String message) {
Platform.runLater(() -> patcher.reportLogs(message));
this.message = message;
//updateProgress(0, 0);
}
};
task.run();
MyTask class
abstract class MyTask<T> extends Task<T> {
abstract public void updateMessage(String message);
}
I have tried using updateProgress method, Platform.runLater() but nothing is working.
All the message i printed in textArea are printed after all operation is done.
Please help.
As javadoc for Task states you need to manually create a Thread to execute your Task:
Thread th = new Thread(task);
th.start();
Currently your task is being run on Application UI thread and blocks UI updates.
I wanted to debug the Seed() method in my Entity Framework database configuration class when I run Update-Database from the Package Manager Console but didn't know how to do it. I wanted to share the solution with others in case they have the same issue.
Here is similar question with a solution that works really well.
It does NOT require Thread.Sleep.
Just Launches the debugger using this code.
Clipped from the answer
if (!System.Diagnostics.Debugger.IsAttached)
System.Diagnostics.Debugger.Launch();
The way I solved this was to open a new instance of Visual Studio and then open the same solution in this new instance of Visual Studio. I then attached the debugger in this new instance to the old instance (devenv.exe) while running the update-database command. This allowed me to debug the Seed method.
Just to make sure I didn't miss the breakpoint by not attaching in time I added a Thread.Sleep before the breakpoint.
I hope this helps someone.
If you need to get a specific variable's value, a quick hack is to throw an exception:
throw new Exception(variable);
A cleaner solution (I guess this requires EF 6) would IMHO be to call update-database from code:
var configuration = new DbMigrationsConfiguration<TContext>();
var databaseMigrator = new DbMigrator(configuration);
databaseMigrator.Update();
This allows you to debug the Seed method.
You may take this one step further and construct a unit test (or, more precisely, an integration test) that creates an empty test database, applies all EF migrations, runs the Seed method, and drops the test database again:
var configuration = new DbMigrationsConfiguration<TContext>();
Database.Delete("TestDatabaseNameOrConnectionString");
var databaseMigrator = new DbMigrator(configuration);
databaseMigrator.Update();
Database.Delete("TestDatabaseNameOrConnectionString");
But be careful not to run this against your development database!
I know this is an old question, but if all you want is messages, and you don't care to include references to WinForms in your project, I made some simple debug window where I can send Trace events.
For more serious and step-by-step debugging, I'll open another Visual Studio instance, but it's not necessary for simple stuff.
This is the whole code:
SeedApplicationContext.cs
using System;
using System.Data.Entity;
using System.Diagnostics;
using System.Drawing;
using System.Windows.Forms;
namespace Data.Persistence.Migrations.SeedDebug
{
public class SeedApplicationContext<T> : ApplicationContext
where T : DbContext
{
private class SeedTraceListener : TraceListener
{
private readonly SeedApplicationContext<T> _appContext;
public SeedTraceListener(SeedApplicationContext<T> appContext)
{
_appContext = appContext;
}
public override void Write(string message)
{
_appContext.WriteDebugText(message);
}
public override void WriteLine(string message)
{
_appContext.WriteDebugLine(message);
}
}
private Form _debugForm;
private TextBox _debugTextBox;
private TraceListener _traceListener;
private readonly Action<T> _seedAction;
private readonly T _dbcontext;
public Exception Exception { get; private set; }
public bool WaitBeforeExit { get; private set; }
public SeedApplicationContext(Action<T> seedAction, T dbcontext, bool waitBeforeExit = false)
{
_dbcontext = dbcontext;
_seedAction = seedAction;
WaitBeforeExit = waitBeforeExit;
_traceListener = new SeedTraceListener(this);
CreateDebugForm();
MainForm = _debugForm;
Trace.Listeners.Add(_traceListener);
}
private void CreateDebugForm()
{
var textbox = new TextBox {Multiline = true, Dock = DockStyle.Fill, ScrollBars = ScrollBars.Both, WordWrap = false};
var form = new Form {Font = new Font(#"Lucida Console", 8), Text = "Seed Trace"};
form.Controls.Add(tb);
form.Shown += OnFormShown;
_debugForm = form;
_debugTextBox = textbox;
}
private void OnFormShown(object sender, EventArgs eventArgs)
{
WriteDebugLine("Initializing seed...");
try
{
_seedAction(_dbcontext);
if(!WaitBeforeExit)
_debugForm.Close();
else
WriteDebugLine("Finished seed. Close this window to continue");
}
catch (Exception e)
{
Exception = e;
var einner = e;
while (einner != null)
{
WriteDebugLine(string.Format("[Exception {0}] {1}", einner.GetType(), einner.Message));
WriteDebugLine(einner.StackTrace);
einner = einner.InnerException;
if (einner != null)
WriteDebugLine("------- Inner Exception -------");
}
}
}
protected override void Dispose(bool disposing)
{
if (disposing && _traceListener != null)
{
Trace.Listeners.Remove(_traceListener);
_traceListener.Dispose();
_traceListener = null;
}
base.Dispose(disposing);
}
private void WriteDebugText(string message)
{
_debugTextBox.Text += message;
Application.DoEvents();
}
private void WriteDebugLine(string message)
{
WriteDebugText(message + Environment.NewLine);
}
}
}
And on your standard Configuration.cs
// ...
using System.Windows.Forms;
using Data.Persistence.Migrations.SeedDebug;
// ...
namespace Data.Persistence.Migrations
{
internal sealed class Configuration : DbMigrationsConfiguration<MyContext>
{
public Configuration()
{
// Migrations configuration here
}
protected override void Seed(MyContext context)
{
// Create our application context which will host our debug window and message loop
var appContext = new SeedApplicationContext<MyContext>(SeedInternal, context, false);
Application.Run(appContext);
var e = appContext.Exception;
Application.Exit();
// Rethrow the exception to the package manager console
if (e != null)
throw e;
}
// Our original Seed method, now with Trace support!
private void SeedInternal(MyContext context)
{
// ...
Trace.WriteLine("I'm seeding!")
// ...
}
}
}
Uh Debugging is one thing but don't forget to call:
context.Update()
Also don't wrap in try catch without a good inner exceptions spill to the console.
https://coderwall.com/p/fbcyaw/debug-into-entity-framework-code-first
with catch (DbEntityValidationException ex)
I have 2 workarounds (without Debugger.Launch() since it doesn't work for me):
To print message in Package Manager Console use exception:
throw new Exception("Your message");
Another way is to print message in file by creating a cmd process:
// Logs to file {solution folder}\seed.log data from Seed method (for DEBUG only)
private void Log(string msg)
{
string echoCmd = $"/C echo {DateTime.Now} - {msg} >> seed.log";
System.Diagnostics.Process.Start("cmd.exe", echoCmd);
}