I would like to connect to different shells (csh, ksh etc.,) and execute command inside each switched shell.
Following is the sample program which reflects my intention:
#!/bin/bash
echo $SHELL
csh
echo $SHELL
exit
ksh
echo $SHELL
exit
Since, i am not well versed with Shell scripting need a pointer on how to achieve this. Any help would be much appreciated.
If you want to execute only one single command, you can use the -c option
csh -c 'echo $SHELL'
ksh -c 'echo $SHELL'
If you want to execute several commands, or even a whole script in a child-shell, you can use the here-document feature of bash and use the -s (read commands from stdin) on the child shells:
#!/bin/bash
echo "this is bash"
csh -s <<- EOF
echo "here go the commands for csh"
echo "and another one..."
EOF
echo "this is bash again"
ksh -s <<- EOF
echo "and now, we're in ksh"
EOF
Note that you can't easily check the shell you are in by echo $SHELL, because the parent shell expands this variable to the text /././bash. If you want to be sure that the child shell works, you should check if a shell-specific syntax is working or not.
It is possible to use the command line options provided by each shell to run a snippet of code.
For example, for bash use the -c option:
bash -c $code
bash -c 'echo hello'
zsh and fish also use the -c option.
Other shells will state the options they use in their man pages.
You need to use the -c command line option if you want to pass commands on bash startup:
#!/bin/bash
# We are in bash already ...
echo $SHELL
csh -c 'echo $SHELL'
ksh -c 'echo $SHELL'
You can pass arbitrary complex scripts to a shell, using the -c option, as in
sh -c 'echo This is the Bourne shell.'
You will save you a lot of headaches related to quotes and variable expansion if you wrap the call in a function reading the script on stdin as:
execute_with_ksh()
{
local script
script=$(cat)
ksh -c "${script}"
}
prepare_complicated_script()
{
# Write shell script on stdout,
# for instance by cat-ting a here-document.
cat <<'EOF'
echo ${SHELL}
EOF
}
prepare_complicated_script | execute_with_ksh
The advantage of this method is that it easy to insert a tee in the pipe or to break the pipe to control the script being passed to the shell.
If you want to execute the script on a remote host through ssh you should consider encode your script in base 64 to transmit it safely to the remote shell.
Related
I have a test.sh file which takes as a parameter a bash command, it does some logic, i.e. setting and checking some env vars, and then executes that input command.
#!/bin/bash
#Some other logic here
echo "Run command: $#"
eval "$#"
When I run it, here's the output
% ./test.sh echo "ok"
Run command: echo ok
ok
But the issue is, when I pass something like sh -c 'echo "ok"', I don't get the output.
% ./test.sh sh -c 'echo "ok"'
Run command: sh -c echo "ok"
%
So I tried changing eval with exec, tried to execute $# directly (without eval or exec), even tried to execute it and save the output to a variable, still no use.
Is there any way to run the passed command in this format and get the ourput?
Use case:
The script is used as an entrypoint for the docker container, it receives the parameters from docker CMD and executes those to run the container.
As a quickfix I can remove the sh -c and pass the command without it, but I want to make the script reusable and not to change the commands.
TL;DR:
This is a typical use case (perform some business logic in a Docker entrypoint script before running a compound command, given at command line) and the recommended last line of the script is:
exec "$#"
Details
To further explain this line, some remarks and hyperlinks:
As per the Bash user manual, exec is a POSIX shell builtin that replaces the shell [with the command supplied] without creating a new process.
As a result, using exec like this in a Docker entrypoint context is important because it ensures that the CMD program that is executed will still have PID 1 and can directly handle signals, including that of docker stop (see also that other SO answer: Speed up docker-compose shutdown).
The double quotes ("$#") are also important to avoid word splitting (namely, ensure that each positional argument is passed as is, even if it contains spaces). See e.g.:
#!/usr/bin/env bash
printargs () { for arg; do echo "$arg"; done; }
test0 () {
echo "test0:"
printargs $#
}
test1 () {
echo "test1:"
printargs "$#"
}
test0 /bin/sh -c 'echo "ok"'
echo
test1 /bin/sh -c 'echo "ok"'
test0:
/bin/sh
-c
echo
"ok"
test1:
/bin/sh
-c
echo "ok"
Finally eval is a powerful bash builtin that is (1) unneeded for your use case, (2) and actually not advised to use in general, in particular for security reasons. E.g., if the string argument of eval relies on some user-provided input… For details on this issue, see e.g. https://mywiki.wooledge.org/BashFAQ/048 (which recaps the few situations where one would like to use this builtin, typically, the command eval "$(ssh-agent -s)").
I have a big script (call it test) that, after stripping out the unrelated parts, comes down to just this using which I can explain my question:
#!/bin/bash
bash -c "$#"
This doesn't work as expected. E.g. ./test echo hi executes the only the echo and the argument disappears!
Testing with various inputs I can see only $1 is passed to bash -c ... and rest are discarded.
But if I use a variable like:
#!/bin/bash
cmd="$#"
bash -c "$cmd"
it works as expected for all inputs.
Questions:
1) I would like to understand why the double quotes don't "pass" the entire command line arguments to bash -c .... What am I missing here (that it works perfectly fine when using an intermediate variable)?
2) Why does bash discard the rest of the arguments (except $1) without any error messages?
For example:
bash -c "ls" -l -a hi hello blah
simply runs echo and hi hello blah doesn't result in any errors at all?
(If possible, please refer to the bash grammar where this behaviour is documented).
1) I would like to understand why the double quotes don't "pass" the entire command line arguments to bash -c .... What am I missing here (that it works perfectly fine when using an intermediate variable)?
From info bash #:
#
($#) Expands to the positional parameters, starting from one. When the expansion occurs within double quotes, each parameter expands
to a separate word. That is, "$#" is equivalent to "$1" "$2" ....
Thus, bash -c "$#" is equivalent to bash -c "$1" "$2" .... In the case of ./test echo hi invocation, the expression is expanded to
bash -c "echo" "hi"
2) Why does bash discard the rest of the arguments (except $1) without any error messages?
Bash actually doesn't discard anything. From man bash:
If the -c option is present, then commands are read from the first non-option argument command_string. If there are arguments after the command_string, they are assigned to the positional parameters, starting with $0.
Thus, for the command bash -c "echo" "hi", Bash passes "hi" as $0 for the "echo" script.
bash -c "ls" -l -a hi hello blah
simply runs echo and hi hello blah doesn't result in any errors at all?
According to the rules mentioned above, Bash executes "ls" script and passes the following positional parameters to this script:
$0: "-l"
$1: "-a"
$2: "hi"
$3: "hello"
$4: "blah"
Thus, the command actually executes ls, and the positional parameters are unused in the script. You can use them by referencing to the positional parameters, e.g.:
$ set -x
$ bash -c "ls \$0 \$1 \$3" -l -a hi hello blah
+ bash -c 'ls $0 $1 $3' -l -a hi hello blah
ls: cannot access hello: No such file or directory
You should be using $* instead of $# to pass command line as string. "$#" expands to multiple quoted arguments and "$*" combines multiple arguments into a single argument.
#!/bin/bash
bash -c "$*"
Problem is with your $# it executes:
bash -c echo hi
But with $* it executes:
bash -c 'echo hi'
When you use:
cmd="$#"
and use: bash -c "$cmd" it does the same thing for you.
Read: What is the difference between “$#” and “$*” in Bash?
In my Bash CGI script, I take a command passed as GET parameter and execute it. This could be:
CMD='ls -al'
$CMD
Which works fine and produces expected output. But if I try to pass two commands with
CMD='ls -al; echo hello'
$CMD
or
CMD='ls -al && echo hello'
$CMD
neither command gets executed.
How can I run multiple commands from the same line/variable in my bash CGI?
You can execute variables as bash code using bash:
# UNSAFE, DO NOT USE
cmd='ls -al; echo hello'
bash -c "$cmd"
Alternatively, depending on the context you want to run it in, you can use eval "$cmd" to run it as if it was a line in your own script, rather than a separate piece of shell code to execute:
# UNSAFE, DO NOT USE
cmd='ls -al; echo hello'
eval "$cmd"
Both of these methods have serious implications for security and correctness, so I felt I had to add warnings to prevent them from being copied out of context.
For your remote shell or root kit specifically meant to run insecure user input, you can ignore the warnings.
I know that to debug script I can issue command
set -x
on the first line. The problem is that when script launches some other scripts they do not inherit this setting. So my question is whether there is some possibility to set this flag globally for shell and all subshells or for some script and all scripts launched by it?
In Bash you can use export SHELLOPTS. It will make all Bash subshells inherit the -x option (as well as all the other options in SHELLOPTS!).
Example:
export SHELLOPTS
bash -x script1.sh
See bash recursive xtrace
It depends, you call call your subshells with -x too,
Put the set -x inside the Shell script
$ cat shell1.sh
echo "Shell1"
$ cat shell2.sh
#!/bin/bash
set -x
./shell1.sh
echo "shell2.sh"
$ ./shell2.sh
+ ./shell1.sh
Shell1
+ echo shell2.sh
shell2.sh
I try to do string replacement in linux shell,
str=2011/10/10
echo "$str"
a=${str//\//\_}
echo $a
It can execute when I invoke command : ./test.sh
But if I run it in nohup mode, using command : nohup ./test.sh &
It says that
./test.sh: 8: Bad substitution
What's wrong here ?
Thanks
Since you have no #!/bin/bash at the top of your script, the 'nohup' command is using /bin/sh and your system's /bin/sh isn't BASH. Your first and third lines where you assign 'str' and 'a' are not correct Bourne syntax.
Since you likely want to use BASH and not a shell that uses strict Bourne syntax, you should add a #! line at the top of your script like this:
#!/bin/bash
str=2011/10/10
echo "$str"
a=${str//\//\_}
echo $a