I try to do string replacement in linux shell,
str=2011/10/10
echo "$str"
a=${str//\//\_}
echo $a
It can execute when I invoke command : ./test.sh
But if I run it in nohup mode, using command : nohup ./test.sh &
It says that
./test.sh: 8: Bad substitution
What's wrong here ?
Thanks
Since you have no #!/bin/bash at the top of your script, the 'nohup' command is using /bin/sh and your system's /bin/sh isn't BASH. Your first and third lines where you assign 'str' and 'a' are not correct Bourne syntax.
Since you likely want to use BASH and not a shell that uses strict Bourne syntax, you should add a #! line at the top of your script like this:
#!/bin/bash
str=2011/10/10
echo "$str"
a=${str//\//\_}
echo $a
Related
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
This bash script gives me Bad substitution error on ubuntu. Any help will be highly appreciated.
The default shell (/bin/sh) under Ubuntu points to dash, not bash.
me#pc:~$ readlink -f $(which sh)
/bin/dash
So if you chmod +x your_script_file.sh and then run it with ./your_script_file.sh, or if you run it with bash your_script_file.sh, it should work fine.
Running it with sh your_script_file.sh will not work because the hashbang line will be ignored and the script will be interpreted by dash, which does not support that string substitution syntax.
I had the same problem. Make sure your script didnt have
#!/bin/sh
at the top of your script. Instead, you should add
#!/bin/bash
For others that arrive here, this exact message will also appear when using the env variable syntax for commands, for example ${which sh} instead of the correct $(which sh)
Your script syntax is valid bash and good.
Possible causes for the failure:
Your bash is not really bash but ksh or some other shell which doesn't understand bash's parameter substitution. Because your script looks fine and works with bash.
Do ls -l /bin/bash and check it's really bash and not sym-linked to some other shell.
If you do have bash on your system, then you may be executing your script the wrong way like: ksh script.sh or sh script.sh (and your default shell is not bash). Since you have proper shebang, if you have bash ./script.sh or bash ./script.sh should be fine.
Try running the script explicitly using bash command rather than just executing it as executable.
Also, make sure you don't have an empty string for the first line of your script.
i.e. make sure #!/bin/bash is the very first line of your script.
Not relevant to your example, but you can also get the Bad substitution error in Bash for any substitution syntax that Bash does not recognize. This could be:
Stray whitespace. E.g. bash -c '${x }'
A typo. E.g. bash -c '${x;-}'
A feature that was added in a later Bash version. E.g. bash -c '${x#Q}' before Bash 4.4.
If you have multiple substitutions in the same expression, Bash may not be very helpful in pinpointing the problematic expression. E.g.:
$ bash -c '"${x } multiline string
$y"'
bash: line 1: ${x } multiline string
$y: bad substitution
Both - bash or dash - work, but the syntax needs to be:
FILENAME=/my/complex/path/name.ext
NEWNAME=${FILENAME%ext}new
I was adding a dollar sign twice in an expression with curly braces in bash:
cp -r $PROJECT_NAME ${$PROJECT_NAME}2
instead of
cp -r $PROJECT_NAME ${PROJECT_NAME}2
I have found that this issue is either caused by the marked answer or you have a line or space before the bash declaration
Looks like "+x" causes problems:
root#raspi1:~# cat > /tmp/btest
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
root#raspi1:~# chmod +x /tmp/btest
root#raspi1:~# /tmp/btest
root#raspi1:~# sh -x /tmp/btest
+ jobname=job_201312161447_0003
/tmp/btest: 4: /tmp/btest: Bad substitution
in my case (under ubuntu 18.04), I have mixed $( ${} ) that works fine:
BACKUPED_NB=$(ls ${HOST_BACKUP_DIR}*${CONTAINER_NAME}.backup.sql.gz | wc --lines)
full example here.
I used #!bin/bash as well tried all approaches like no line before or after #!bin/bash.
Then also tried using +x but still didn't work.
Finally i tried running the script ./script.sh it worked fine.
#!/bin/bash
jobname="job_201312161447_0003"
jobname_post=${jobname:17}
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# sh jaru.sh
jaru.sh: 3: jaru.sh: Bad substitution
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# ./jaru.sh
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts#
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
This bash script gives me Bad substitution error on ubuntu. Any help will be highly appreciated.
The default shell (/bin/sh) under Ubuntu points to dash, not bash.
me#pc:~$ readlink -f $(which sh)
/bin/dash
So if you chmod +x your_script_file.sh and then run it with ./your_script_file.sh, or if you run it with bash your_script_file.sh, it should work fine.
Running it with sh your_script_file.sh will not work because the hashbang line will be ignored and the script will be interpreted by dash, which does not support that string substitution syntax.
I had the same problem. Make sure your script didnt have
#!/bin/sh
at the top of your script. Instead, you should add
#!/bin/bash
For others that arrive here, this exact message will also appear when using the env variable syntax for commands, for example ${which sh} instead of the correct $(which sh)
Your script syntax is valid bash and good.
Possible causes for the failure:
Your bash is not really bash but ksh or some other shell which doesn't understand bash's parameter substitution. Because your script looks fine and works with bash.
Do ls -l /bin/bash and check it's really bash and not sym-linked to some other shell.
If you do have bash on your system, then you may be executing your script the wrong way like: ksh script.sh or sh script.sh (and your default shell is not bash). Since you have proper shebang, if you have bash ./script.sh or bash ./script.sh should be fine.
Try running the script explicitly using bash command rather than just executing it as executable.
Also, make sure you don't have an empty string for the first line of your script.
i.e. make sure #!/bin/bash is the very first line of your script.
Not relevant to your example, but you can also get the Bad substitution error in Bash for any substitution syntax that Bash does not recognize. This could be:
Stray whitespace. E.g. bash -c '${x }'
A typo. E.g. bash -c '${x;-}'
A feature that was added in a later Bash version. E.g. bash -c '${x#Q}' before Bash 4.4.
If you have multiple substitutions in the same expression, Bash may not be very helpful in pinpointing the problematic expression. E.g.:
$ bash -c '"${x } multiline string
$y"'
bash: line 1: ${x } multiline string
$y: bad substitution
Both - bash or dash - work, but the syntax needs to be:
FILENAME=/my/complex/path/name.ext
NEWNAME=${FILENAME%ext}new
I was adding a dollar sign twice in an expression with curly braces in bash:
cp -r $PROJECT_NAME ${$PROJECT_NAME}2
instead of
cp -r $PROJECT_NAME ${PROJECT_NAME}2
I have found that this issue is either caused by the marked answer or you have a line or space before the bash declaration
Looks like "+x" causes problems:
root#raspi1:~# cat > /tmp/btest
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
root#raspi1:~# chmod +x /tmp/btest
root#raspi1:~# /tmp/btest
root#raspi1:~# sh -x /tmp/btest
+ jobname=job_201312161447_0003
/tmp/btest: 4: /tmp/btest: Bad substitution
in my case (under ubuntu 18.04), I have mixed $( ${} ) that works fine:
BACKUPED_NB=$(ls ${HOST_BACKUP_DIR}*${CONTAINER_NAME}.backup.sql.gz | wc --lines)
full example here.
I used #!bin/bash as well tried all approaches like no line before or after #!bin/bash.
Then also tried using +x but still didn't work.
Finally i tried running the script ./script.sh it worked fine.
#!/bin/bash
jobname="job_201312161447_0003"
jobname_post=${jobname:17}
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# sh jaru.sh
jaru.sh: 3: jaru.sh: Bad substitution
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# ./jaru.sh
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts#
I would like to connect to different shells (csh, ksh etc.,) and execute command inside each switched shell.
Following is the sample program which reflects my intention:
#!/bin/bash
echo $SHELL
csh
echo $SHELL
exit
ksh
echo $SHELL
exit
Since, i am not well versed with Shell scripting need a pointer on how to achieve this. Any help would be much appreciated.
If you want to execute only one single command, you can use the -c option
csh -c 'echo $SHELL'
ksh -c 'echo $SHELL'
If you want to execute several commands, or even a whole script in a child-shell, you can use the here-document feature of bash and use the -s (read commands from stdin) on the child shells:
#!/bin/bash
echo "this is bash"
csh -s <<- EOF
echo "here go the commands for csh"
echo "and another one..."
EOF
echo "this is bash again"
ksh -s <<- EOF
echo "and now, we're in ksh"
EOF
Note that you can't easily check the shell you are in by echo $SHELL, because the parent shell expands this variable to the text /././bash. If you want to be sure that the child shell works, you should check if a shell-specific syntax is working or not.
It is possible to use the command line options provided by each shell to run a snippet of code.
For example, for bash use the -c option:
bash -c $code
bash -c 'echo hello'
zsh and fish also use the -c option.
Other shells will state the options they use in their man pages.
You need to use the -c command line option if you want to pass commands on bash startup:
#!/bin/bash
# We are in bash already ...
echo $SHELL
csh -c 'echo $SHELL'
ksh -c 'echo $SHELL'
You can pass arbitrary complex scripts to a shell, using the -c option, as in
sh -c 'echo This is the Bourne shell.'
You will save you a lot of headaches related to quotes and variable expansion if you wrap the call in a function reading the script on stdin as:
execute_with_ksh()
{
local script
script=$(cat)
ksh -c "${script}"
}
prepare_complicated_script()
{
# Write shell script on stdout,
# for instance by cat-ting a here-document.
cat <<'EOF'
echo ${SHELL}
EOF
}
prepare_complicated_script | execute_with_ksh
The advantage of this method is that it easy to insert a tee in the pipe or to break the pipe to control the script being passed to the shell.
If you want to execute the script on a remote host through ssh you should consider encode your script in base 64 to transmit it safely to the remote shell.
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
This bash script gives me Bad substitution error on ubuntu. Any help will be highly appreciated.
The default shell (/bin/sh) under Ubuntu points to dash, not bash.
me#pc:~$ readlink -f $(which sh)
/bin/dash
So if you chmod +x your_script_file.sh and then run it with ./your_script_file.sh, or if you run it with bash your_script_file.sh, it should work fine.
Running it with sh your_script_file.sh will not work because the hashbang line will be ignored and the script will be interpreted by dash, which does not support that string substitution syntax.
I had the same problem. Make sure your script didnt have
#!/bin/sh
at the top of your script. Instead, you should add
#!/bin/bash
For others that arrive here, this exact message will also appear when using the env variable syntax for commands, for example ${which sh} instead of the correct $(which sh)
Your script syntax is valid bash and good.
Possible causes for the failure:
Your bash is not really bash but ksh or some other shell which doesn't understand bash's parameter substitution. Because your script looks fine and works with bash.
Do ls -l /bin/bash and check it's really bash and not sym-linked to some other shell.
If you do have bash on your system, then you may be executing your script the wrong way like: ksh script.sh or sh script.sh (and your default shell is not bash). Since you have proper shebang, if you have bash ./script.sh or bash ./script.sh should be fine.
Try running the script explicitly using bash command rather than just executing it as executable.
Also, make sure you don't have an empty string for the first line of your script.
i.e. make sure #!/bin/bash is the very first line of your script.
Not relevant to your example, but you can also get the Bad substitution error in Bash for any substitution syntax that Bash does not recognize. This could be:
Stray whitespace. E.g. bash -c '${x }'
A typo. E.g. bash -c '${x;-}'
A feature that was added in a later Bash version. E.g. bash -c '${x#Q}' before Bash 4.4.
If you have multiple substitutions in the same expression, Bash may not be very helpful in pinpointing the problematic expression. E.g.:
$ bash -c '"${x } multiline string
$y"'
bash: line 1: ${x } multiline string
$y: bad substitution
Both - bash or dash - work, but the syntax needs to be:
FILENAME=/my/complex/path/name.ext
NEWNAME=${FILENAME%ext}new
I was adding a dollar sign twice in an expression with curly braces in bash:
cp -r $PROJECT_NAME ${$PROJECT_NAME}2
instead of
cp -r $PROJECT_NAME ${PROJECT_NAME}2
I have found that this issue is either caused by the marked answer or you have a line or space before the bash declaration
Looks like "+x" causes problems:
root#raspi1:~# cat > /tmp/btest
#!/bin/bash
jobname="job_201312161447_0003"
jobname_pre=${jobname:0:16}
jobname_post=${jobname:17}
root#raspi1:~# chmod +x /tmp/btest
root#raspi1:~# /tmp/btest
root#raspi1:~# sh -x /tmp/btest
+ jobname=job_201312161447_0003
/tmp/btest: 4: /tmp/btest: Bad substitution
in my case (under ubuntu 18.04), I have mixed $( ${} ) that works fine:
BACKUPED_NB=$(ls ${HOST_BACKUP_DIR}*${CONTAINER_NAME}.backup.sql.gz | wc --lines)
full example here.
I used #!bin/bash as well tried all approaches like no line before or after #!bin/bash.
Then also tried using +x but still didn't work.
Finally i tried running the script ./script.sh it worked fine.
#!/bin/bash
jobname="job_201312161447_0003"
jobname_post=${jobname:17}
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# sh jaru.sh
jaru.sh: 3: jaru.sh: Bad substitution
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts# ./jaru.sh
root#ip-10-2-250-36:/home/bitnami/python-module/workflow_scripts#
I'm trying some staff that is working perfectly when I write it in the regular shell, but when I include it in a bash script file, it doesn't.
First example:
m=`date +%m`
m_1=$((m-1))
echo $m_1
This gives me the value of the last month (actual minus one), but doesn't work if its executed from a script.
Second example:
m=6
m=$m"t"
echo m
This returns "6t" in the shell (concatenates $m with "t"), but just gives me "t" when executing from a script.
I assume all these may be answered easily by an experienced Linux user, but I'm just learning as I go.
Thanks in advance.
Re-check your syntax.
Your first code snippet works either from command line, from bash and from sh since your syntax is valid sh. In my opinion you probably have typos in your script file:
~$ m=`date +%m`; m_1=$((m-1)); echo $m_1
4
~$ cat > foo.sh
m=`date +%m`; m_1=$((m-1)); echo $m_1
^C
~$ bash foo.sh
4
~$ sh foo.sh
4
The same can apply to the other snippet with corrections:
~$ m=6; m=$m"t"; echo $m
6t
~$ cat > foo.sh
m=6; m=$m"t"; echo $m
^C
~$ bash foo.sh
6t
~$ sh foo.sh
6t
Make sure the first line of your script is
#!/bin/bash
rather than
#!/bin/sh
Bash will only enable its extended features if explicitly run as bash. If run as sh, it will operate in POSIX compatibility mode.
First of all, it works fine for me in a script, and on the terminal.
Second of all, your last line, echo m will just output "m". I think you meant "$m"..